Search results
1 – 10 of 543Guanchen Liu, Dongdong Xu, Zifu Shen, Hongjie Xu and Liang Ding
As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous…
Abstract
Purpose
As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.
Design/methodology/approach
Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.
Findings
In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.
Originality/value
With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.
Details
Keywords
Osama Abdulhameed, Abdurahman Mushabab Al-Ahmari, Wadea Ameen and Syed Hammad Mian
Hybrid manufacturing technologies combining individual processes can be recognized as one of the most cogent developments in recent times. As a result of integrating additive…
Abstract
Purpose
Hybrid manufacturing technologies combining individual processes can be recognized as one of the most cogent developments in recent times. As a result of integrating additive, subtractive and inspection processes within a single system, the relative benefits of each process can be exploited. This collaboration uses the strength of the individual processes, while decreasing the shortcomings and broadening the application areas. Notwithstanding its numerous advantages, the implementation of hybrid technology is typically affected by the limited process planning methods. The process planning methods proficient at effectively using manufacturing sources for hybridization are notably restrictive. Hence, this paper aims to propose a computer-aided process planning system for hybrid additive, subtractive and inspection processes. A dynamic process plan has been developed, wherein an online process control with intelligent and autonomous characteristics, as well as the feedback from the inspection, is utilized.
Design/methodology/approach
In this research, a computer-aided process planning system for hybrid additive, subtractive and inspection process has been proposed. A framework based on the integration of three phases has been designed and implemented. The first phase has been developed for the generation of alternative plans or different scenarios depending on machining parameters, the amount of material to be added and removed in additive and subtractive manufacturing, etc. The primary objective in this phase has been to conduct set-up planning, process selection, process sequencing, selection of machine parameters, etc. The second phase is aimed at the identification of the optimum scenario or plan.
Findings
To accomplish this goal, economic models for additive and subtractive manufacturing were used. The objective of the third phase was to generate a dynamic process plan depending on the inspection feedback. For this purpose, a multi-agent system has been used. The multi-agent system has been used to achieve intelligence and autonomy of different phases.
Practical implications
A case study has been developed to test and validate the proposed algorithm and establish the performance of the proposed system.
Originality/value
The major contribution of this work is the novel dynamic computer-aided process planning system for the hybrid process. This hybrid process is not limited by the shortcomings of the constituent processes in terms of tool accessibility and support volume. It has been established that the hybrid process together with an appropriate computer-aided process plan provides an effective solution to accurately fabricate a variety of complex parts.
Details
Keywords
Zhanghuang Xie, Xiaomei Li, Dian Huang, Andrea Appolloni and Kan Fang
We consider a joint optimization problem of product platform design and scheduling on unrelated additive/subtractive hybrid machines, and seek to find efficient solution…
Abstract
Purpose
We consider a joint optimization problem of product platform design and scheduling on unrelated additive/subtractive hybrid machines, and seek to find efficient solution approaches to solve such problem.
Design/methodology/approach
We propose a mathematical formulation for the problem of simultaneous product platform design and scheduling on unrelated additive/subtractive hybrid machines, and develop a simulated annealing-based hyper-heuristic algorithm with adjustable operator sequence length to solve the problem.
Findings
The simulated annealing-based hyper-heuristic algorithm with adjustable operator sequence length (SAHH-osla) that we proposed can be quite efficient in solving the problem of simultaneous product platform design and scheduling on unrelated additive/subtractive hybrid machines.
Originality/value
To the best of our knowledge, we are one of the first to consider both cost-related and time-related criteria for the problem of simultaneous product platform design and scheduling on unrelated additive/subtractive hybrid machines.
