Search results

This paper comprehensively addresses the influence of chopped strand mat glass fiber-reinforced polymer (GFRP) patch configurations such as geometry, dimensions, position and the number of layers of patches, whether a single or double patch is used and how well debonding the area under the patch improves the strength of the cracked aluminum plates with different crack lengths.

Single-edge cracked aluminum specimens of 150 mm in length and 50 mm in width were tested using the tensile test. The cracked aluminum specimens were then repaired using GFRP patches with various configurations. A three-dimensional (3D) finite element method (FEM) was adopted to simulate the repaired cracked aluminum plates using composite patches to obtain the stress intensity factor (SIF). The numerical modeling and validation of ABAQUS software and the contour integral method for SIF calculations provide a valuable tool for further investigation and design optimization.

The width of the GFRP patches affected the efficiency of the rehabilitated cracked aluminum plate. Increasing patch width WP from 5 mm to 15 mm increases the peak load by 9.7 and 17.5%, respectively, if compared with the specimen without the patch. The efficiency of the GFRP patch in reducing the SIF increased as the number of layers increased, i.e. the maximum load was enhanced by 5%.

This study assessed repairing metallic structures using the chopped strand mat GFRP. Furthermore, it demonstrated the superiority of rectangular patches over semicircular ones, along with the benefit of using double patches for out-of-plane bending prevention and it emphasizes the detrimental effect of defects in the bonding area between the patch and the cracked component. This underlines the importance of proper surface preparation and bonding techniques for successful repair.

This papers aims to study lattice structures in terms of geometric variables, manufacturing variables and material-based variants and their correlation with compressive behaviour for their application in a methodology for the design and development of personalized elastic therapeutic products.

Lattice samples were designed and manufactured using extrusion-based additive manufacturing technologies. Mechanical tests were carried out on lattice samples for elasticity characterization purposes. The relationships between sample stiffness and key geometric and manufacturing variables were subsequently used in the case study on the design of a pressure cushion model for validation purposes. Differentiated areas were established according to patient’s pressure map to subsequently make a correlation between the patient’s pressure needs and lattice samples stiffness.

A substantial and wide variation in lattice compressive behaviour was found depending on the key study variables. The proposed methodology made it possible to efficiently identify and adjust the pressure of the different areas of the product to adapt them to the elastic needs of the patient. In this sense, the characterization lattice samples turned out to provide an effective and flexible response to the pressure requirements.

This study provides a generalized foundation of lattice structural design and adjustable stiffness in application of pressure cushions, which can be equally applied to other designs with similar purposes. The relevance and contribution of this work lie in the proposed methodology for the design of personalized therapeutic products based on the use of individual lattice structures that function as independent customizable cells.

The aim of this study is to examine the behavioral intention (BI) to adopt the Coinbase Wallet by Spanish users.

A survey was administered to individuals residing in Spain between March and April 2021. There were 301 questionnaires analyzed. This research applies a new predictive model based on technology acceptance model (TAM) 2, the unified theory of acceptance and use of technology (UTAUT) model, the theory of perceived risk and the commitment trust theory. A mixed partial least squares structural equation modeling (PLS-SEM)/fuzzy-set qualitative comparative analysis (fsQCA) methodology was employed for the modeling and data analysis.

The results showed that all the variables proposed have a direct and positive influence on the intention to use a Coinbase Wallet. The findings present clear directions for traders, investors and academics focused on improving their understanding of the characteristics of these markets.

First, this study addresses important concerns relating to the adoption of crypto-wallets during the global pandemic. Second, this research contributes to the existing literature by adding electronic word of mouth (e-WOM), trust, web quality and perceived risk as new drivers of the intention to use the Coinbase Wallet, providing unique and innovative insights. Finally, the study offers a solid methodological contribution by integrating linear (PLS) and nonlinear (fsQCA) techniques, showing that both methodologies provide a better understanding of the problem and a more detailed awareness of the patterns of antecedent factors.

