Search results

This study aimed to assess the influence of the community-based campaign on weight loss and healthy lifestyle adoption among Bahrain's adult population.

A cross -sectional self-reported online questionnaire completed in February 2021. The survey evaluated the impact of the community-based campaign health program which includes (exercise, diet plan and psychological eating behavior) weight reduction using social media platforms. The authors employed data from young and middle-aged healthy adults (n = 842) between the ages of 18-55 years, of both sexes. The intervention group (n = 842) was made up of the supporters of the voluntary community initiative called Obesity does not Suit Me (n = 194), and the control group (n = 648) was made up of non-followers of the campaign.

The study showed a statistically significant difference among the followers of the community-based campaign health program in the following parameters: 3.90-4.23 kg less, 1.46-1.59 difference in BMI and 0.05-0.06 WHR. All changes were of low effect size.

Diet and exercise had significant impact on weight, BMI and WHR among the followers of the community campaign. However, more research is required for sponsorship to increase the motivation and rewards for the community campaign.

This study aims to investigate how primary teachers, when taking part in digital didactic design (D³) workshops at the Digital Laboratory Centre at the university, develop their insights about how digital tools can be designed and further used in their teaching of science. The research question addresses how D³ can be used to develop primary teachers’ knowledge about teaching science with digital technologies.

During two semesters, 14 primary science teachers from three different schools participated in an in-service course at the university. Five D³ workshops lasting 4 h each were conducted with the aim to analyze, design and implement digital tools based on the needs of teachers and students. This includes discussions about the technological, pedagogical and content knowledge (TPACK) framework and further recommendations about how to choose, design, implement and evaluate digital tools for different teaching and learning situations. In between the workshops, the teachers were told to reflect on their experiences with colleagues and students and share their ideas and reflections to support collegial learning.

The results indicate that D³ has an opportunity to promote deep learning experiences with a framework that encourages teachers and researchers to study, explore and analyze the applied designs-in-practice, where teachers take part in the design process. This study further indicates that having teachers explicitly articulates their reasoning about designing digital applications to engage students’ learning that seems important for exploring the types of knowledge used in these design practices and reflecting on aspects of their teaching with digital technologies likely to influence their TPACK.

This research indicates that the increasing prevalence of information communication technology offers challenges and opportunities to the teaching and learning of science and to the scientific practice teachers might encounter. It offers solutions by investigating how primary teachers can design their own digital technology to meet students’ science learning needs. One limitation might be that the group of 14 teachers cannot be generalized to represent all teachers. However, this study gives implications for how to work with and for teachers to develop their knowledge of digital technologies in teaching.

As this project shows teachers can take an active part in the digital school development and as such become producer of knowledge and ideas and not only become consumers in the jungle of technical applications that are implemented on a school level. Therefore, it might well be argued that in science teaching, paying more careful attention to how teachers and researchers work together in collaborative settings, offers one way of better valuing science teachers’ professional knowledge of practice. As such, an implication is that digital applications are not made “for” teachers but instead “with” and “by” teachers.

The society puts high demands om teachers’ knowledge and competencies to integrate digital technologies into their daily practices. Building on teachers’ own needs and concerns, this project addresses the challenge for teachers as a community to be better prepared for and meet the societal challenge that digitalization means for schools.

Across the field of science education, knowledge about the relation between teachers’ use of digital technology and how it might (or might not) promote students’ learning offers access to ideas of how to design and implement teacher professional development programs. This offers enhanced communication opportunities between schools and universities regarding school facilities and expectations of technology to improve teachers’ experiences with integrating technology into their learning and teaching. This pragmatic approach to research creates theory and interventions that serve school practice but also produces challenges for design-based researchers.

The aim of this research paper is to design a motor holder in order to minimize the weight of the motor and to reduce its vibrations causing noise pollution.

To meet the requirements of the purpose the use of cellular lattice structures is ideal. Lattice structures ensure both low mass and high strength. Moreover, their absorption properties are relatively interesting concerning the attenuation of vibrations.

The result of this paper shows that lattice structure can answer to the need of different fields such as aeronautics in the design of lightweight structures which are strong with a low mass. Indeed, the weight of the final structure of the holder is 0.92 g and its safety factor is 5.1 which met the requirements.

