Search results

The ecological environment of the Loess Plateau, China, is extremely fragile under the context of global warming. Over the past two decades, the vegetation of the Loess Plateau has undergone great changes. This paper aims to clarify the response mechanisms of vegetation to climate change, to provide support for the restoration and environmental treatment of vegetation on the Loess Plateau.

The Savitsky–Golay (S-G) filtering algorithm was used to reconstruct time series of moderate resolution imaging spectroradiometer (MODIS) 13A2 data. Combined with trend analysis and partial correlation analysis, the influence of climate change on the phenology and enhanced vegetation index (EVI) during the growing season was described.

The S-G filtering algorithm is suitable for EVI reconstruction of the Loess Plateau. The date of start of growing season was found to gradually later along the Southeast–Northwest direction, whereas the date of the end of the growing season showed the opposite pattern and the length of the growing season gradually shortened. Vegetation EVI values decreased gradually from Southeast to Northwest. Vegetation changed significantly and showed clear differentiation according to different topographic factors. Vegetation correlated positively with precipitation from April to July and with temperature from August to November.

This study provides technical support for ecological environmental assessment, restoration of regional vegetation coverage and environmental governance of the Loess Plateau over the past two decades. It also provides theoretical support for the prediction model of vegetation phenology changes based on remote sensing data.

The paper aims to investigate the possible changes in mean temperature in the Mongolian Plateau associated with the 1.5 and 2°C global warming targets and how snow changes in the Mongolian Plateau when the mean global warming is well below 2°C or limited to 1.5°C.

In total, 30 model simulations of consecutive temperature and precipitation days from Coupled Model Inter-comparison Project Phase 5 (CMIP5) are assessed in comparison with the 111 meteorological monitoring stations from 1961–2005. Multi-model ensemble and model relative error were used to evaluate the performance of CMIP5 models. Slope and the Mann–Kendall test were used to analyze the magnitude of the trends and evaluate the significance of trends of snow depth (SD) from 1981 to 2014 in the Mongolian Plateau.

Some models perform well, even better than the majority (80%) of the models over the Mongolian Plateau, particularly HadGEM2-CC, CMCC-CM, BNU-ESM and GFDL-ESM2M, which simulate best in consecutive dry days (CDD), consecutive wet days (CWD), cold spell duration indicator (CSDI) and warm spell duration indicator (WSDI), respectively. Emphasis zones of WSDI on SD were deeply analysed in the 1.5 and 2 °C global warming period above pre-industrial conditions, because it alone has a significant negative relation with SD among the four indices. It is warmer than before in the Mongolian Plateau, particularly in the southern part of the Mongolian Plateau, indicating less SD.

Providing climate extremes and SD data sets with different spatial-temporal scales over the Mongolian Plateau. Zoning SD potential risk areas and proposing adaptations to promote regional sustainable development.

This study determined factors that influenced patients' knowledge, attitudes and practices (KAP) regarding uncomplicated malaria in primary healthcare (PHC) facilities of Plateau state, Nigeria.

The data of 956 patients treated for uncomplicated malaria in PHC facilities of Plateau state were used for the study. Inferential statistical analyses were conducted to identify factors that influenced patients' KAP on the disease and its management.

The study revealed age (p < 0.001), level of education (p = 0.012), attitudes (p = 0.007) and practices (p < 0.001) as significant predictors of knowledge outcomes on uncomplicated malaria, while their attitudes towards the disease and its management was predicted by their gender (p = 0.011), occupation (p = 0.049), monthly income (p = 0.018), knowledge (p < 0.001) and practices (p < 0.001). Furthermore, their practices were significantly predicted by monthly incomes (p = 0.043), knowledge (p < 0.001), attitudes (p < 0.001) and number of anti-malarial and adjunct drugs administered to them (p = 0.041).

The study revealed a mixed influence of patients' characteristics on their KAP outcomes. This calls for appropriate intervention measures towards achieving the desired patients' therapeutic outcomes.

Based on the survey data of 1,152 households in three provinces of Shaanxi, Gansu and Ningxia on the Loess Plateau, this paper aims to empirically analyze the impact of aging and off-farm employment on farmers’ adoption behavior of soil and water conservation technology. This paper analyzes the moderating effect of social network and the mediating effect of technological cognition in this impact relationship.

Based on the above analysis, the second part of this paper is based on relevant theories and constructs a theoretical model of the relationship of aging, off-farm employment, social network, technology cognition and farmers’ adoption behavior of soil and water conservation technology. The third part introduces research methods, variable selection and descriptive statistics analysis of variables. The fourth part, based on the data of Shaanxi, Gansu and Ningxia provinces in the Loess Plateau in 2016, empirically analyzes the impact of aging, off-farm employment and social network on the farmers’ adoption behavior of soil and water conservation technology. This paper further examines the moderating effect of social network and the mediating effect of technology cognition in this influence relationship. Finally, based on the findings of the empirical study, this paper puts forward countermeasures and suggestions.

