Search results

Regarding the assembly of the fuselage panel, this paper aims to illustrate a design of pre-assembly tooling of the fuselage panel for the automatic drilling riveting machine. This new prototype of pre-assembly tooling can be used for different types and sizes of fuselage panels. Also, apply to the automated drilling and riveting machine of the fuselage panels.

Based on the different structures of the fuselage panel, the position of the preassembly tooling components, location of the clamp and position of the fuselage panel are determined. After that, the overall structure of the preassembly tooling is designed, including the movable frame and the cardboard. The cardboard positioning module and the clamping module formulate a detailed design scheme of preassembly tooling for the fuselage panel. The structure of the pre-assembled tooling is optimized by static analysis. The result of the overall design is optimized by using MATLAB and CATIA-V5 software, and the results meet the condition of the design requirements.

The traditional assembly process of the fuselage is to install the fuselage panel on the preassembly tooling for positioning the hole and then install it on the automated drilling and riveting tooling for secondary tooling. Secondary tooling can consume assembly errors of the fuselage panel. The new prototype of flexible tooling design for the fuselage panel not only avoids the secondary tooling error of the fuselage panel but also meets the preassembly of different types of fuselage panels.

The further development of the flexible tooling design of the fuselage panel is to reduce the error of sliding tooling due to friction of the sliding components. Because if the assembly cycle is increased, the sliding parts will lose material due to corrosion. As a result, the repeated friction force is the root cause of the positioning error of sliding parts. Therefore, it is necessary to engage less corrosive material. Also, the lubricant may be used to reduce the corrosion in minimizing the positioning error of the sliding tool components. In addition, it is important to calculate the number of assembly cycles for efficient fuselage panel assembly.

According to the structure and assembly process characteristics of the fuselage panel, the fuselage panel preassembly tooling can optimize the assembly process of the fuselage panel and have certain practical application values.

The purpose of this paper is to develop digital flexible pre-assembly tooling system for fuselage panels.

First, the paper analyzes the technological characteristics of fuselage panels and then determines the pre-assembly object. Second, the pre-assembly positioning method and assembly process are researched. Third, the panel components pre-assembly flexible tooling scheme is constructed. Finally, the pre-assembly flexible tooling system is designed and manufactured.

This study shows the novel solution results in significantly smaller tooling dimensions, while providing greater stability. Digital flexible assembly is an effective way to reduce floor space, reduce delivery and production lead times and improve quality.

The tooling designed in this case is actually used in industrial application. The flexible tooling can realize the pre-assembly for a number of fuselage panels, which is shown as an example in this paper.

The paper suggests the fuselage panel pre-assembly process based on the thought including pre-assembly, the automatic drilling and riveting and jointing, and constructs a flexible tooling system for aircraft fuselage panel component pre-assembly.

Fuselage structures are subjected to combinations of axial, bending, shear and differential pressure loads. The validation of advanced metallic and composite fuselage designs against such loads is based on the full-scale testing of the fuselage barrel, which, however, is highly demanding from a time and cost viewpoint. This paper aims to assist in scaling-down the experimentation to the stiffened panel level which presents the opportunity to validate state-of-the-art designs at higher rates than previously attainable.

Development of a methodology to successfully design tests at the stiffened panel level and realize them using advanced, complex and adaptable test-rigs that are capable of introducing independently a set of distinct load types (e.g. internal overpressure, tension, shear) while applying appropriate boundary conditions at the edges of the stiffened panel.

A baseline test-rig configuration was developed after extensive parametric modelling studies at the stiffened panel level. The realization of the loading and boundary conditions on the test-rig was facilitated through innovative supporting and loading system set-ups.

The proposed test bench is novel and compared to the conventional counterparts more viable from an economic and manufacturing point of view. It leads to panel responses, which are as close as possible to those of the fuselage barrel in-flight and can be used for the execution of static or fatigue tests on metallic and thermoplastic curved integrally stiffened full-scale panels, representative of a business jet fuselage.

In aircraft wing–fuselage assembly, the distributed multi-point support layout of positioners causes fuselage to deform under gravity load, leading to assembly difficulty and assembly stress. This paper aims to propose a hybrid force position control method to balance aerodynamic shape accuracy and deformation of assembly area, thereby correcting assembly deformation and reducing assembly stress.

Force and position control axes of positioners are selected based on screw theory and ellipsoid method. The position-control axes follow the posture trajectory to align the fuselage posture. To exert force on the fuselage and correct the deformations, the force-control axes follow the contact force derived by using orthogonal experiments and partial least squares regression (PLSR). Finite element simulation and one-dimension deformation correction experiment are conducted to verify the validity of this method.

Simulation results indicate that hybrid force position control method can correct assembly deformation and improve the wing–fuselage assembly quality significantly. Experiment on specimen verifies the effect of this method indirectly.

The proposed method gives a solution to solve the deformation problem during aircraft wing-fuselage assembly, thereby reducing assembly stress and improving assembly quality.

The deformation of a large fuselage panel is unavoidable due to its weak-stiffness and low-rigidity. Sometimes, the assembly accuracy of the panel is out of tolerance. The purpose of this paper is to propose a method to predict and correct the assembly deformation of a large fuselage panel during digital assembly by using a finite element (FE) analysis and partial least squares regression (PLSR) method.

A FE model is proposed to optimize the layout of load-transmitting devices to reduce panel deformation after the process of hoisting and supporting. Furthermore, another FE model is established to investigate the deformation behavior of the panel. By orthogonal simulations, the position error data of measurement points representing the precision of the panel are obtained. Then, a mathematical model of the relationship between the position errors of measurement points on the panel and the displacements of numerical control positioners is developed based on the PLSR method.

