Search results

This paper aims to present a human-in-the-loop natural teaching paradigm based on scene-motion cross-modal perception, which facilitates the manipulation intelligence and robot teleoperation.

The proposed natural teaching paradigm is used to telemanipulate a life-size humanoid robot in response to a complicated working scenario. First, a vision sensor is used to project mission scenes onto virtual reality glasses for human-in-the-loop reactions. Second, motion capture system is established to retarget eye-body synergic movements to a skeletal model. Third, real-time data transfer is realized through publish-subscribe messaging mechanism in robot operating system. Next, joint angles are computed through a fast mapping algorithm and sent to a slave controller through a serial port. Finally, visualization terminals render it convenient to make comparisons between two motion systems.

Experimentation in various industrial mission scenes, such as approaching flanges, shows the numerous advantages brought by natural teaching, including being real-time, high accuracy, repeatability and dexterity.

The proposed paradigm realizes the natural cross-modal combination of perception information and enhances the working capacity and flexibility of industrial robots, paving a new way for effective robot teaching and autonomous learning.

The purpose of this paper is to propose a robotic system for percutaneous surgery. The key component in the system, a robotic arm that can manipulate a puncture needle is presented. The mechanical design, the motion control and the force control method of the robotic arm are discussed in the paper.

The arm with an arc mechanism placed on a 3D Cartesian stage is developed as a puncture needle manipulator to locate the position of the needle tip, tune the needle’s posture and actuate the puncture motion under the visual guidance of two orthogonal X-ray images of a patient by a surgeon. A focusing method by using two laser spots is proposed to automatically move the needle tip to a surgery entry point on the skin. A dynamics model is developed to control the position of the needle mechanism and an explicit force control strategy is utilized to perform the needle insertion.

With the surgical system, a surgeon can easily perform puncture operation by taking two orthogonal real-time X-ray images as a visual feedback and accurately navigating the needle insertion. The laser-guided focusing method is efficient in placement of the needle tip. The explicit force control strategy is proved to be effective for holding constant and stable puncture force in experiments.

The robotic arm has an advantage in easy redirection of the needle because the rotation and the translation are decoupled in the mechanism. By adopting simple laser pens and a well-developed kinematics model, the system can handle the entry point, locating task automatically. The focusing method and the force control method proposed in the paper are useful for the present system and could be intuitive for similar surgical robots.

The purpose of this paper is to present an alternative solution for press-fit technology processes, which could improve the precision of the positioning movements and the stiffness of the structural elements.

A concept is presented and the related kinematics is described. Then, preliminary embodiment evaluations have been performed in terms of kinematics, force control and load distribution on the main structural elements.

Thanks to the additional leg, the proposed solution allows a preload that is capable of compensating the backlash of joints. The particular structure with four extendible legs and eight cardan joints ensures the parallelism between the ground and the plate holding the end effector, without any need of additional controls. However, it implies that the legs are not subjected to pure tension–compression stresses.

This work is focused on the conceptual phase of the design process, with only preliminary embodiment analysis that paves the way for subsequent and more detailed design steps. Especially concerning the actual stiffness of the system, comprehensive evaluations could be performed only after the identification of the particular parts/devices used to implement the main functional elements.

To the best of the authors’ knowledge, this is the first research work that comprehensively describes and analyzes the considered kinematics, within a real industrial application context.

This study aims to introduce the DoraHand, and the basic capability and performance have been verified in this paper. Besides the idea of sharing modular design and sensor design, the authors want to deliver an affordable and practical dexterous hand to the research area to contribute to the robotic manipulation area.

This paper introduced the DoraHand, a novel scalable and practical modular dexterous hand, which, adopting modular finger and palm design, fully actuated joint and tactile sensors, can improve the dexterity for robotic manipulation and lower the complexity of maintenance. A series of experiments are delivered to verify the performance of the hand and sensor module.

The parameters of the DoraHand are verified and suitable for the research of robotics manipulation area, the sensing capability has been tested with the static experiment and the slip prediction algorithm. And, the advantage of modular design and extensible interface have been verified by the real application.

The authors continue improving the DoraHand and extend it to more different applications. The authors want to make the DoraHand as a basic research platform in the robotic manipulation area.

The DoraHand has been sent to more than ten different research institutes for different research applications. The authors continue working on this hand for better performance, easier usage and more affordability.

This kind of dexterous hand can help researchers get rid of complex physical issues and pay more attention to the algorithm part; it can help to make robotic manipulation work more popular.

The key design in the DoraHand is the modular finger and sensing module. With the special design in mechanical and electrical parts, the authors build reliable hardware and can support the diversity requirement in the robotic manipulation area. The hand with tactile sensing capability can be used in more research and applications with its extensibility.

