Search results

The purpose of this paper is to examine the mechanical characteristics and optimization of wear parameters of hybrid (TiO₂ + Y₂O₃) nanoparticles with Al matrix using squeeze casting technique.

The hybrid aluminium matrix nanocomposites (HAMNCs) were fabricated with varying concentrations of titanium oxide (TiO₂) and yttrium oxide (Y₂O₃), from 2.5 to 10 Wt.% in 2.5 Wt.% increments. Dry sliding wear test variables were optimized using the Taguchi method.

The introduction of hybrid nanoparticles in the aluminium (Al) matrix was evenly distributed in contrast to the base matrix. HAMNC6 (5 Wt.% TiO₂ + 5 Wt.% Y₂O₃) reported the maximum enhancement in mechanical properties (tensile strength, flexural strength, impact strength and density) and decrease in porosity% and elongation% among other HAMNCs. The results showed that the optimal combination of parameters to achieve the lowest wear rate was A3B3C1, or 15 N load, 1.5 m/s sliding velocity and 200 m sliding distance. The sliding distance showed the greatest effect on the dry sliding wear rate of HAMNC6 followed by applied load and sliding velocity. The fractured surfaces of the tensile sample showed traces of cracking as well as substantial craters with fine dimples and the wear worn surfaces were caused by abrasion, cracks and delamination of HAMNC6.

Squeeze-cast Al-reinforced hybrid (TiO₂+Y₂O₃) nanoparticles have been investigated for their impact on mechanical properties and optimization of wear parameters.

Construction safety is a crucial aspect that has far-reaching impacts on economic development. But safety monitoring is often reliant on labor-based observations, which can be prone to errors and result in numerous fatalities annually. This study aims to address this issue by proposing a cloud-building information modeling (BIM)-based framework to provide real-time safety monitoring on construction sites to enhance safety practices and reduce fatalities.

This system integrates an automated safety tracking mobile app to detect hazardous locations on construction sites, a cloud-based BIM system for visualization of worker tracking on a virtual construction site and a Web interface to visualize and monitor site safety.

The study’s results indicate that implementing a comprehensive automated safety monitoring approach is feasible and suitable for general indoor construction site environments. Furthermore, the assessment of an advanced safety monitoring system has been successfully implemented, indicating its potential effectiveness in enhancing safety practices in construction sites.

By using this system, the construction industry can prevent accidents and fatalities, promote the adoption of new technologies and methods with minimal effort and cost and improve safety outcomes and productivity. This system can reduce workers’ compensation claims, insurance costs and legal penalties, benefiting all stakeholders involved.

To the best of the authors’ knowledge, this study represents the first attempt in Bangladesh to develop a mobile app-based technological solution aimed at reforming construction safety culture by using BIM technology. This has the potential to change the construction sector’s attitude toward accepting new technologies and cultures through its convenient choice of equipment.

This paper aims to examine the causation linking financial technology to economic growth in the East African Community states from 1997 to 2019.

Autoregressive distributed lag is used. Gross domestic product per capita proxies economic growth, automated teller machines, point of sale, debit card ownership and mobile banking measure financial technology.

The results unveil a significant relationship between financial technology and economic growth. The findings show bidirectional causality between automated teller machine and economic growth, with unidirectional causation from economic growth to point of sales and internet banking, mobile banking and government effectiveness to economic growth. The error correction term is negatively significant, demonstrating a long-term convergence between Fintech measures and economic growth.

The governments should effectively enact and implement policies that protect investments in financial technologies to boost economic growth in the East African Community countries. The government should reduce taxes on financial technology equipment and related services. The use of automated teller machine, debit card ownership and internet banking should be encouraged through cashless transactions. Financial institutions should adopt cashless operation policies to encourage the use of financial technologies.

Research results on the bond between financial technology and economic growth are not conclusive. These studies demonstrate that technological innovations are double edged-swords, with both positive and negative sides. The results are conflicting; some reveal positive relationships, while others show negative links. Hence, research is required to fill the lacuna.

Circular economy firms, unlike those in a linear economy, encounter significant challenges due to the nature of nonstandardized products, such as asymmetric information on product specifications and highly dispersed supply and demand. Consequently, achieving large-scale operations becomes inherently difficult for them. However, when digital platform-based circular firms adopt diversified business models, their value creation has the potential to achieve significant scale. This study aims to answer “How do digital platform-based circular firms scale up value creation through business model diversification?”.