First, aging and off-farm employment have a significant negative impact on farmers’ adoption behavior of soil and water conservation technology, while social network has a significant positive effect. Second, social network has alleviated the effect of aging and off-farm employment on restraining farmers’ adoption behavior of soil and water conservation technology. Third, aging and off-farm employment have restrained farmers’ cognition of soil and water conservation technology. Social network has promoted farmers’ cognition of soil and water conservation technology. Social network plays a moderating role in the impact of aging and off-farm employment on farmers’ cognition of soil and water conservation technology. Technology cognition plays a mediating role in the impact of social network on farmers’ adoption behavior of soil and water conservation technology.

This paper integrates the aging, off-farm employment and social network into the same analytical framework and reveals their impact on farmers’ adoption behavior of soil and water conservation technology and its action mechanism, which enriches the impact of human capital and social network on farmers’ adoption behavior of soil and water conservation technology. Then taking the social network as a moderator variable, the paper verifies its moderating effect on the relationship of aging, off-farm employment and farmers’ adoption behavior of soil and water conservation technology. Farmers’ technology cognition should be included in the analysis framework to examine the impact of aging, off-farm employment and social network on farmers’ cognition of soil and water conservation technology. Taking the technology cognition as a mediator variable, the paper verifies its mediating effect on the relationship of aging, off-farm employment and farmers’ adoption behavior of soil and water conservation technology.

This paper aims to study the temporal and spatial variation of vegetation and the influence of climate change on vegetation coverage in the Yellow River basin, China. The current study aimed to evaluate the role of a series of government-led environmental control projects in restoring the ecological environment of the Yellow River basin.

This paper uses unary linear regression, Mann–Kendall and wavelet analyses to study the spatial–temporal variations of vegetation and the response to climate changes in the Yellow River, China.

The results showed that for the past 17 years, not only the mean annual increase rate of the Normalized Difference Vegetation Index (NDVI) was 0.0059/a, but the spatial heterogeneity also yields significant results. The vegetation growth in the southeastern region was significantly better than that in the northwestern region. The variation period of the NDVI in the study area significantly shortened, and the most obvious oscillation period was half a year, with two peaks in one year. In addition, there are positive and negative effects of human activities on the change of vegetation cover of the Loess Plateau. The project of transforming cultivated land to forest and grassland promotes the increase of vegetation cover of the Loess plateau. Unfortunately, the regional urbanization and industrialization proliferated, and the overloading of grazing, deforestation, over-reclamation, and the exploitation and development of the energy area in the grassland region led to the reduction of the NDVI. Fortunately, the positive effects outweigh the negative ones.

This paper provides a comprehensive insight to analysis of the vegetation change and the responses of vegetation to climate change, with special reference to make the planning policy of ecological restoration. This paper argues that ecological restoration should be strengthened in areas with annual precipitation less than 450 mm.

This paper aims to build a theoretical model of the impact of farmers’ adoption behavior of soil and water conservation measures on the agricultural output to analyze the impact of farmers’ adoption behavior of soil and water conservation measures on agricultural output.

Based on the field survey data of 808 farmers households in three provinces (regions) of the Loess Plateau, this paper using the endogenous switching regression model to analyze the effect of farmers’ adoption behavior of soil and water conservation measures on agricultural output.

Soil erosion has a significant negative impact on agricultural output, and soil erosion has a significant positive impact on farmers’ adoption of soil and water conservation measures. Farmers adopt soil and water conservation measures such as engineering measures, biological measures and tillage measures to cope with soil erosion, which can increase agricultural output. Based on the counterfactual hypothesis, if farmers who adopt soil and water conservation measures do not adopt the corresponding soil and water conservation measures, their average output per ha output will decrease by 2.01%. Then, if farmers who do not adopt soil and water conservation measures adopt the corresponding soil and water conservation measures, their average output per ha output will increase by 12.12%. Government support and cultivated land area have a significant positive impact on farmers’ adoption behavior of soil and water conservation measures.

The research limitation is the lack of panel data.

Soil erosion has a significant negative impact on agricultural output, and soil erosion has a significant positive impact on farmers’ adoption of soil and water conservation measures. Farmers adopt soil and water conservation measures such as engineering measures, biological measures and tillage measures to cope with soil erosion, which can increase agricultural output.

The conclusion provides a reliable empirical basis for the government to formulate and implement relevant policies.

The contributions of this paper are as follows: the adoption behavior of soil and water conservation measures and agricultural output are included into the same analytical framework for empirical analysis, revealing the influencing factors of farmers’ adoption behavior of soil and water conservation measures and their output effects, enriching existing research. Using endogenous switching regression model and introducing instrumental variables to overcome the endogenous problem between the adoption behavior of soil and water conservation measures and agricultural output, and to analyze the influencing factors of farmers’ adoption behavior of soil and water conservation measures and its impact on agricultural output. Using the counter-factual idea to ensure that the two matched individuals have the same or similar attributes, to evaluate the average treatment effect of the behavior of soil and water conservation measures, to estimate the real impact of adaptation measures on agricultural output as accurately as possible and to avoid misleading policy recommendations.