Output from the Irish Dairy Industry has grown rapidly since the abolition of quotas in 2015, with processors investing heavily in capacity expansion to deal with the extra milk volumes. Further capacity gains may be achieved by extending the processing season into the winter, a key enabler for which being the reduction of duration of the winter maintenance overhaul period. This paper aims to investigate if Lean Six Sigma tools and techniques can be used to enhance operational maintenance performance, thereby releasing additional processing capacity.

Combining the Six-Sigma Define, Measure, Analyse, Improve, Control (DMAIC) methodology and the structured approach of Turnaround Maintenance (TAM) widely used in process industries creates a novel hybrid model that promises substantial improvement in maintenance overhaul execution. This paper presents a case study applying the DMAIC/TAM model to Ireland’s largest dairy processing site to optimise the annual maintenance shutdown. The objective was to deliver a 30% reduction in the duration of the overhaul, enabling an extension of the processing season.

Application of the DMAIC/TAM hybrid resulted in process enhancements, employee engagement and a clear roadmap for the operations team. Project goals were delivered, and original objectives exceeded, resulting in €8.9m additional value to the business and a reduction of 36% in the duration of the overhaul.

The results demonstrate that the model provides a structure that promotes systematic working and a continuous improvement focus that can have substantial benefits for wider industry. Opportunities for further model refinement were identified and will enhance performance in subsequent overhauls.

To the best of the authors’ knowledge, this is the first time that the structure and tools of DMAIC and TAM have been combined into a hybrid methodology and applied in an Irish industrial setting.

A better understanding of the determinants of demand through accurate estimates of the elasticity of import demand can help policymakers and exporters improve their market access and competitiveness. This study analyzed the EU's demand for imported potato from major suppliers between 1994 and 2018, with the aim to evaluate the competitiveness of Egyptian potato.

This study adopted an import-differentiated framework to investigate demand relationships among the major potato suppliers to the EU's. To evaluate the competitiveness of Egyptian potato on the EU market, expenditure and price demand elasticities for various suppliers were calculated and compared.

The empirical results indicated that as income allocation of fresh potatoes increases, the investigated EU markets import more potatoes from other suppliers compared to imports from Egypt. The results show that EU importers may switch to potato imports from other suppliers as the import price of Egyptian potatoes increases, which enter the EU markets before domestically produced potatoes are harvested.

Due to data unavailability, the present study relied on yearly data on quantities and prices of EU potato imports. A higher frequency of observations should allow for considering seasonal effects, and thereby providing a more transparent picture of market dynamics and demand behavior of EU countries with respect to potato import from various sources of origin.

The study used a system-wide and source differentiated approach to analyze import demand. In particular, the empirical approach allowed for comparing different demand models (AIDS, Rotterdam, NBR and CBS) to filter out the superior and most suitable model for that data because the suitability and performance of a demand model depends rather on data than on universal criteria.

This paper aims to investigate the relationships amongst career patterns, neutrality of the state civil apparatus, and organizational performance of the local government in South Konawe District, Southeast Sulawesi Province in Indonesia.

Data were analyzed using Partial Least Squares Structural Equation Modeling (PLS-SEM) to investigate the relationships between variables through direct and indirect influence testing.

The findings reveal that career patterns influence neutrality and organizational performance. Neutrality of the state civil apparatus in politics mediates career patterns and local government organizational performance. The findings indicate that, first, promotions most significantly influence the organization’s neutrality and performance. Second, demotions have the least influence on the organization’s robustness and performance.

This paper is among the first to examine the relationships amongst career patterns, neutrality, and organizational performance. Recommendations are provided to improve neutrality and organizational performance, that is, the need to increase promotions and reduce demotions.

Mainland Tanzania has seen two decades of significant social policy reforms and transformations in its social and economic structures, whilst the country continues to grapple with persisting gender inequalities. This article examines Tanzania's social policy developments from a gender perspective. The authors analyse the level, reach and quality of social policy delivery to working-age women across the areas of health policy, social protection and employment policy during 2000–2021.

The article draws on qualitative research deploying the scoping review method. The data consist of diverse secondary materials, including academic publications, government policy documents, relevant statistics and other types of “grey” literature.

Tanzania has made significant advancements in the legal frameworks around welfare provision and has instituted increasingly gender-responsive government policy plans. The health and social protection sectors, in particular, have witnessed the introduction of large-scale measures expanding social policy implementation. However, social policy delivery remains two-tiered, with differences in provisions for women in the formal and informal sectors.