Details
Keywords
Mahyar Khorasani, Ian Gibson, Amir Hossein Ghasemi, Elahe Hadavi and Bernard Rolfe
The purpose of this study is, to compare laser-based additive manufacturing and subtractive methods. Laser-based manufacturing is a widely used, noncontact, advanced manufacturing…
Abstract
Purpose
The purpose of this study is, to compare laser-based additive manufacturing and subtractive methods. Laser-based manufacturing is a widely used, noncontact, advanced manufacturing technique, which can be applied to a very wide range of materials, with particular emphasis on metals. In this paper, the governing principles of both laser-based subtractive of metals (LB-SM) and laser-based powder bed fusion (LB-PBF) of metallic materials are discussed and evaluated in terms of performance and capabilities. Using the principles of both laser-based methods, some new potential hybrid additive manufacturing options are discussed.
Design methodology approach
Production characteristics, such as surface quality, dimensional accuracy, material range, mechanical properties and applications, are reviewed and discussed. The process parameters for both LB-PBF and LB-SM were identified, and different factors that caused defects in both processes are explored. Advantages, disadvantages and limitations are explained and analyzed to shed light on the process selection for both additive and subtractive processes.
Findings
The performance of subtractive and additive processes is highly related to the material properties, such as diffusivity, reflectivity, thermal conductivity as well as laser parameters. LB-PBF has more influential factors affecting the quality of produced parts and is a more complex process. Both LB-SM and LB-PBF are flexible manufacturing methods that can be applied to a wide range of materials; however, they both suffer from low energy efficiency and production rate. These may be useful when producing highly innovative parts detailed, hollow products, such as medical implants.
Originality value
This paper reviews the literature for both LB-PBF and LB-SM; nevertheless, the main contributions of this paper are twofold. To the best of the authors’ knowledge, this paper is one of the first to discuss the effect of the production process (both additive and subtractive) on the quality of the produced components. Also, some options for the hybrid capability of both LB-PBF and LB-SM are suggested to produce complex components with the desired macro- and microscale features.
Details
Keywords
Jingbin Hao, Xin Chen, Hao Liu and Shengping Ye
To remanufacture a disused part, a hybrid process needs to be taken in part production. Therefore, a reasonable machining route is necessary to be developed for the hybrid…
Abstract
Purpose
To remanufacture a disused part, a hybrid process needs to be taken in part production. Therefore, a reasonable machining route is necessary to be developed for the hybrid process. This paper aims to develop a novel process planning algorithm for additive and subtractive manufacturing (ASM) system to achieve this purpose.
Design/methodology/approach
First, a skeleton of the model is generated by using thinning algorithm. Then, the skeleton tree is constructed based on topological structure and shape feature. Further, a feature matching algorithm is developed for recognizing the different features between the initial model and the final model based on the skeleton tree. Finally, a reasonable hybrid machining route of the ASM system is generated in consideration of the machining method of each different sub-feature.
Findings
This paper proposes a hybrid process planning algorithm for the ASM system. Further, it generates new process planning insights on the hybrid process service provider market.
Practical implications
The proposed process planning algorithm enables engineers to obtain a proper hybrid machining route before product fabrication. And thereby, it extends the machining capability of the hybrid process to manufacture some parts accurately and efficiently.
Originality/value
This study addresses one gap in the hybrid process literature. It develops the first hybrid process planning strategy for remanufacturing of disused parts based on skeleton tree matching, which generates a more proper hybrid machining route than the currently available hybrid strategy studies. Also, this study provides technical support for the ASM system to repair damaged parts.
Details
Keywords
Usman Tariq, Ranjit Joy, Sung-Heng Wu, Muhammad Arif Mahmood, Asad Waqar Malik and Frank Liou
This study aims to discuss the state-of-the-art digital factory (DF) development combining digital twins (DTs), sensing devices, laser additive manufacturing (LAM) and subtractive…
Abstract
Purpose
This study aims to discuss the state-of-the-art digital factory (DF) development combining digital twins (DTs), sensing devices, laser additive manufacturing (LAM) and subtractive manufacturing (SM) processes. The current shortcomings and outlook of the DF also have been highlighted. A DF is a state-of-the-art manufacturing facility that uses innovative technologies, including automation, artificial intelligence (AI), the Internet of Things, additive manufacturing (AM), SM, hybrid manufacturing (HM), sensors for real-time feedback and control, and a DT, to streamline and improve manufacturing operations.