The authors use a qualitative case study design with a longitudinal (2011–2023) analysis of the various business models developed by ATRenew, a leading firm in the Chinese preowned electronics industry.

The authors find that the recycling business model can act as a “cornerstone” business model for a circular firm to integrate the business model portfolio by leveraging the most synergies (or complementarities) with other business models. Besides, digital platform-based circular firms can effectively scale up value creation by leveraging capability complementary on the supply side, through establishing industrial infrastructure shared with the platform ecosystem; and by leveraging customer complementary on the demand side, through activating the dual role played by platform users as suppliers and consumers.

The authors contribute to the circular business models literature with three mechanisms to scale up circular value creation through business model diversification and advance a set of propositions to be tested in future research. This also has important practical implications for circular economy platform businesses.

Bales of cotton run through the gins and textile mill instruments, stick to them and make it cumbersome for the ginning mill workers. This is so because more time and money have to be invested in cleaning these instruments. The stickiness of cotton causes health hazards to the workers, decreases the yarn quality and economic loss to the textile industry. The effect of cotton stickiness on textile ginning, various methods for cotton stickiness detection and the steps for reduction are discussed.

The different methods that are available for detecting and measuring cotton stickiness are described. The sugars that cause stickiness are either of plant origin (physiological sugars) or from the feeding insects (entomological origin). The methods for stickiness detection and reduction are discussed under physical, chemical and biological categories.

This review suggests possible ways to mitigate cotton stickiness.

One of the major issues of the textile industry is honeydew-contaminated cotton stickiness. However, there are few papers on detection methods for analyzing honeydew cotton stickiness along with the approaches to reduce stickiness. This paper summarizes different methods along with a study for detection as well as reduction of cotton stickiness.

The heterogeneous character of Industry 4.0 opens opportunities for studies to understand the difficulties and challenges found in the transformation process of manufacturers. This article aims to present a critical analysis of the modernization process of an Industry 3.0 automated cell into a fully autonomous cell of Industry 4.0. The objective is to elucidate the difficulties found in this transition process and the possible ways to overcome the challenges, focusing on the management perspective.

For this, the needed steps for the technology transition were defined and the main I4.0 enabling technologies were applied, such as the application of machine learning algorithms to control quality parameters in milling.

The main challenges found were related to the obsolescence of the equipment present in the cell, challenges in data integration and communication protocols, in addition to the training of people who work actively in the project team. The difficulties faced were discussed based on similar studies in the literature and possible solutions for each challenge.

This understanding of possible barriers in the modernization process, and the step-by-step defined for this transition, can be important references for professionals working in manufacturing industries and researchers who aim to deepen their studies in this important and disruptive stage of world industrialization.

Computer vision and deep learning (DL) methods have been investigated for personal protective equipment (PPE) monitoring and detection for construction workers’ safety. However, it is still challenging to implement automated safety monitoring methods in near real time or in a time-efficient manner in real construction practices. Therefore, this study developed a novel solution to enhance the time efficiency to achieve near-real-time safety glove detection and meanwhile preserve data privacy.

The developed method comprises two primary components: (1) transfer learning methods to detect safety gloves and (2) edge computing to improve time efficiency and data privacy. To compare the developed edge computing-based method with the currently widely used cloud computing-based methods, a comprehensive comparative analysis was conducted from both the implementation and theory perspectives, providing insights into the developed approach’s performance.

Three DL models achieved mean average precision (mAP) scores ranging from 74.92% to 84.31% for safety glove detection. The other two methods by combining object detection and classification achieved mAP as 89.91% for hand detection and 100% for glove classification. From both implementation and theory perspectives, the edge computing-based method detected gloves faster than the cloud computing-based method. The edge computing-based method achieved a detection latency of 36%–68% shorter than the cloud computing-based method in the implementation perspective. The findings highlight edge computing’s potential for near-real-time detection with improved data privacy.

This study implemented and evaluated DL-based safety monitoring methods on different computing infrastructures to investigate their time efficiency. This study contributes to existing knowledge by demonstrating how edge computing can be used with DL models (without sacrificing their performance) to improve PPE-glove monitoring in a time-efficient manner as well as maintain data privacy.

