Search results

In this paper, we propose a new way for the determination of a_w in fresh and salt meat. The principle is founded on the analysis of a small air volume inside the product. First we describe the fundamental definition of water activity, the state‐of‐the‐art of commercial a_w meters, the effects of a_w on microbiology in food. In the second step, after a description of the sensor, the principle and the procedure of measurement are explained. The measurements of a_w are realized in meat at different stages of drying. Reproducibility and the temperature effect are particularly analyzed.

In this work an original humidity sensor is described. It is based on the study of Seebeck voltage evolution during the water evaporation of a micro‐module Peltier (MMP). The measurement principle is to detect (after cooling) the small temperature decrease created when total water evaporation occurs over the MMP. All the active thin layers of the sensor are made from (Bi₂Te₃)_0.9(Bi₂Se₃)_0.1 (N) films and (Bi₂Te₃)_0.25(Sb₂Te₃)_0.75 (P) films flash evaporated. Experimental measures were performed in a climatic chamber for several values of relative humidity (50 to 90 per cent). The phenomenon (evaporation) appears after a delay time τ. This delay time is the response time of the sensor. Therefore it is possible to draw the evaporation delay time as a function of relative humidity.

This article describes a new humidity sensor using the technique of differential thermal analysis (DTA). The energy of water vaporisation is estimated via the measurement of the Seebeck voltage of miniature thermocouples used in differential mode on a Peltier module causing condensation from the ambient air. This sensor uses the sensitivity of alloys V2VI3 containing [Bi, Te, Sb, Se], 400‐440μV.K^–1. Experimental measurements have been performed in a climatic chamber at constant temperature. The time variation of the differential Seebeck voltage with relative humidities H_R varying from 10 to 90 per cent makes it possible to identify with precision the point of water evaporation. For each value of the relative humidity, it is directly a function of the condensate mass. The integration of these curves over time makes it possible to calculate the energy of vaporisation and the condensate mass.

The purpose of this study is to provide a practical guide and checklist for newcomers to autoethnography.

The approach is grounded in autoethnographic methodology, functioning as a comprehensive teaching resource.

When used as a learning resource, this study will enhance the work of beginning autoethnographers.

As an arts and humanities and social science-based research approach, autoethnography is a vital, creative methodology in advancing social justice in mental health.

This study, written by an experienced teacher, mentor and supervisor of the approach with an international reputation, is original in its provision of a comprehensive teaching resource in article form to assist the development of beginning autoethnographers.

Currently, digital technology has been proposed as a new archetype for developing an effective traceability system in the perishable food supply chain (FSC). Implementation of such a system needs significant investment and the burden lies with the members of the supply chain. The purpose of this paper is to examine the impact on the profit of the supply chain members due to the implementation of an effective traceability system with such a large investment. The study also tries to explore the impact of the implementation of such a system by coordination among the members through a cost-sharing mechanism.

A two-level supply chain that comprises a supplier and retailer is analyzed using a game-theoretic approach. The mathematical models are developed considering the scenario for an individual, centralized and both members invest using a cost-sharing mechanism. For each of the models, the impact of product selling price, information sensing price and quality improvement level on profit is analyzed through numerical analysis.

The study reveals that consumer involvement can be a strong motivation for the supply chain members to initiate investment in the traceability system. Further, from an investment perspective cost-sharing model is beneficial compared to the individual investment-bearing model. This mechanism can coordinate as well as benefit the FSC members. However, the model is less beneficial to the centralized model from profit and quality improvement levels.

Food wastage can be less from supplier and retailer perspectives. Moreover, consumers can purchase food items only after verifying their shipping conditions. Consequently the food safety scandals can be reduced remarkably.

Digital technology adoption in the perishable FSC is still considered emerging. The present study helps organizations to implement a traceability system in the perishable FSC through consumer involvement and a cost-sharing mechanism.

Pressure‐sensor miniaturization requires high‐density packaging. This means that designers are constantly faced with all kinds of challenging, and sometimes impossible, requirements. In this paper we will present three examples with specific technologies and aspects of miniaturization and packaging. The first example is a pressure switch, the second a pressure sensor and the third a smart pressure sensor.

Adopting lean principles can unleash several opportunities for firms seeking to increase the efficiency and effectiveness of their product development (PD) process. This study aims to investigate the implementation paths of lean tools in the innovation process of small and medium-sized enterprises (SMEs).

A set of 47 lean tools are identified from the literature and ascribed to the five lean thinking principles, i.e. Value, Map, Flow, Pull and Perfection. Their practical adoption – in terms of “when” and “how” – is then explored in a multiple case study of three SMEs in the manufacturing industry.

SMEs adopt multiple lean tools in different phases of their innovation process. They are still at the beginning of the holistic adoption of lean PD, but some core lean tools, such as A3 reports and visual management, are adopted systematically. Results reveal that specific sets of lean tools and supporting principles are more valuable in certain phases of SMEs innovation process. Specifically, the lean tools concerning the principle of Value and Map can enable the phases of Innovation inputs, Concept development and Solution implementation; the ones ascribed to Flow and Pull the phases of Concept development, Testing and experimentation, and Solution implementation; the Perfection tools to the final phases of Testing and experimentation, Solution implementation and Market introduction.

