Search results

The conventional two-level inverter suffers from harmonics, higher direct current (DC) link voltage requirement, higher dv/dt and heating of the rotor. This study aims to overcome by using a multilevel inverter for brushless DC (BLDC) drive.

This paper presents a comparative analysis of the conventional two-level and three-level multilevel inverter for electric vehicle (EV) application using BLDC drive.

A three-level Active Neutral Point Clamped Multilevel inverter (ANPCMLI) is proposed in this paper which provides DC link voltage control. Simulation studies of the multilevel inverter and BLDC motor is carried out in MATLAB.

The ANPCMLI fed BLDC simulation results shows that there is the significant reduction in the BLDC motor torque ripple, switching stress and harmonic distortion in the BLDC motor fed ANPCMLI compared to the conventional two-level inverter. A prototype of ANPCMLI fed BLDC drive along with field programmable gate array (FPGA) control is built and MATLAB simulation results are verified experimentally.

The puspose of this paper, a novel systematic design of fractional order proportional integral derivative (FOPID) controller-based speed control of sensorless brushless DC (BLDC) motor using multi-objective enhanced genetic algorithm (EGA). This scheme provides an excellent dynamic and static response, low computational burden, the robust speed control.

The EGA is a meta-heuristic-inspired algorithm for solving non-linearity problems such as sudden load disturbances, modeling errors, power fluctuations, poor stability, the maximum time of transient processes, static and dynamic errors. The conventional genetic algorithm (CGA) and modified genetic algorithm (MGA) are not very effective in solving the above-mentioned problems. Hence, a multi-objective EGA optimized FOPID (EGA-FOPID) controller is proposed for speed control of sensorless BLDC motor under various conditions such as constant load conditions, varying load conditions, varying set speed (Ns) conditions, integrated conditions and controller parameters uncertainty.

This systematic design of the multi-objective EGA-FOPID controller is implemented in MATLAB 2020a with Simulink models for optimal speed control of the BLDC motor. The overall performance of the EGA-FOPID controller is observed and evaluated for computational burden, time integral performance indexes, transient and steady-state characteristics. The hardware experiment results confirm that the proposed EGA-FOPID controller can precisely change the BLDC motor speed is desired range with minimal effort.

The conventional real time issues such as nonlinearity characteristics, poor controllability and stability.

It is clearly evident that out of these three intelligent controllers, the EGA optimized FOPID controller gives enhanced performance by minimizing the time domain parameters, performance Indices error and convergence time. Also, the hardware experimental setup and the results of the proposed EGA-FOPID controller are presented.

It shows the effectiveness of the proposed controllers is completely verified by comparing the above three intelligent optimization algorithms. It is clearly evident that out of these three intelligent controllers, the EGA optimized FOPID controller gives enhanced performance by minimizing the time domain parameters, performance Indices error and convergence time. Also, the hardware experimental setup and the results of the proposed EGA-FOPID controller are presented.

Switching power converters for photovoltaic (PV) applications with high gain are rapidly expanding. To obtain better voltage gain, low switch stress, low ripple and cost-effective converters, researchers are developing several topologies.

It was decided to use the particle swarm optimization approach for this system in order to compute the precise PI controller gain parameters under steady state and dynamic changing circumstances. A high-gain q- ZS boost converter is used as an intermittent converter between a PV and brushless direct current (BLDC) motor to attain maximum power point tracking, which also reduces the torque ripples. A MATLAB/Simulink environment has been used to build and test the positive output quadratic boost high gain converters (PQBHGC)-1, PQBHGC-8, PQBHGC-4 and PQBHGC-3 topologies to analyse their effectiveness in PV-driven BLDC motor applications. The simulation results show that the PQBHGC-3 topology is effective in comparison with other HG cell DC–DC converters in terms of efficiency, reduced ripples, etc. which is most suitable for PV-driven BLDC applications.

The simulation results have showed that the PQBHGC-3 gives better performance with minimum voltage ripple of 2V and current ripple of 0.4A which eventually reduces the ripples in the torque in a BLDC motor. Also, the efficiency for the suggested PQBHGC-3 for PV-based BLDC applications is the best with 99%.

This study is the first of its kind comparing the different topologies of PQBHGC-1, PQBHGC-8, PQBHGC-4 and PQBHGC-3 topologies to analyse their effectiveness in PV-driven BLDC motor applications. This study suggests that the PQBHGC-3 topology is most suitable in PV-driven BLDC applications.