The limitations of the research paper were the RAM capacity of the computer.

To minimize the weight of the holder in a patroller or a plane is to reduce the consumption of fuel. Moreover one of the reasons of optimizing the vibrations is to reduce noise pollution.

This paper is directed to students, designers who want to know more about the use of lattice structure and more precisely honeycomb sandwich structure.

The purpose of this paper is to assess the feasibility and benefits of providing weight management support via the workplace.

Quasi-experimental design using non-random assignment to a 12-week Slimming World (SW) weight management programme, either within the workplace or at a regular community group. Weight was recorded weekly and a 39-item questionnaire focused on mental and emotional health, self-esteem, dietary habits and physical activity habits administered at baseline, 12 weeks, six and 12 months.

In total, 243 participants enroled (workplace n=129, community n=114) with 138 completers (defined as those weighing-in at baseline and attending at least once within the last four weeks; workplace n=76, community n=62). Completers reported a mean weight change of −4.9 kg±3.4 or −5.7 per cent±3.8. Mental and emotional health scores increased (p < 0.05) from baseline to 12 weeks. Self-worth scores increased (p < 0.05) from baseline to 12 weeks, six and 12 months. Healthy dietary habit scores increased and unhealthy dietary habit scores decreased (p < 0.05) from baseline to 12 weeks, six and 12 months. Healthy physical activity habit scores improved (p < 0.05) from baseline to 12 weeks and six months. There were no significant differences between groups.

Participant demographic was predominantly female (94 per cent) aged 42.3 years, with only 13 men participating.

The results support the use of a 12-week SW weight management programme as a credible option for employers wanting to support staff to achieve weight loss and improve psycho-social health outcomes which could lead to improvements in quality of life and work performance.

Provides evidence for the delivery of weight management support via the workplace.

International outbreak of the SARS-CoV-2 infection has fostered the Italian government to impose the FFP2 protective facial masks in closed environments, including bar, restaurants and, more in general, in the food sector. Protective facial masks are rocketing, both in mass and in costs, in the food sector imposing efforts in fostering reuse strategies and in the achievement of sustainable development goals. The scope of the present paper is to depict possible strategies in manufacturing and reuse strategies that can reduce the carbon footprint (CF) of such devices.

To implement circular economy strategies in the protective facial masks supply chain, it was considered significant to move towards a study of the environmental impact of such devices, and therefore a CF study has been performed on an FFP2 facial mask used in the food sector. Different materials besides the mostly used polypropylene (PP) (polyethylene (PE), polycarbonate (PC), poly (lactic acid) (PLA), cotton, polyurethane (PUR), polystyrene (PS) and nylon 6,6) and different sanitisation alternatives as reuse strategies (both laboratory and homemade static oven, ultraviolet germicidal irradiation) readily implemented have been modelled to calculate the CF of a single use of an FFP2 mask.

The production of textiles in PP, followed by disposal was the main contributor to CF of the single-use FFP2 mask, followed by packaging and transportations. PP and PE were the least impacting, PC, cotton and Nylon 6-6 of the same weight results the worst. PLA has an impact greater than PP and PE obtained from crude oil, followed by PUR and PS. Static laboratory oven obtained an 80.4% reduction of CF with respect to single use PP-made FFP2 mask, whereas homemade oven obtained a similar 82.2% reduction; UV cabinet is the best option, showing an 89.9% reduction.

The key strategies to reduce the environmental impacts of the masks (research for new materials and reuse with sanitisation) should ensure both the retention of filtering capacities and the sanitary sterility of the reused ones. Future developments should include evaluations of textile recycling impacts, using new materials and the evaluation of the life cycle costs of the reused masks.

This paper intends to provide to stakeholders (producers, consumers and policy makers) the tools to choose the best option for producing and reuse environmentally friendly protective facial masks to be used in the food sector, by using both different materials and easily implemented reuse strategies.

The reduction of the CF of protective facial masks in the food sector surely will have relevant positive effects on climate change contributing to reach the goals of reducing CO₂ emissions. The food sector may promote sustainable practices and attract a niche piece of clients particularly sensible to such themes.