Social policy delivery and implementation have increased and diversified in Sub-Saharan Africa (SSA) during the new millennium, with a growing integration of gender-specific policy objectives. However, limited social policy scholarship has focused on the gendered effects of broader social policy models in SSA. The article remedies the concomitant knowledge gaps by examining various social policies and their impacts on working-age women in Mainland Tanzania. The authors also engage with the theoretical welfare regime literature and present an analytical framework for gender-sensitive assessment of emerging social policy models in the Global South.

This paper explores the Adoption of Technological Innovation (ATI) in the healthcare industry. It investigates how the literature has evolved, and what are the emerging innovation dimensions in the healthcare industry adoption studies.

We followed a mixed-method approach combining bibliometric methods and topic modeling, with 57 papers being deeply analyzed.

Our results identify three latent topics. The first one is related to the digitalization in healthcare with a specific focus on the COVID-19 pandemic. The second one groups up the word combinations dealing with the research models and their constructs. The third one refers to the healthcare systems/professionals and their resistance to ATI.

The study’s sample selection focused on scientific journals included in the Academic Journal Guide and in the FT Research Rank. However, the paper identifies trends that offer managerial insights for stakeholders in the healthcare industry.

ATI has the potential to revolutionize the health service delivery system and to decentralize services traditionally provided in hospitals or medical centers. All this would contribute to a reduction in waiting lists and the provision of proximity services.

The originality of the paper lies in the combination of two methods: bibliometric analysis and topic modeling. This approach allowed us to understand the ATI evolutions in the healthcare industry.

The purpose of this paper is to review cases of artificial reefs built through additive manufacturing (AM) technologies and analyse their ecological goals, fabrication process, materials, structural design features and implementation location to determine predominant parameters, environmental impacts, advantages, and limitations.

The review analysed 16 cases of artificial reefs from both temperate and tropical regions. These were categorised based on the AM process used, the mortar material used (crucial for biological applications), the structural design features and the location of implementation. These parameters are assessed to determine how effectively the designs meet the stipulated ecological goals, how AM technologies demonstrate their potential in comparison to conventional methods and the preference locations of these implementations.

The overview revealed that the dominant artificial reef implementation occurs in the Mediterranean and Atlantic Seas, both accounting for 24%. The remaining cases were in the Australian Sea (20%), the South Asia Sea (12%), the Persian Gulf and the Pacific Ocean, both with 8%, and the Indian Sea with 4% of all the cases studied. It was concluded that fused filament fabrication, binder jetting and material extrusion represent the main AM processes used to build artificial reefs. Cementitious materials, ceramics, polymers and geopolymer formulations were used, incorporating aggregates from mineral residues, biological wastes and pozzolan materials, to reduce environmental impacts, promote the circular economy and be more beneficial for marine ecosystems. The evaluation ranking assessed how well their design and materials align with their ecological goals, demonstrating that five cases were ranked with high effectiveness, ten projects with moderate effectiveness and one case with low effectiveness.

AM represents an innovative method for marine restoration and management. It offers a rapid prototyping technique for design validation and enables the creation of highly complex shapes for habitat diversification while incorporating a diverse range of materials to benefit environmental and marine species’ habitats.

The goal of this paper is to examine the mediating role of organizational social capital between family firms' organizational culture, characterized by their group vs individual orientation and external vs internal orientation, and their performance.

A structural equation model is developed and tested in a sample of 176 US family firms recruited through Prolific Academic.

The authors show that group vs individual cultural orientation fosters bonding social capital, while external vs internal cultural orientation fosters bridging social capital. In turn, family firm performance is only enhanced by bridging social capital, not bonding social capital, which appears to have neutral to negative direct performance effects. Nevertheless, it is noteworthy that bonding social capital facilitates the establishment of bridging ties, leading to overall positive performance outcomes.

The understanding of how organizational culture influences family business heterogeneity and performance, along with the clarification of how bonding social capital fosters or hinders performance, provides novel insights for researchers and practitioners seeking to understand the complexities within the unique context of family businesses.