The purpose of this paper is to develop a highly miniaturized wireless inertial sensor system based on a novel 3D packaging technique using a flexible printed circuit (FPC). The device is very suitable for wearable applications in which small size and lightweight are required such as body area network, medical, sports and entertainment applications.

Modern wireless inertial measurement units are typically implemented on a rigid 2D printed circuit board (PCB). The design concept presented here is based around the use of a novel planar, six‐faceted, crucifix or cross‐shaped FPC instead of a rigid PCB. A number of specific functional blocks (such as microelectromechanical systems gyroscope and accelerometer sensors, microcontroller (MCU), radio transceiver, antenna, etc.) are first assigned to each of the six faces which are each 1 cm² in area. The FPC cross is then developed into a 1 cm³, 3D configuration by folding the cross at each of five bend planes. The result is a low‐volume and lightweight, 1 cm³ wireless inertial sensor that can sense and send motion sensed data wirelessly to a base station. The wireless sensor device has been designed for low power operation both at the hardware and software levels. At the base station side, a radio receiver is connected to another MCU unit, which sends received data to a personal computer (PC) and graphical user interface. The industrial, scientific and medical band (2.45 GHz) is used to achieve half duplex communication between the two sides.

A complete wireless sensor system has been realized in a 3D cube form factor using an FPC. The packaging technique employed during the work is shown to be efficient in fabricating the final cubic system and resulted in a significant saving in the final size and weight of the system. A number of design issues are identified regarding the use of FPC for implementing the 3D structure and the chosen solutions are shown to be successful in dealing with these issues.

Currently, a limitation of the system is the need for an external battery to power the sensor system. A second phase of development would be required to investigate the possibility of the integration of a battery and charging system within the cube structure. In addition, the use of flexible substrate imposes a number of restrictions in terms of the ease of manufacturability of the final system due to the requirement of the required folding step.

The small size and weight of the developed system is found to be extremely useful in different deployments. It would be useful to further explore the system performance in different application scenarios such as wearable motion tracking applications. In terms of manufacturability, component placement needs to be carefully considered, ensuring that there is sufficient distance between the components, bend planes and board edges and this leads to a slightly reduced usable area on the printed circuit.

This paper provides a novel and useful method for realizing a wireless inertial sensor system in a 3D package. The value of the chosen approach is that a significant reduction in the required system volume is achieved. In particular, a 78.5 per cent saving in volume is obtained in decreasing the module size from a 25 to a 15 mm³ size.

Simulations exist for the prediction of the behaviour of building structural systems under fire, including two-way coupled fire-structure interaction. However, these simulations do not include detailed models of the connections, whereas these connections may impact the overall behaviour of the structure. Therefore, this paper proposes a two-scale method to include screw connections.

The two-scale method consists of (a) a global-scale model that models the overall structural system and (b) a small-scale model to describe a screw connection. Components in the global-scale model are connected by a spring element instead of a modelled screw, and the stiffness of this spring element is predicted by the small-scale model, updated at each load step. For computational efficiency, the small-scale model uses a proprietary technique to model the behaviour of the threads, verified by simulations that model the complete thread geometry, and validated by existing pull-out experiments. For four screw failure modes, load-deformation behaviour and failure predictions of the two-scale method are verified by a detailed system model. Additionally, the two-scale method is validated for a combined load case by existing experiments, and demonstrated for different temperatures. Finally, the two-scale method is illustrated as part of a two-way coupled fire-structure simulation.

It was shown that proprietary ”threaded connection interaction” can predict thread relevant failure modes, i.e. thread failure, shank tension failure, and pull-out. For bearing, shear, tension, and pull-out failure, load-deformation behaviour and failure predictions of the two-scale method correspond with the detailed system model and Eurocode predictions. Related to combined load cases, for a variety of experiments a good correlation has been found between experimental and simulation results, however, pull-out simulations were shown to be inconsistent.

More research is needed before the two-scale method can be used under all conditions. This relates to the failure criteria for pull-out, combined load cases, and temperature loads.

The two-scale method bridges the existing very detailed small-scale screw models with present global-scale structural models, that in the best case only use springs. It shows to be insightful, for it contains a functional separation of scales, revealing their relationships, and it is computationally efficient as it allows for distributed computing. Furthermore, local small-scale non-convergence (e.g. a screw failing) can be handled without convergence problems in the global-scale structural model.

To recover the growing deficit between American and near-peer mobile artillery ranges, the US Army is exploring the use of the M982 Excalibur munition, a family of long-range precision projectiles. This paper aims to analyze the effectiveness of the M982 in comparison to the M795 and M549A1 projectiles to further the understanding of what this new asset contributes.

