Search results

The whole garment technology offers a solution for the production efficiency by directly knitting a seamless tubular garment. Due to its complexity, high requirements and few references, the technology has not been widely applied in mass production. Therefore, the purpose of this paper is to show garment technology’s detailed design method, the technique calculation process and its merits compared than common technology.

This paper first analyzes the knitting principle of the four-bed computerized flat knitting machine from its configuration. After that, the design method is putted forward as well as the technique calculation process. To reveal the advantages of the whole garment technology, this paper builds a comprehensive evaluation system by comparing the knitting time, labor cost and the yarn consumption.

With the evaluation system, the whole garment technology is proved to be more productive, cost-saving and less materials-consuming. Moreover, this advantage stands more out when the machine gage is higher.

Due to limited research time and references, this paper only presents the whole garment technology for knitting common and traditional styles. More complicated and fashioned garments can be studied in the future research.

The design method and technology presented in this paper can be used as a reference for both the designers in the manufacture industry and the scholars for academic research works.

This paper has presented the whole garment technology and a specific method for technique calculation with consideration of garment structures. It also builds a evaluation system to show the advantages in terms of knitting efficiency, labor cost and yarn consumption.

Reviews the sizing systems developed in several countries — the USA, Austria, England, Germany, Hungary, Japan and South Korea. A comparison of these systems shows that: the way of labelling garment sizes has varied from one sizing system to another; most of the sizing systems classified figure types by height and drop value (the difference between hip girth and bust girth measurements), and the way of classifying garments and the key dimensions of garment types in each system was slightly different. Recognizing the need for greater uniformity, the International Organization for Standardization (ISO) developed an international size labelling system. Many countries, including England, Japan, South Korea and Hungary, revised their size labelling systems by adopting the ISO system.

Considering only two-dimensional (2D) ease allowance cannot fully reflect the three-dimensional (3D) relationship between the position of clothing and the human body. The purpose of this paper is to propose a method with a 3D space vector and corresponding distance ease to characterize fitting garments and then used to construct personalized clothing for similar shape body.

Firstly, a 3D scanner was used to obtain mannequin and fitted garment data, and 17 layers of cross-sections of the upper body were extracted. Then, 37 space vectors and corresponding space angles on each cross-section were obtained with the original point. Secondly, the detailed distance ease between the mannequin and garment was constructed due to the difference between garment vectors and body vectors. Thirdly, the distance ease mathematical models were achieved and used to calculate distance ease on a similar shape body. Additionally, the fit garment is constructed, and the garment pattern is altered by the geometric pattern alteration method.

The results show that 3D space vectors can explain the relationship between body skin and garment surface of the upper body properly. The distance ease is modeled by mathematic expressions and successfully used to make a new garment to fit a similar shape body.

The proposed method of constructing garments based on distance ease and 3D space vectors can create a fitted garment for a similar shape body effectively and accurately. It is useful for the personalized garment design and suitable for the manufacturing process.

Pressure therapy is generally accepted as an effective means of preventing and controlling hypertrophic scarring after burn injury. Pressure treatment based principally on the use of pressure garments is widely used in Hong Kong and many other countries. These garments are tailor‐made to the individual patient's measurement to provide a uniform and firm support to body contours, and they are designed individually for the area of injury. Attempts to review the existing practice of the various kinds of pressure garments on patients, and to provide a better understanding of the present use of fabric and production methods employed in the manufacturing of the garments. Includes a brief account of the problems encountered by both the patients and the medical staff.

The purpose of this paper is to investigate contemporary practice in product development for clothing sold by UK fashion retailers, focusing on three essential types of participant: textile designers, fashion designers, and fashion buyers.

Interviews were conducted with practitioners working in textile design, fashion design and fashion buying in clothing suppliers, a design agency and fashion retailers, from which case studies were compiled.

The case studies provide evidence that communication skills have become particularly significant to enable effective collaboration during fashion product development. The three roles discussed in the paper have a high degree of congruence in their responsibilities, particularly in terms of awareness of fashion trends and market.

There is an overlap between textile design, fashion design, fashion buying and other roles in the fashion business, evidenced by the case studies in the paper. Therefore the congruence between various roles and processes within the fashion business could potentially be analysed. The paper has concentrated on the mass market fashion business in the UK and the same roles mentioned here could be investigated in other countries or at different market levels.

Whole garment knitwear is one of the knitwear development trends in the foreseeable future for its advantages of environmental friendliness and wearing comfort. However, the development of new styles of the whole garment knitwear requires both fashion design and computer programming, which makes it time-consuming and difficult. In this paper, a whole garment knitted skirt template Library is introduced to solve this problem.

The template library composes of silhouette module, design element module and parts shaping technology module. It was built based on a comprehensive investigation of design and technology. By adhering to the principle of similarity and reusability, the template library of whole garment knitted skirts was established through the innovative design and hierarchical classification of compressed patterns and package patterns.

With the template library, more than 7.7 × 1025 package pattern templates can be generated through the permutation and combination of the package pattern templates of design elements and parts shaping technology.

The results indicated that it can accelerate the design process and improve the design efficiency of new styles with the template library. This approach can also provide inspiration for the designers and realize rapid response and personalized customization of knitted garment production. In addition, the whole garment templates can be applied into constructing other types of clothing template libraries, such as jackets, pants, etc.

Examines the thirteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Examines the fourteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Examines the fifteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Examines the fifthteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.