Results provide a reference for SMEs already adopting lean tools in their production process to be extended to the PD process, especially when the delivery of new products is pivotal. Innovative SMEs could evaluate the introduction of specific lean tools in one or more definite phases of their PD process.

The study contributes to the literature on the complementarity between lean and innovation by studying the context of SMEs with a process perspective, thus unveiling the potential paths of a widespread application of lean innovation in SMEs.

The food supply chain (FSC) challenges coupled with global disruptions, such as the recent coronavirus disease 2019 (COVID-19) pandemic outbreak, exacerbate its vulnerability. The Internet of things (IoT) is one of the disruptive technologies being adopted in food supply chain management (FSCM). This study aims to address the challenges of IoT adoption in the FSC by systematically analyzing the prior pertinent literature.

A structured literature review was used to collate a list of peer-reviewed and relevant publications. A total of 72 out of 210 articles were selected for the final evaluation.

The literature review findings suggest five themes: technical, financial, social, operational, educational and governmental related challenges. A total of 15 challenges were devised from the review related literature of IoT adoption. The study concludes with future research recommendations for scholars and practical implications for practitioners.

While this study focuses on the overall FSC, further research should address other domains in the FSC such as cold supply chain, agriculture and perishable food to gain a better contextual understanding of the specific case.

The topic of IoT adoption in the FSCM is still considered emerging. Therefore, the present work contributes to the limited studies and documentation on the level of IoT implementation in the FSCM. This study should help organizations to assimilate how to adopt and manage the IoT application by addressing the factors and challenges presented in this research.

The paper aims to analyse the contextual relationship and dependency amongst enablers for lean manufacturing implementation in Bulgarian small and medium-sized enterprises (SMEs).

In this study, the interpretive structural modelling (ISM) technique was used to develop a hierarchical structural model for enablers. Also, the interpretive ranking process (IRP) was used to analyse and rank enablers with reference to performance variables. For the ISM approach, a structural self- integration matrix was developed with the help of experts’ suggestions and opinions. Cross-impact matrix multiplication applied to classification (MICMAC) analysis was used to analyse the relationship amongst enablers. A total of nine experts were chosen for collecting the primary data in which seven experts belong to the industry and two experts were academicians. The dominant relationship amongst the enablers was analysed through IRP modelling.

A total of 11 enablers were identified for the purpose of this study. The model shows that “leadership and commitment by management”, “human resource management”, “customer relation management”, “supplier relation management” and “information technology system” are the most significant enablers for lean implementation in Bulgarian SMEs as these are positioned at the bottom levels in ISM model. MICMAC analysis shows that five enablers fall in the independent factor, two enablers in linkage factor and four enablers in the dependant factor while there is no enabler in the autonomous factor. ISM and IRP models show that “continuous improvement” is an essential enabler for the successful implementation of lean in Bulgarian SMEs. This study also helps to explain the comparative analysis of ISM and IRP, which indicates that IRP is a more robust modelling approach than ISM, as it incorporates the relationship of enablers with performance variables.

ISM and IRP modelling approaches are based solely on expert opinions and responses. This limitation can be overcome with the help of empirical study.

This study supports the professionals/experts to prioritise and manage enablers at strategic and tactical levels while implementing lean manufacturing practices in Bulgarian SMEs. The models developed in the study will be helpful for practitioners to understand and analyse the interdependence of enablers for lean manufacturing implementation.

This study helps to identify and prioritise enablers that affect lean manufacturing adoption using ISM and IRP approaches. Literature shows that numerous authors have used the ISM approach but the use of IRP approach is limited. The models were developed in the study, totally dependent on data collected from the experts to ensure their real-life validity.

This paper aims to present a process to generate physics-based trade-off curves (ToCs) to facilitate lean product development processes by enabling two key activities of set-based concurrent engineering (SBCE) process model that are comparing alternative design solutions and narrowing down the design set. The developed process of generating physics-based ToCs has been demonstrated via an industrial case study which is a research project.

The adapted research approach for this paper consists of three phases: a review of the related literature, developing the process of generating physics-based ToCs in the concept of lean product development, implementing the developed process in an industrial case study for validation through the SBCE process model.

Findings of this application showed that physics-based ToC is an effective tool to enable SBCE activities, as well as to save time and provide the required knowledge environment for the designers to support their decision-making.

Authors expect that this paper will guide companies, which are implementing SBCE processes throughout their lean product development journey. Physics-based ToCs will facilitate accurate decision-making in comparing and narrowing down the design-set through the provision of the right knowledge environment.

SBCE is a useful approach to develop a new product. It is essential to provide the right knowledge environment in a quick and visual manner which has been addressed by demonstrating physics knowledge in ToCs. Therefore, a systematic process has been developed and presented in this paper. The research found that physics-based ToCs could help to identify different physics characteristics of the product in the form of design parameters and visualise in a single graph for all stakeholders to understand without a need for an extensive engineering background and for designers to make a decision faster.