Based upon doctrinal scenarios for target destruction, a statistical analysis is performed using Monte Carlo simulation to identify a likely probability of kill ratio for the M982. A values-based hierarchical modeling approach is then used to differentiate the M982 from similar-type projectiles quantitatively in terms of several different attributes. Finally, sensitivity analyzes are presented for each of the value attributes, to identify areas where measures may lack robustness in precision.

Based upon a set of seven value measures, such as maximum range, effective range, the expected number of rounds to destroy a target, and the unit cost of a munition, the M982 1a-2 was found to be best suited for engaging point and small area targets. It is noted, however, that the M795 and M549A1 projectiles are likely better munition options for large area targets. Hence, an integrated targeting plan may best optimize the force’s weapon systems against a near-peer adversary.

The findings provide initial evidence that doctrinal adjustments in how the Army uses its artillery systems may be beneficial in facing near-peer adversaries. In addition, the values-based modeling approach offered in this research provides a framework for which similar technological advances may be examined.

In addressing the future trajectory of knowledge management systems, this paper uses the psycho-social notion of generativity which recently stimulated contributions in technology and innovation for a holistic systemic knowledge management (KM) review. The purpose of this study is to identify current shortcomings and fixations together with their ramifying affordances, all enveloped within a novel KM concept and prototype-system-under-development.

It follows up on prior publications using design science research (DSR) methodologies in compliance with theory effectiveness, a principle expecting system designs to be purposeful in terms of utility and communication. The KM perspective taken prioritizes a decentralizing agenda benefiting knowledge workers while also aiming to foster a fruitful co-evolution with traditional organizational KM approaches.

The notions of generative fit and capacities in their technical, informational and social interpretations prove able to accommodate diverse KM models and to cumulatively synthesize a wide range of related concepts and perspectives. In the process, Nonaka’s renowned socialize, externalize, combine, internalize and Ba model is repurposed and extended to suggest a corresponding complementing seize, imbed, collate, encompass, effectuate workflow embedded in distinct digital ecosystems fully aligned to the diversity of the generative attributes introduced.

Although the prototype development is still in progress, the study conforms to the DSR practice to report on early visions of technology impact on users, organizations and society and also refers to and reflects on aspects of feasibility, suitability, acceptability and the system’s prospect as a general-purpose technology or disruptive innovation.

The paper transdisciplinarily integrates the well-established psychological notions of generativity into its newer digital and systemic KM dimensions. The resulting new insights transparently inform the concept and prototype design, present a holistic framework for individuals and organizations and suggest avenues for new KM applications and KM research directions inspired by the adopted and adapted novel generativity contexts.

An optimal solution method based on 2-norm is proposed in this study to solve the inverse kinematics multiple-solution problem caused by a high redundancy. The current research also presents a motion optimization based on the 2-Norm of high-redundant mobile humanoid robots, in which a kinematic model is designed through the entire modeling.

The current study designs a highly redundant humanoid mobile robot with a differential mobile platform. The high-redundancy mobile humanoid robot consists of three modular parts (differential driving platform with two degrees of freedom (DOF), namely, left and right arms with seven DOF, respectively) and has total of 14 DOFs. Given the high redundancy of humanoid mobile robot, a kinematic model is designed through the entire modeling and an optimal solution extraction method based on 2-norm is proposed to solve the inverse kinematics multiple solutions problem. That is, the 2-norm of the angle difference before and after rotation is used as the shortest stroke index to select the optimal solution. The optimal solution of the inverse kinematics equation in the step is obtained by solving the minimum value of the objective function of a step. Through the step-by-step cycle in the entire tracking process, the kinematic optimization of the highly redundant humanoid robot in the entire tracking process is realized.

Compared with the before and after motion optimizations based on the 2-norm algorithm of the robot, its motion after optimization shows minimal fluctuation, improved smoothness, limited energy consumption and short path during the entire mobile tracking and operating process.

In this paper, the whole kinematics model of the highly redundant humanoid mobile robot is established and its motion is optimized based on 2-norm, which provides a theoretical basis for the follow-up research of the service robot.

In this paper, the whole kinematics model of the highly redundant humanoid mobile robot is established and its motion is optimized based on 2-norm, which provides a theoretical basis for the follow-up research of the service robot.

In this paper, the whole kinematics model of the highly redundant humanoid mobile robot is established and its motion is optimized based on 2-norm, which provides a theoretical basis for the follow-up research of the service robot.

Motion optimization based on the 2-norm of a highly redundant humanoid mobile robot with the entire modeling is performed on the basis of the entire modeling. This motion optimization can make the highly redundant humanoid mobile robot’s motion path considerably short, minimize energy loss and shorten time. These researches provide a theoretical basis for the follow-up research of the service robot, including tracking and operating target, etc. Finally, the motion optimization algorithm is verified by the tracking and operating behaviors of the robot and an example.