Design/methodology/approach
This study presents a novel perspective on DF development using laser-based AM, SM, sensors and DTs. Recent developments in laser-based AM, SM, sensors and DTs have been compiled. This study has been developed using systematic reviews and meta-analyses (PRISMA) guidelines, discussing literature on the DTs for laser-based AM, particularly laser powder bed fusion and direct energy deposition, in-situ monitoring and control equipment, SM and HM. The principal goal of this study is to highlight the aspects of DF and its development using existing techniques.
Findings
A comprehensive literature review finds a substantial lack of complete techniques that incorporate cyber-physical systems, advanced data analytics, AI, standardized interoperability, human–machine cooperation and scalable adaptability. The suggested DF effectively fills this void by integrating cyber-physical system components, including DT, AM, SM and sensors into the manufacturing process. Using sophisticated data analytics and AI algorithms, the DF facilitates real-time data analysis, predictive maintenance, quality control and optimal resource allocation. In addition, the suggested DF ensures interoperability between diverse devices and systems by emphasizing standardized communication protocols and interfaces. The modular and adaptable architecture of the DF enables scalability and adaptation, allowing for rapid reaction to market conditions.
Originality/value
Based on the need of DF, this review presents a comprehensive approach to DF development using DTs, sensing devices, LAM and SM processes and provides current progress in this domain.
Details
Keywords
Eric Weflen and Matthew Charles Frank
This study presents a method for fabricating multi-material objects using a hybrid additive and subtractive approach. By hybridizing the material composition in addition to the…
Abstract
Purpose
This study presents a method for fabricating multi-material objects using a hybrid additive and subtractive approach. By hybridizing the material composition in addition to the fabrication process, functional requirements can be met more effectively than through homogenous material parts produced using a single manufacturing process. Development of multi-material objects consisting of dissimilar materials that have been hampered by a lack of a structural interface compatible with in-envelope hybrid additive and subtractive manufacturing.
Design/methodology/approach
This research presents a novel method for producing multi-material components through in-envelope hybrid additive and subtractive manufacturing. This study attempts to address the absence of a metal-polymer interface by integrating polymer additive manufacturing into a five-axis mill. The ability of the polymer additive system to reproduce overhang geometries is assessed with different levels of cooling. The relationship between structural performance, cooling and material flow rate is evaluated for the deposited carbon fiber reinforced acrylonitrile butadiene styrene.
Findings
A mechanically interlocking root structure is developed to form an interface between a machined aluminum region and a polymer region of an object. The tensile strength of the metal-polymer object is measured and found to be on the same order of magnitude as the bulk three-dimensional printed polymer.
Originality/value
By targeting the material properties to the local functional requirements within a part and taking advantage of both additive and subtractive manufacturing processes, this study will enable broader design options and optimization of performance metrics.
Details
Keywords
Victoria Townsend and Jill Urbanic
The purpose of this paper is to relate additive manufacturing (AM) and machining (CNC) synergistically in a modular approach in the design and manufacturing domains, to generate…
Abstract
Purpose
The purpose of this paper is to relate additive manufacturing (AM) and machining (CNC) synergistically in a modular approach in the design and manufacturing domains, to generate value for end‐users and manufacturers (a teleological system).
Design/methodology/approach
The research methodology decomposes a part into modules, by employing a teleological systems theory approach paired with principles of modular design. Modules are manufactured with either additive manufacturing (fused deposition modeling, FDM) or machining (CNC). Process selection is determined by a decision‐making framework that quantifies strength and weakness comparisons of FDM and CNC machining processes, accomplished using the analytic hierarchy process (AHP).
Findings
The developed methodology and decision‐making framework is successfully applied to the design and manufacturing of a large, complex V6 engine section sand casting pattern. This case study highlights the merits of the research.