The case study shows that the model has a high level of computing accuracy and that the proposed method is an efficient way to correct the panel deformation in digital assembly.

The results of this study will enhance the understanding of the deformation behavior of a panel in aircraft digital assembly and help to improve the assembly precision systematically and efficiently.

This paper aims to present a modeling and analysis approach for multi-station aircraft assembly to predict assembly variation. The variation accumulated in the assembly process will influence the dimensional accuracy and fatigue life of airframes. However, in digital large aircraft assembly, variation propagation analysis and modeling are still unresolved issues.

Based on an elastic structure model and variation model of multistage assembly in one station, the propagation of key characteristics, assembly reference and measurement errors are introduced. Moreover, the reposition and posture coordination are considered as major aspects. The reposition of assembly objects in a different assembly station is described using transformation and blocking of coefficient matrix in finite element equation. The posture coordination of the objects is described using homogeneous matrix multiplication. Then, the variation propagation model and analysis of large aircraft assembly are established using a discrete system diagram.

This modeling and analysis approach for multi-station aircraft assembly reveals the basic rule of variation propagation between adjacent assembly stations and can be used to predict assembly variation or potential dimension problems at a preliminary assembly phase.

The modeling and analysis approaches have been used in a transport aircraft project, and the calculated results were shown to be a good prediction of variation in the actual assembly.

Although certain simplifications and assumptions have been imposed, the proposed method provides a better understanding of the multi-station assembly process and creates an analytical foundation for further work on variation control and tolerance optimization.

A novel development process aims at finding solutions for lightweight stiffened shell structures and their efficient production. To respect the strong interdependency of structural design and production planning, particularly observed for composite structures, it is of high interest to start considering production effects in early development phases. This integrated approach requires an integrated representation of structure and production. The purpose of this study is to investigate the scope of relevant data and to find a structure for its representation.

The development task is analyzed and a system of so-called solution dimensions is presented, which covers all important aspects of stiffened shell structures and their production. An integrated product data model is developed to cover all of the solution dimensions.

The product data model consists of five coherent partial models. It is explained how these models are defined and how they are connected to each other. An academic example of an aircraft fuselage panel is used to demonstrate the definition process. It is shown how even complex structural concepts are defined systematically.

It is explained how this integrated product data model is used in a software project for the development of aircraft fuselage structures.

The presented approach for the definition and representation of stiffened shell structures enables the developer, e.g. of aircraft fuselage, to respect the crucial criterion of manufacturability from early development phases on. Further, new design approaches, e.g. as inspired by topology optimization, can be considered.

This paper aims to describe the development and testing of a system for the automated assembly of aircraft fuselage panels.

The system described in this paper uses a low‐cost industrial robot and laser stripe sensor to assemble stringers on to a fuselage panel prior to riveting. The method uses a combination of measurement and best fit placement algorithms to optimally locate parts relative to existing features.

The paper demonstrates that with a combination of metrology and mathematical processing standard industrial robots can be used to assemble aero‐structure subassemblies. The paper also demonstrates that the system can work within the tolerances required within the aerospace industry.

The paper introduces techniques for compensating for the inherent distortion that occurs in airframe components during manufacture. This is an enabling technology that will significantly increase the number of possible applications for industrial robots in the assembly of aero‐structures.

The riveting process is a metal forming process involving complex elastic-plastic deformation, which will induce a compressive residual stress field and cause local distortions in the connecting areas. Regarding to the aircraft panel assemblies with plenty of rivets, the global deformation is inevitable and undesired, leading difficulties to downstream assembly processes. This paper aims to present a new method for the local distortion calculation and the global deformation prediction of sheet panel assemblies during the automated riveting process.

In this paper, a simplified algebraic study is presented to analyze the local distortion of single countersunk rivet joint with the consideration of the barrel-like shape of the driven head and the through-thickness variations along the rivet shank. Then, an equivalent rivet unit is proposed based on the result of the algebraic study and embedded into the global-level model for the prediction of the overall distortions of riveted panels.

The algebraic study is able to reach a more precise contour of the deformed rivet than the traditional assumption of cylindrical deformations and rapidly determine the equivalent coefficients of the riveting unit. The result also shows an industrial acceptable accuracy of the prediction for the global deformations of the double-layered panel assemblies widely used in the aircraft panel structures.

A new local-global method for predicting the deformations of the riveted panel assembly based on the algebraic study of the local distortions is proposed to help the engineers in the early design stages or in the assembly process planning stage.

The purpose of this paper is to use the redundancy of a new hybrid automatic fastening system (HAFS) for aircraft assembly in the best way.

First, the kinematic model of HAFS is divided into three sub-models, which are the upper/lower tool and parallel robot. With the geometric coordination relationship, a comprehensive kinematic model of the HAFS is built by mathematically assembling the sub-models based on the DH method. Then, a novel master-slave decoupling strategy for inverse kinematics solution is proposed. With the combination of the minimum energy consumption and the comfortable configuration, a multi-objective redundancy resolution method is developed to optimize the fastening configuration of the HAFS, which keep the HAFS away from the joint-limits and collision avoiding in the aircraft panel assembly process.

An efficient multi-objective posture optimization algorithm to use the redundancy in the best way is obtained. Simulation and an experiment are used to demonstrate the correctness of the proposed method. Moreover, the position and orientation errors of the drilling holes are within 0.222 mm and 0.356°, which are accurate enough for the automatic fastening in aircraft manufacturing.

This method has been used in the HAFS control system, and the practical results show the aircraft components can be fastened automatically through this method with high efficiency and high quality.

This paper proposes a comprehensive kinematic model and a novel decoupling strategy for inverse kinematic solution of the HAFS, which provides a reference to utilize the redundancy in the best way for a hybrid machine with redundant function.