To reduce the difficulty of the sewing process and promote the automation process of fabric sewing, a soft finger-assisted feeding method is proposed to investigate the effect of sewing process parameters on the quality of automatic sewing.

Taking cotton woven fabrics as an example, the causes of sewing deviation are firstly investigated from three aspects: fabric properties, sewing speed and sewing edge position. By simulating the sewing action of human hands, the method of reducing sewing deviation by using soft fingers to press and feed the fabric is proposed. Then, four sewing process factors, namely, robot arm end pressure, sewing machine speed, sewing needle gauge and stitch density, were selected, and three levels were set for each factor to design orthogonal sewing experiments. The sewing deviation of 1# sample under different sewing processes was measured, and the optimal parameter matching for automatic sewing of this specimen was derived.

The findings demonstrate that, while sewing cloth automatically, the sewing deviation is significantly influenced by the robotic arm's end pressure, sewing speed, and stitch density, whereas the sewing deviation is not significantly impacted by the needle number.

The findings offer fundamental information for the development of an automated sewing procedure using soft fingers, which has theoretical and real-world application value to speed up the intelligent modernization and transformation of the apparel industry.

This paper aims to focus on identifying key health-care issues amenable to digital twin (DT) approach. It starts with a description of the concept and enabling technologies of a DT and then discusses potential applications of DT solutions in healthcare facilities management (FM) using four different scenarios. The scenario planning focused on monitoring and controlling the heating, ventilation, and air-conditioning system in real-time; monitoring indoor air quality (IAQ) to monitor the performance of medical equipment; monitoring and tracking pulsed light for SARS-Cov-2; and monitoring the performance of medical equipment affected by radio frequency interference (RFI).

The importance of a healthcare facility, its systems and equipment necessitates an effective FM practice. However, the FM practices adopted have several areas for improvement, including the lack of effective real-time updates on performance status, asset tracking, bi-directional coordination of changes in the physical facilities and the computational resources that support and monitor them. Consequently, there is a need for more intelligent and holistic FM systems. We propose a DT which possesses the key features, such as real-time updates and bi-directional coordination, which can address the shortcomings in healthcare FM. DT represents a virtual model of a physical component and replicates the physical data and behavior in all instances. The replication is attained using sensors to obtain data from the physical component and replicating the physical component's behavior through data analysis and simulation. This paper focused on identifying key healthcare issues amenable to DT approach. It starts with a description of the concept and enabling technologies of a DT and then discusses potential applications of DT solutions in healthcare FM using four different scenarios.

The scenarios were validated by industry experts and concluded that the scenarios offer significant potential benefits for the deployment of DT in healthcare FM such as monitoring facilities’ performance in real-time and improving visualization by integrating the 3D model.

In addition to inadequate literature addressing healthcare FM, the study was also limited to one of the healthcare facilities of a large public university, and the scope of the study was limited to IAQ including pressure, relative humidity, carbon dioxide and temperature. Additionally, the study showed the potential benefits of DT application in healthcare FM using various scenarios that DT experts validated.

The study shows the practical implication using the various validated scenarios and identified enabling technologies. The combination and implementation of those mentioned above would create a system that can effectively help manage facilities and improve facilities' performances.

The only identifiable social solution is that the proposed system in this study can manually be overridden to prevent absolute autonomous control of the smart system in cases when needed.

To the best of the authors’ knowledge, this is the only study that has addressed healthcare FM using the DT approach. This research is an excerpt from an ongoing dissertation.

Facility management gained profound importance due to the increasing complexity of different systems and the cost of operation and maintenance. However, due to the increasing complexity of different systems, facility managers may suffer from a lack of information. The purpose of this paper is to propose a new facility management approach that links segmented assets to the vital data required for managing facilities.

Automatic point cloud segmentation is one of the most crucial processes required for modelling building facilities. In this research, laser scanning is used for point cloud acquisition. The research utilises region growing algorithm, colour-based region-growing algorithm and Euclidean cluster algorithm.

A case study is worked out to test the accuracy of the considered point cloud segmentation algorithms utilising metrics precision, recall and F-score. The results indicate that Euclidean cluster extraction and region growing algorithm revealed high accuracy for segmentation.

The research presents a comparative approach for selecting the most appropriate segmentation approach required for accurate modelling. As such, the segmented assets can be linked easily with the data required for facility management.