Search results
1 – 10 of over 3000Arne Seitz, Julian Bijewitz, Sascha Kaiser and Guido Wortmann
The purpose of this paper is the multi-disciplinary conceptual investigation of a propulsive fuselage (PF) aircraft layout allowing for new performance synergies through closely…
Abstract
Purpose
The purpose of this paper is the multi-disciplinary conceptual investigation of a propulsive fuselage (PF) aircraft layout allowing for new performance synergies through closely coupled propulsion/airframe integration. The discussed aircraft layout facilitates the ingestion of the fuselage boundary layer and the utilization of wake filling, thus eliminating a significant share of fuselage drag.
Design/methodology/approach
Based on consistent book-keeping standards for conventionally installed and highly integrated propulsion systems, key aspects of conceptualisation regarding airframe and propulsion system are presented. As a result of this, a PF aircraft configuration is proposed featuring a fuselage fan power plant in conjunction with two under-wing podded power plants. Parametric models for integrated aircraft and propulsion system sizing and performance analysis are discussed that are suitable for the consistent mapping of the characteristics intrinsic to a PF layout. In an initial benchmarking exercise, the vehicular efficiency potentials of the previously identified PF configuration are evaluated against an advanced conventional reference aircraft.
Findings
During benchmarking, it was found that a best and balanced design for the proposed PF aircraft layout yields an increase in vehicular efficiency of approximately 10 per cent compared to the advanced conventional reference aircraft.
Practical implications
The paper gives the reader an idea for the efficiency potentials achievable through a PF aircraft configuration, as well as guidelines for aircraft sizing and integrational aspects. It may serve as a basis for advanced studies in the future.
Originality/value
The conceptual investigation of the PF concept idea, contributes to establishing the initial technical feasibility of this novel approach to synergistic propulsion system integration. The methods presented in this paper allow for the multi-disciplinary conceptual design sizing of a PF aircraft.
Details
Keywords
Xinjiang Wang, Ziqiang Liu, Li Guo, Jinan Lv and Chen Ji
The purpose of this paper is to introduce a novel method to study the flutter coupling mechanism of the twin-fuselage aircraft, which is becoming a popular transportation vehicle…
Abstract
Purpose
The purpose of this paper is to introduce a novel method to study the flutter coupling mechanism of the twin-fuselage aircraft, which is becoming a popular transportation vehicle recently.
Design/methodology/approach
A new method of flutter mode indicator is proposed based on the principle of work and power, which is realized through energy accumulation of generalized force work on generalized coordinates, based on which flutter coupling mechanism of the twin-fuselage aircraft is studied using ground vibration test and computational fluid dynamics/computational solid dynamics method.
Findings
Verification of the proposed flutter mode indicator is provided, by which the flutter mechanism of the twin fuselage is found as the horizontal tail’s torsion coupled with its bending effect and the “frequency drifting” phenomenon of twin-fuselage aircraft is explained logically, highlighting the proposed method in this paper.
Originality/value
This paper proposed a new method of flutter mode indicator, which has advantages in flutter modes indexes reliability, clear physical meaning and results normalization. This study found the flutter coupling mechanism of twin-fuselage aircraft, which has important guiding significance to the development of twin-fuselage aircraft.
Details
Keywords
Julian Bijewitz, Arne Seitz, Askin T. Isikveren and Mirko Hornung
Motivated by the potential of gaining noticeable improvements in vehicular efficiency, this paper aims to investigate the benefits attainable from introducing a more synergistic…
Abstract
Purpose
Motivated by the potential of gaining noticeable improvements in vehicular efficiency, this paper aims to investigate the benefits attainable from introducing a more synergistic propulsion/airframe integration. In previous work, the concept of a boundary layer ingesting propulsor encircling the aft section of an axisymmetric fuselage was identified to be particularly promising for the realisation of aircraft wake filling, and hence, a significant reduction of the propulsive power required.
Design/methodology/approach
After reviewing the theoretical principles of the propulsive fuselage concept, a book-keeping and model matching procedure is introduced, which is subsequently used to incorporate the numerically computed aerodynamic characteristics of a propulsive fuselage aircraft configuration into a propulsion system (PPS) sizing and performance model. As part of this, design heuristics for important characteristics intrinsic to propulsive fuselage power plants are derived. Thereafter, parametric study results of the PPS are discussed, and the obtained characteristics are compared to those of a conventionally installed power plant. Finally, the impact of the investigated PPS on the integrated performance of a propulsive fuselage aircraft concept is studied, and the results are compared and contrasted to previously conducted analyses based on semi-empirical characteristics.