Research limitations/implications
The research assumes that the processes being considered are capable of meeting the product functional requirements. The proposed methodology can be extended to evaluate additional processes.
Practical implications
Value is assessed in this research relative to: time and cost opportunities, managing knowledge limitations of a process by leveraging hybrid options, and aligning design and manufacturing to create a product that accomplishes the goals of the end‐user (teleological effectiveness).
Originality/value
Utilizing the AHP process and a teleological perspective are new, and proven effective, approaches in relating additive and subtractive processes in a hybrid approach with end‐user perspectives. The research demonstrates a systematic methodology to quantify additive and subtractive process selection.
Details
Keywords
Pedram Parandoush, Palamandadige Fernando, Hao Zhang, Chang Ye, Junfeng Xiao, Meng Zhang and Dong Lin
Additively manufactured objects have layered structures, which means post processing is often required to achieve a desired surface finish. Furthermore, the additive nature of the…
Abstract
Purpose
Additively manufactured objects have layered structures, which means post processing is often required to achieve a desired surface finish. Furthermore, the additive nature of the process makes it less accurate than subtractive processes. Hence, additive manufacturing techniques could tremendously benefit from finishing processes to improve their geometric tolerance and surface finish.
Design/methodology/approach
Rotary ultrasonic machining (RUM) was chosen as a finishing operation for drilling additively manufactured carbon fiber reinforced polymer (CFRP) composites. Two distinct additive manufacturing methods of fused deposition modeling (FDM) and laser-assisted laminated object manufacturing (LA-LOM) were used to fabricate CFRP plates with continuous carbon fiber reinforcement. The influence of the feedrate, tool rotation speed and ultrasonic power of the RUM process parameters on the aforementioned quality characteristics revealed the feasibility of RUM process as a finishing operation for additive manufactured CFRP.
Findings
The quality of drilled holes in the CFRP plates fabricated via LA-LOM was supremely superior to the FDM counterparts with less pullout delamination, smoother surface and less burr formation. The strong interfacial bonding in LA-LOM proven to be superior to FDM was able to endure higher cutting force of the RUM process. The cutting force and cutting temperature overwhelmed the FDM parts and induced higher surface damage.
Originality/value
Overall, the present study demonstrates the feasibility of a hybrid additive and subtractive manufacturing method that could potentially reduce cost and waste of the CFRP production for industrial applications.
Details
Keywords
Pieter Johannes Theron Conradie, Dimitri Dimitrov, Gert Adriaan Oosthuizen, Philip Hugo and Mike Saxer
The purpose of this paper is to investigate the combination of selective laser melting (SLM) and 5-axis CNC milling to produce parts from titanium powder. The aim is to achieve a…
Abstract
Purpose
The purpose of this paper is to investigate the combination of selective laser melting (SLM) and 5-axis CNC milling to produce parts from titanium powder. The aim is to achieve a more resource-efficient manufacturing process by reducing material wastage and machining time, while adhering to quality requirements.
Design/methodology/approach
A benchmark titanium aerospace component is manufactured with two different approaches using subtractive and additive manufacturing technologies. The first component is produced from a solid billet using only 5-axis CNC milling. The second component is grown from powder using SLM to produce a net-shaped part of which the final shape and part accuracy are achieved through 5-axis CNC milling. The potential saving of material and machining time of the process combination is evaluated by comparing it to the conventional purely CNC approach. The form accuracy, surface finish, mechanical properties and tool wear for the two processes are also compared.
Findings
The results show that the process combination can be used to produce Ti components that adhere to aerospace standards. With the process combination, a material saving of 87 per cent was achieved along with a reduction of 21 per cent in machining time. Further improvements are possible using optimized SLM build and machining strategies.
Originality/value
This paper presents the results of a resource efficiency assessment on the combination of SLM and 5-axis CNC milling for the titanium alloy, Ti6Al4V. It is expected that this process combination can make a significant contribution towards reducing material wastage and machining time for aerospace applications.
Details