The principal intention behind the activity is to regulate the speed, current and commutation of the brushless DC (BLDC) motor. Thereby, the authors can control the torque.

In order to regulate the current and speed of the motor, the Multi-resolution PID (MRPID) controller is proposed. The altered Landsman converter is utilized in this proposed suppression circuit, and the obligation cycle is acclimated to acquire the ideal DC-bus voltage dependent on the speed of the BLDC motor. The adaptive neuro-fuzzy inference system-elephant herding optimization (ANFIS-EHO) calculation mirrors the conduct of the procreant framework in families.

Brushless DC motor's dynamic properties are created, noticed and examined by MATLAB/Simulink model. The performance will be compared with existing genetic algorithms.

The presented approach and performance will be compared with existing genetic algorithms and optimization of different structure of BLDC motor.

The purpose of this paper is to develop a generalized observer and controller for brushless direct current (BLDC) motor to make the system more robust for parameter variations, load torque and speed tracking.

A robust interconnection and damping assignment passivity-based control (IDA-PBC) technique for BLDC motor is introduced in this paper. The IDA-PBC is used to obtain the reference voltages for pulse width modulation (PWM) control. The immersion and invariance (I&I) observer is used to estimate the load torque and speed of the BLDC motor. At the time of starting, the motor rotates in arbitrary direction, and sometimes, because of the cogging action, it may take a huge current. Therefore, a new start-up method is proposed for the BLDC motor, which maintains the alignment of the rotor.

From the simulation and experimental results, it can be seen that the proposed controller and observer satisfactorily work for parameter variations, load torque and speed tracking.

The authenticity of the proposed technique is tested experimentally on two different BLDC motors using low-cost 32-bit STM32F407VG microcontroller. The response of the proposed technique is evaluated by changing motor parameters such as stator resistance, inductance, flux linkage constant and torque constant.

The efficient speed controller is found to be an important requirement to run the motor for the brushless direct current (BLDC) motor. This requirement is considered as superior, as it may increase the operating speed and system efficiency. In the existing methods, proportional plus integral (PI) controller has been included because of its simple architecture. But the PI controller produces load disturbance, control complexity and some parametric (Proportional plus integral) variations. The purpose of this proposed controller is to overcome the problems produced by PI controller in BLDC motor.

The proposed BLDC motor is developed with fixed order H-infinity controller. In this architecture, both the weight functions and transfer functions were included to design the controller. This controller has been included in this BLDC to detect the rotor position. The optimal position of rotor is identified by introducing particle swarm optimization algorithm.

The torque that obtained in the motor is highly reduced by this proposed controller and also enhances the speed. The BLDC motor is modelled in a MATLAB environment.

The performance of the torque, speed and back electro-motive force is analysed and compared with the existing controllers such as fuzzy proportional plus integral plus derivative, sensing algorithm and fuzzy proportional plus derivative controller.

Simulation results show that the proposed technique gives better results than the other existing controllers.

The brushless direct current motor (BLDCM) is widely accepted and adopted by many industries instead of direct current motors due to high reliability during operation. Brushless direct current (BLDC) has outstanding efficiency as losses that arise out of voltage drops at brushes and friction losses are eliminated. The main factor that affects the performance is temperature introduced in the internal copper core windings. The control of motor speed generates high temperature in BLDC operation. The high temperature is due to presence of ripples in the operational current. The purpose is to present an effective controlling mechanism for speed management and to improve the performance of BLDCM to activate effective management of speed.

The purpose is to present an optimal algorithm based on modified moth-flame optimization algorithm over recurrent neural network (MMFO-RNN) for speed management to improve the performance. The core objective of the presented work is to achieve improvement in performance without affecting the design of the system with no additional circuitry. The management of speed in BLDCM has been achieved through reduction or minimization of ripples encircled with torque of the motor. The implementation ends in two stages, namely, controlling the loop of torque and controlling the loop of speed. The MMFO-RNN starts with error optimization, which arises from both the loops, and most effective values have been achieved through MMFO-RNN protocol.