Findings
It was found that the aircraft-level benefit originally predicted based on semi-empirical methods could be confirmed using the numerically derived PPS design heuristics, specifically an improvement in vehicular efficiency of 10.4 per cent over an advanced conventional reference aircraft.
Practical implications
The approach presented in the paper may serve as a guideline when incorporating the results of high-fidelity aerodynamic methods into a PPS sizing and performance model suitable for aircraft-integrated assessment of a propulsive fuselage concept. The vehicular efficiency potentials offered through the synergistic PPS integration approach are highlighted.
Originality/value
The paper contributes to a deeper understanding of the characteristics of a boundary layer ingesting fuselage fan (FF) power plant relative to a conventionally installed PPS. In addition, a set of PPS design correlations are presented allowing for the integrated sizing of a FF power plant.
Details
Keywords
Dianzi Liu, Chuanwei Zhang, Z. Wan and Z. Du
In recent years, innovative aircraft designs have been investigated by researchers to address the environmental and economic issues for the purpose of green aviation. To keep air…
Abstract
Purpose
In recent years, innovative aircraft designs have been investigated by researchers to address the environmental and economic issues for the purpose of green aviation. To keep air transport competitive and safe, it is necessary to maximize design efficiencies of the aircrafts in terms of weight and cost. The purpose of this paper is to focus on the research which has led to the development of a novel lattice fuselage design of a forward-swept wing aircraft in the conceptual phase by topology optimization technique.
Design/methodology/approach
In this paper, the fuselage structure is modelled with two different types of elements – 1D beam and 2D shell – for the validation purpose. Then, the finite element analysis coupled with topology optimization is performed to determine the structural layouts indicating the efficient distributed reinforcements. Following that, the optimal fuselage designs are obtained by comparison of the results of 1D and 2D models.
Findings
The topological results reveal the need for horizontal stiffeners to be concentrated near the upper and lower extremities of the fuselage cross section and a lattice pattern of criss-cross stiffeners should be well-placed along the sides of the fuselage and near the regions of window locations. The slight influence of windows on the optimal reinforcement layout is observed. To form clear criss-cross stiffeners, modelling the fuselage with 1D beam elements is suggested, whereas the less computational time is required for the optimization of the fuselage modelled using 2D shell elements.
Originality/value
The authors propose a novel lattice fuselage design in use of topology optimization technique as a powerful design tool. Two types of structural elements are examined to obtain the clear reinforcement detailing, which is also in agreement with the design of the DLR (German Aerospace Center) demonstrator. The optimal lattice layout of the stiffeners is distinctive to the conventional semi-monocoque fuselage design and this definitely provides valuable insights into the more efficient utilization of composite materials for novel aircraft designs.
Details
Keywords
EACH September the eyes of the aeronautical World turn towards the S.B.A.C. Air Display and Exhibition with interest unequalled by any other event. It is fitting that the Display…
Abstract
EACH September the eyes of the aeronautical World turn towards the S.B.A.C. Air Display and Exhibition with interest unequalled by any other event. It is fitting that the Display is now held each year at the airfield of the Royal Aircraft Establishment, one of the world's most prominent aeronautical research centres. This interest becomes increasingly keen too, as the preview day comes closer, because new prototypes of unorthodox designs often appear a short time before the Show to illustrate the results of years of careful planning, development and research of the particular company. These designs often mould the path of progress for smaller countries without the economic resources to forge the way ahead alone. Most British citizens are very proud of their country's place in aviation today, both in the military and civil fields. This is understood by most foreigners because it is clear that Britain has won a place in aeronautical development second to none.
Liang Cheng, Qing Wang, Jiangxiong Li and Yinglin Ke
The aim of this paper is to present a new variation modeling method for fuselage structures in digital large aircraft assembly. The variation accumulated in a large aircraft…
Abstract
Purpose
The aim of this paper is to present a new variation modeling method for fuselage structures in digital large aircraft assembly. The variation accumulated in a large aircraft assembly process will influence the dimensional accuracy and fatigue life of airframes. However, in digital large aircraft assembly, variation analysis and modeling are still unresolved issues.