The paper has two major novelties. The first one is the assessment of the CF of a single use of an FFP2 mask made with different materials of the non-woven filtering layers; as the major contribution to the CF of FFP2 masks is related to the non-woven textiles manufacturing, the authors test some other different materials, including PLA. The second is the assessment of the CF of one single use of a sanitised FFP2 mask, using different sanitation technologies as those allowed in bars or restaurants.

This paper aims to evaluate the effect of consumption of a high-fat diet (HFD) rich with total saturated fats on adiposity and serum levels of vascular cell adhesion molecule (sVCAM-1), a biomarker of endothelial inflammation/dysfunction. Another aim is to evaluate whether supplementation of a phytosomal formulation of curcumin would reduce adiposity measures and sVCAM-1 levels in HFD rats.

The study was conducted on 17 male rats which were allocated to one of three feeding regimen groups: normal diet (ND); HFD, or HFD with dietary phytosomal curcumin (HFD-C). Anthropometric measures were recorded weekly up to 20 weeks of feeding intervention, at the end of which, sVCAM-1 levels were also compared with one-way ANOVA and Tukey post-hoc analysis.

The HFD group had the greatest values for raw anthropometric data, and there was a group difference in anthropometric measures, however there was no significant difference between HFD and HFD-C for any measure. The gain at 20 weeks from initial values did reveal significant differences in weight and abdominal circumference between HFD and HFD-C groups. There were significant group differences in sVCAM-1 levels, with only HFD-C displaying significant lower levels than HFD group.

This is the first study that shows the capacity of a phytosomal formulation of curcumin in reducing adiposity and sVCAM-1 levels during daily intake of saturated fats above the recommended level. The results are promising in that this formulation can protect against endothelial inflammation/dysfunction, and can be used as complimentary therapy to suppress dyslipidemia/obesity-related cardiovascular complications.

This paper aims to comprehensively clarify the research status of thermal transport of supercritical aviation kerosene, with particular interests in the effect of cracking on heat transfer.

A brief review of current research on supercritical aviation kerosene is presented in views of the surrogate model of hydrocarbon fuels, chemical cracking mechanism of hydrocarbon fuels, thermo-physical properties of hydrocarbon fuels, turbulence models, flow characteristics and thermal performances, which indicates that more efforts need to be directed into these topics. Therefore, supercritical thermal transport of n-decane is then computationally investigated in the condition of thermal pyrolysis, while the ASPEN HYSYS gives the properties of n-decane and pyrolysis products. In addition, the one-step chemical cracking mechanism and SST k-ω turbulence model are applied with relatively high precision.

The existing surrogate models of aviation kerosene are limited to a specific scope of application and their thermo-physical properties deviate from the experimental data. The turbulence models used to implement numerical simulation should be studied to further improve the prediction accuracy. The thermal-induced acceleration is driven by the drastic density change, which is caused by the production of small molecules. The wall temperature of the combustion chamber can be effectively reduced by this behavior, i.e. the phenomenon of heat transfer deterioration can be attenuated or suppressed by thermal pyrolysis.

The issues in numerical studies of supercritical aviation kerosene are clearly revealed, and the conjugation mechanism between thermal pyrolysis and convective heat transfer is initially presented.

The purpose of this paper is to create an automatic interpretation of the results of the method of multiple correspondence analysis (MCA) for categorical variables, so that the nonexpert user can immediately and safely interpret the results, which concern, as the authors know, the categories of variables that strongly interact and determine the trends of the subject under investigation.

This study is a novel theoretical approach to interpreting the results of the MCA method. The classical interpretation of MCA results is based on three indicators: the projection (F) of the category points of the variables in factorial axes, the point contribution to axis creation (CTR) and the correlation (COR) of a point with an axis. The synthetic use of the aforementioned indicators is arduous, particularly for nonexpert users, and frequently results in misinterpretations. The current study has achieved a synthesis of the aforementioned indicators, so that the interpretation of the results is based on a new indicator, as correspondingly on an index, the well-known method principal component analysis (PCA) for continuous variables is based.