This study aims to investigate the behaviour of soft lattices, i.e. lattices capable of reaching large deformations, and the influence of the printing process on it. The authors focused on two cell topologies, the body-centred cubic (BCC) and the Kelvin, characterized by a bending-dominated behaviour relevant to the design of energy-absorbing applications.

The authors analysed the experimental and numerical behaviour of multiple BCC and Kelvin structures. The authors designed homogenous and graded arrays of different dimensions. The authors compared their technical feasibility with two three-dimensional-printed technologies, such as the fused filament fabrication and the selective laser sintering, choosing thermoplastic polyurethane as the base material.

The results demonstrate that multiple design aspects determine how the printing process influences the behaviour of soft lattices. Besides, a graded distribution of the material could contribute to fine-tuning this behaviour and mitigating the influence of the printing process.

Despite being less explored than their rigid counterpart, soft lattices are now becoming of great interest, especially when lightweight, wearable and customizable solutions are needed. This study contributes to filling this gap.

Only a few studies analyse design and printing issues of soft lattices due to the intrinsic complexity of printing flexible materials.

Most support surfaces in comfort applications and sporting equipment are made from pressure-relieving foam such as viscoelastic polyurethane. However, for some users, foam is not the best material as it acts as a thermal insulator and it may not offer adequate postural support. The additive manufacturing of such surfaces and equipment may alleviate these issues, but material and design investigation is needed to optimize the printing parameters for use in pressure relief applications. This study aims to assess the ability of an additive manufactured flexible polymer to perform similarly to a viscoelastic foam for use in comfort applications.

Three-dimensional (3D) printed samples of thermoplastic polyurethane (TPU) are tested in uniaxial compression with four different infill patterns and varying infill percentage. The behaviours of the samples are compared to a viscoelastic polyurethane foam used in various comfort applications.

Results indicate that TPU experiences an increase in strength with an increasing infill percentage. Findings from the study suggest that infill pattern impacts the compressive response of 3D printed material, with two-dimensional patterns inducing an elasto-plastic buckling of the cell walls in TPU depending on infill percentage. Such buckling may not be a beneficial property for comfort applications. Based on the results, the authors suggest printing from TPU with a low-density 3D infill, such as 5% gyroid.

Several common infill patterns are characterised in compression in this work, suggesting the importance of infill choices when 3D printing end-use products and design for manufacturing.

This paper aims to examine the geochemical change experienced by laterites in Kerala, India, subjected to tropical monsoonal climate. These sediments are underlain by hard rock. The source rock characteristics have a major stake on the ultimate composition of sediments, as also the climatic conditions which an area experience.

Core samples have been obtained from several locations in a lateritic plateau. The upper portions of the borehole cores are composed of the lateritic hard cap, followed by lateritic soils. The soil samples were subjected to sediment texture analysis and XRF analysis (Bruker S4 Pioneer Sequential Wavelength-Dispersive XRF) for the determination of major elements ((in oxide form).

Major element geochemistry has revealed the following order of relative proportions of elements (in oxide form) SiO₂ > Al₂O₃ > Fe₂O₃ > TiO₂ >> Na₂O > P₂O₅ > CaO > K₂O > MgO > MnO. Even though the concentrations of SiO₂, Al₂O₃ and Fe₂O₃ contribute 90% of major element chemistry, there is no significant correlation found for these elements within themselves or with others.

Microscale movement of elements could not be characterised in this study. This requires access to an electron probe micro analyzer.

The practical implication of tropical weathering is that enhanced chemical leaching leads to movement of most elements out of the system, except for Al, leading to the possible formation of bauxite, or aluminous laterite.

The weathered products in this study provide livelihood sustenance for many of the local households, through manual production of laterite bricks, which are used in construction.

The indices of the intensity of chemical alteration/weathering like chemical index of alteration (CIA), chemical index of weathering (CIW) and weathering index of parker (WIP) reveal that the sediments indicate intense weathering of the source area prior to being deposited in the present location. This indicates enhanced monsoonal activity in the provenance areas, than that obtained today.

In the context of the question of how entrepreneurship education can contribute to entrepreneurial competency development, this paper aims to outline the deliberate practice (DP) method and showcase how it can be applied in entrepreneurship education. To this end, this paper presents a learning innovation in which DP improves entrepreneurial competencies.

The paper describes an entrepreneurship training in which participants, over a seven-week period, learn about DP and use this approach to develop an aspect of an entrepreneurial competency of their choosing.

Evaluations show that participants find both short- and long-term gains in their competency development, and value having learnt a competency development method as well.

The presented format is designed in accordance with the DP principles as originally described in the literature on expert performance, and shows that DP can be applied in the context of entrepreneurial competency development at lower levels of proficiency. Entrepreneurship educators interested in competency development can consider to adopt (aspects of) the described approach.

The format applies DP principles as described in the literature on expert performance. The value lies in the short- and long term effects of the training.