Design/methodology/approach
An elastic structure model based on beam elements is developed, which is an equivalent idealization of the actual complex structure. The stiffness matrix of the structure model is obtained by summing the stiffness matrices of the beam elements. For each typical stage of the aircraft digital assembly process, including positioning, coordinating, joining and releasing, variation models are built using the simplified structure model with respective loads and boundary conditions.
Findings
Using position errors and manufacturing errors as inputs, the variations for every stage of the assembly process can be calculated using the proposed model.
Practical implications
This method has been used in a large fuselage section assembly project, and the calculated results were shown to be a good prediction of variation in the actual assembly.
Originality/value
Although certain assumptions have been imposed, the proposed method provides a better understanding of the assembly process and creates an analytical foundation for further work on variation control and tolerance optimization.
Details
Keywords
João Antônio Dantas de Jesus Ferreira and Ney Rafael Secco
This paper aims to investigate the possibility of lowering the time taken during the aircraft design for unmanned aerial vehicles by using machine learning (ML) for the…
Abstract
Purpose
This paper aims to investigate the possibility of lowering the time taken during the aircraft design for unmanned aerial vehicles by using machine learning (ML) for the configuration selection phase. In this work, a database of unmanned aircraft is compiled and is proposed that decision tree classifiers (DTC) can understand the relations between mission and operational requirements and the resulting aircraft configuration.
Design/methodology/approach
This paper presents a ML-based approach to configuration selection of unmanned aircraft. Multiple DTC are built to predict the overall configuration. The classifiers are trained with a database of 118 unmanned aircraft with 57 characteristics, 47 of which are inputs for the classification problem, and 10 are the desired outputs, such as wing configuration or engine type.
Findings
This paper shows that DTC can be used for the configuration selection of unmanned aircraft with reasonable accuracy, understanding the connections between the different mission requirements and the culminating configuration. The framework is also capable of dealing with incomplete databases, maximizing the available knowledge.
Originality/value
This paper increases the computational usage for the aircraft design while retaining requirements’ traceability and increasing decision awareness.
Details
Keywords
A DSIR Sponsored Research Programme on the Development and Application of the Matrix Force Method and the Digital Computer. This work presents a rational method for the structural…
Abstract
A DSIR Sponsored Research Programme on the Development and Application of the Matrix Force Method and the Digital Computer. This work presents a rational method for the structural analysis of stressed skin fuselages for application in conjunction with the digital computer. The theory is a development of the matrix force method which permits a close integration of the analysis and the programming for a computer operating with a matrix interpretive scheme. The structural geometry covered by the analysis is sufficiently arbitrary to include most cases encountered in practice, and allows for non‐conical taper, double‐cell cross‐sections and doubly connected rings. An attempt has been made to produce a highly standardized procedure requiring as input information only the simplest geometrical and elastic data. An essential feature is the use of the elimination and modification technique subsequent to the main analysis of the regularized structure in which all cutouts have been filled in. Current Summary A critical historical appraisal of previous work in the Western World on fuselage analysis is given in the present issue together with an outline of the ideas underlying the new theory.
Tanja Führer, Christian Willberg, Sebastian Freund and Falk Heinecke
To obtain a good start configuration in the early design phase, simulation tools are used to create a large number of product designs and to evaluate their performance. To reduce…
Abstract
Purpose
To obtain a good start configuration in the early design phase, simulation tools are used to create a large number of product designs and to evaluate their performance. To reduce the effort for the model generation, analysis and evaluation, a design environment for thin-walled lightweight structures (DELiS) with the focus on structural mechanics of aircrafts has been developed.
Design/methodology/approach
The core of DELiS is a parametric model generator, which creates models of thin-walled lightweight structures for the aircraft preliminary design process. It is based on the common parametric aircraft configuration schema (CPACS), which is an abstract aircraft namespace. DELiS facilitates interfaces to several commercial and non-commercial finite element solvers and sizing tools.
Findings
The key principles and the advantages of the DELiS process are illustrated. Also, a convergence study of the finite element model of the wing and the fuselage and the result on the mass after the sizing process are shown. Due to the high flexibility of model generation with different levels of detail and the interface to the exchange database CPACS, DELiS is well suited to study the structural behaviour of different aircraft configurations in a multi-disciplinary design process.
Originality/value
The abstract definition of the object-oriented model allows several dimensions of variability, such as different fidelity levels, for the resulting structural model. Wings and fuselages can be interpreted as finite beam models, to calculate the global dynamic behaviour of a structure, or as finite shell models.
Details