Two (2) concepts were proposed in the new theoretical approach. The interpretative axis corresponding to the classical factorial axis and the interpretative plane corresponding to the factorial plane that as it will be seen offer clear and safe interpretative results in MCA.

It is obvious that in the development of the proposed automatic interpretation of the MCA results, the authors do not have in the interpretative axes the actual projections of the points as is the case in the original factorial axes, but this is not of interest to the simple user who is only interested in being able to distinguish the categories of variables that determine the interpretation of the most pronounced trends of the phenomenon being examined.

The results of this research can have positive implications for the dissemination of MCA as a method and its use as an integrated exploratory data analysis approach.

Interpreting the MCA results presents difficulties for the nonexpert user and sometimes lead to misinterpretations. The interpretative difficulty persists in the MCA's other interpretative proposals. The proposed method of interpreting the MCA results clearly and accurately allows for the interpretation of its results and thus contributes to the dissemination of the MCA as an integrated method of categorical data analysis and exploration.

The purpose of this paper is to present the status of the on-going development of the new computerized environment for aircraft synthesis and integrated optimization methods (CEASIOM) and to compare results of different aerodynamic tools. The concurrent design of aircraft is an extremely interdisciplinary activity incorporating simultaneous consideration of complex, tightly coupled systems, functions and requirements. The design task is to achieve an optimal integration of all components into an efficient, robust and reliable aircraft with high performance that can be manufactured with low technical and financial risks, and has an affordable life-cycle cost.

CEASIOM (www.ceasiom.com) is a framework that integrates discipline-specific tools like computer-aided design, mesh generation, computational fluid dynamics (CFD), stability and control analysis and structural analysis, all for the purpose of aircraft conceptual design.

A new CEASIOM version is under development within EU Project AGILE (www.agile-project.eu), by adopting the CPACS XML data-format for representation of all design data pertaining to the aircraft under development.

Results obtained from different methods have been compared and analyzed. Some differences have been observed; however, they are mainly due to the different physical modelizations that are used by each of these methods.

This paper summarizes the current status of the development of the new CEASIOM software, in particular for the following modules: CPACS file visualizer and editor CPACSupdater (Matlab) Automatic unstructured (Euler) & hybrid (RANS) mesh generation by sumo Multi-fidelity CFD solvers: Digital Datcom (Empirical), Tornado (VLM), Edge-Euler & SU2-Euler, Edge-RANS & SU2-RANS Data fusion tool: aerodynamic coefficients fusion from variable fidelity CFD tools above to compile complete aero-table for flight analysis and simulation.

This study aims to establish a Japanese-style healthcare program customized for Japan and Asia under ISO 9001: 2008 (ISO: International Organization for Standardization) to improve problem areas and to inspect the effectiveness of the program. Furthermore, the authors wanted to create this health program using the ISO widely available in Asian countries and make an international contribution.

The authors implemented a 6- to 10-month health program in Minowa Town, Matsumoto City and Nagano City in Japan. This study assessed findings from pedometric, anthropometric and blood pressure measurements and physical fitness, blood chemistry and brain function tests.

The comparisons were made by examining the interaction effects between groups of participants. Groups from three regions in Japan showed significant differences on the physical fitness tests; regarding the 10-meter obstacle walk, the results of the Minowa participants showed the greatest improvement and the Matsumoto participants showed the second greatest improvement. In the six-min walk, the time of the Minowa participants significantly improved.

This health education program, which has been conducted by the Japanese authors since 1998, measures anthropometry, brain function and physical fitness and performs blood tests before and after the program and it measures energy consumption with a pedometer during the program. With the aim of improving exercise via encouragement from friends and a sense of community with fellow participants, participants learn together with hands-on training in tai chi and aerobics about the importance of ongoing exercise and proper nutrition. This health education met the Health Education ISO in 2014.

Since 2010, Nagano Prefecture, including Minowa Town, Matsumoto City and Nagano City, where our study was carried out, has been the area with the highest life expectancy rates in Japan.

The authors want to make this health promotion through ISO widely available in Asian countries and an international contribution.

This study aimed to appropriately establish a Japanese-style healthcare program under the ISO 9001:2008 to improve problem areas and inspect its effectiveness.