The parameters are enriched with Multi Resolution Proportional Integral and Derivative (MRPID) controller operation to achieve minimal ripples for the torque of BLDC and manage the speed of the motor. The performance is increased by adopting this technique approximately 12% in comparison with the existing methodology, which is the main contributions of the presented work. The outcomes are analyzed with the existing methodologies through MATLAB Simulink tool, and the comparative analyses suggest that better performance of the proposed system produces over existing techniques, and proto type model is developed and cross verifies the proposed system.

The MMFO-RNN starts with error optimization, which arises from both the loops, and most effective values have been achieved through MMFO-RNN protocol. The parameters are enriched with MRPID controller operation to achieve nil or minimal ripples and to encircle the torque of Brushless Direct Current and manage the speed.

The purpose of this paper is to elaborate a method of computer analysis of high‐speed motor with specific parameters and verifying the obtained results, i.e. computer models by experimental (laboratory) tests.

In order to determine motor properties from the viewpoint of energy conversion, a model using FEM was worked out with the help of Maxwell software. To determine static and dynamic properties of both motor and drive, Matlab/Simulink models were used; one of these models was a built‐in (library) model, the other one was proposed by the authors.

The new analysis method and model of high‐speed motor have been carried out.

The permanent magnet brushless direct current high‐speed motor was the subject of the research. In the first part of the research, the properties of the motor were determined by using finite element method.

The laboratory prototype can be a starting point in establishing the production of the high‐speed motors with rotational speed in the range of 50,000‐100,000 rpm.

At this moment, there are several possible application of the high‐speed motor and it should be expected that other new applications can appear in near future after the start of the production.

The paper shows that the computer‐based analysis method determines the motor properties accurately. It is also pointed out that a motor with half‐open slots has advantageous properties. The new simulation model of high‐speed motor has been carried out. This model allows taking into account some imperfections caused by slots and rectangular cross‐section magnets.

This study aims to extend the driving range by on-board charging with use of photovoltaic (PV) source, avoiding the dependency on the grid supply and energy storage system in addition to that reduce the conversion complexity influenced on converter section of electric vehicle (EV) system.

This paper proposed a PV fed integrated converter topology called integrated single-input multi-output (I-SIMO) converter with enriched error tolerant fuzzy logic controller (EET-FLC) based control technique to regulate the speed of brushless direct current motor drive. I-SIMO converter provides both direct current (DC) and alternating current (AC) outputs from a single DC input source depending on the operation mode. It comprises two modes of operation, act as DC–DC converter in vehicle standby mode and DC–AC converter in vehicles driving mode.

The use of PV panels in the vehicle helps to reduce dependence of grid supply as well as vehicle’s batteries. The proposed topology has to remove the multiple power conversion stages in EV system, reduce components count and provide dual outputs for enhancement of performance of EV system.

The proposed topology leads to reduction of switching losses and stresses across the components of the converter and provides reduction in system complexity and overall expenditure. So, it enhances the converter reliability and also improves the efficiency. The converter provides ripple-free output voltage under dynamic load condition. The performance of EET-FLC is studied by taking various performance measures such as rise time, peak time, settling time and peak overshoot and compared with conventional control designs.

This paper aims to present an improvement to the power quality of the grid by using a colliding body optimization (CBO) based proportional-integral (PI) compensated design for a grid-connected solar photovoltaic-fed brushless DC motor (BLDC)-driven water pumping system with a bidirectional power flow control. The system with bidirectional power flow allows driving the pump at full proportions uninterruptedly irrespective of the weather conditions and feeding a grid when water pumping is not required.

Here, power quality issue is taken care of by the optimal generation of the duty cycle of the voltage source converter. The duty cycle is optimally generated by optimal selection of the gains of the current controller (i.e. PI), with the CBO technique resulting in a nearly unity power factor as well as lower total harmonic distortion (THD) of input current. In the CBO technique, the gains of the PI controller are considered as agents and collide with each other to obtain the best value. The system is simulated using MATLAB/Simulink and validated in real time with OPAL RT simulator, OP5700.

It was found that the power quality of grid using the CBO technique has improved much better than the particle swarm optimization and Zeigler–Nichols approach. The bidirectional flow of control of VSC allowed for optimum resource utilization and full capacity of water pumping whatever may be weather conditions.

Improved power quality of grid by optimally generation of the duty cycle for the proposed system. A unit vector tamplate generation technique is used for bidirectional power transfer.