Search results

The purpose of this paper is to design a multifingered dexterous hand grasping planning method that can efficiently perform grasping tasks on multiple dexterous hand platforms.

The grasping process is divided into two stages: offline and online. In the offline stage, the grasping solution form is improved based on the forward kinematic model of the dexterous hand. A comprehensive evaluation method of grasping quality is designed to obtain the optimal grasping solution offline data set. In the online stage, a safe and efficient selection strategy of the optimal grasping solution is proposed, which can quickly obtain the optimal grasping solution without collision.

The experiments verified that the method can be applied to different multifingered dexterous hands, and the average grasping success rate for objects with different structures is 91.7%, indicating a good grasping effect.

Using a forward kinematic model to generate initial grasping points can improve the generality of grasping planning methods and the quality of initial grasping solutions. The offline data set of optimized grasping solutions can be generated faster by the comprehensive evaluation method of grasping quality. Through the simple and fast obstacle avoidance strategy, the safe optimal grasping solution can be quickly obtained when performing a grasping task. The proposed method can be applied to automatic assembly scenarios where the end effector is a multifingered dexterous hand, which provides a technical solution for the promotion of multifingered dexterous hands in industrial scenarios.

This study aims to introduce a multi-configuration, three-finger dexterous hand with integrated high-dimensional sensors and provides an analysis of its design, modeling and kinematics.

A mechanical design scheme of the three-finger dexterous hand with a reconfigurable palm is proposed based on the existing research on dexterous hands. The reconfigurable palm design enables the dexterous hand to achieve four grasping modes to adapt to multiple grasping tasks. To further enhance perception, two six-axis force and torque sensors are integrated into each finger. The forward and inverse kinematics equations of the dexterous hand are derived using the D-H method for kinematics modeling, thus providing a theoretical model for index analysis. The performance is evaluated using three widely applied indicators: workspace, interactivity of fingers and manipulability.

The results of kinematics analysis show that the proposed hand has excellent dexterity. Additionally, three different experiments are conducted based on the proposed hand. The performance of the dexterous hand is also verified by fingertip force, motion accuracy test, grasping and in-hand manipulation experiments based on Feix taxonomy. The results show that the dexterous hand has good grasping ability, reproducing 82% of the natural movement of the human hand in daily grasping activities and achieving in-hand manipulations such as translation and rotation.

A novel three-finger dexterous hand with multi-configuration and integrated high-dimensional sensors is proposed. It performs better than the previously designed dexterous hand in actual experiments and kinematic performance analysis.

Multi-sensor fusion in robotic dexterous hands is a hot research field. However, there is little research on multi-sensor fusion rules. This study aims to introduce a multi-sensor fusion algorithm using a motor force sensor, film pressure sensor, temperature sensor and angle sensor, which can form a consistent interpretation of grasp stability by sensor fusion without multi-dimensional force/torque sensors.

This algorithm is based on the three-finger force balance theorem, which provides a judgment method for the unknown force direction. Moreover, the Monte Carlo method calculates the grasping ability and judges the grasping stability under a certain confidence interval using probability and statistics. Based on three fingers, the situation of four- and five-fingered dexterous hand has been expanded. Moreover, an experimental platform was built using dexterous hands, and a grasping experiment was conducted to confirm the proposed algorithm. The grasping experiment uses three fingers and five fingers to grasp different objects, use the introduced method to judge the grasping stability and calculate the accuracy of the judgment according to the actual grasping situation.

The multi-sensor fusion algorithms are universal and can perform multi-sensor fusion for multi-finger rigid, flexible and rigid-soft coupled dexterous hands. The three-finger balance theorem and Monte Carlo method can better replace the discrimination method using multi-dimensional force/torque sensors.

A new multi-sensor fusion algorithm is proposed and verified. According to the experiments, the accuracy of grasping judgment is more than 85%, which proves that the method is feasible.

This paper aims to propose a novel method based on a gesture primitives analysis of human daily grasping tasks for designing dexterous hands with various grasping and in-hand manipulation abilities, which simplifies the complex and redundant humanoid five-finger hand system.

First, the authors developed the fingers and the joint configuration with a series of gesture primitives configurations and the modular virtual finger scheme, refined from the daily work gesture library by principal component analysis. Then, the authors optimized the joint degree-of-freedom configuration with the bionic design analysis of the anatomy, and the authors optimized the dexterity workspace. Furthermore, the adaptive fingertip and routing structure were designed based on the dexterous manipulation theory. Finally, the effectiveness of the design method was experimentally validated.

A novel lightweight three-finger and nine-degree-of-freedom dexterous hand with force/position perception was designed. The proposed routing structure was shown to have the capability of mapping the relationship between the joint space and actuator space. The adaptive fingertip with an embedded force sensor can effectively increase the robustness of the grasping operation. Moreover, the dexterous hand can grasp various objects in different configurations and perform in-hand manipulation dexterously.

The dexterous hand design developed in this study is less complex and performs better in dexterous manipulation than previous designs.

The purpose of this study is to develop a robotic hand–arm system for on-orbit servicing missions at the Tiangong-2 (TG-2) Space Laboratory.

The hand–arm system is mainly composed of a lightweight arm, a dexterous hand, an electrical cabinet, a global camera, a hand–eye camera and some human–machine interfaces. The 6-DOF lightweight arm and the 15-DOF dexterous hand adopt the modular design philosophy that greatly reduces the design cycle and cost. To reduce the computational burden on the central controller and simplify system maintenance, an electrical system which has a hierarchical structure is introduced.

The prototypical operating experiments completed in TG-2 space laboratory demonstrate the performance of the hand–arm system and lay foundations for the future applications of space manipulators.

The main contributions of this paper are as follows a robotic hand–arm system which can perform on-orbit servicing missions such as grasping the electric drill, screwing the bolt, unscrewing J599 electrical connector has been developed; a variable time step motion plan method is proposed to adjust the trajectories of the lightweight arm to reduce or eliminate the collision force; and a dexterous hand uses the coordinated grasp control based on the object Cartesian stiffness to realize stable grasp. To solve the kinematic mapping from the cyber glove commands to the dexterous hand, a fingertip-position-based method is proposed to acquire precise solutions.

This study aims to introduce the DoraHand, and the basic capability and performance have been verified in this paper. Besides the idea of sharing modular design and sensor design, the authors want to deliver an affordable and practical dexterous hand to the research area to contribute to the robotic manipulation area.

This paper introduced the DoraHand, a novel scalable and practical modular dexterous hand, which, adopting modular finger and palm design, fully actuated joint and tactile sensors, can improve the dexterity for robotic manipulation and lower the complexity of maintenance. A series of experiments are delivered to verify the performance of the hand and sensor module.

The parameters of the DoraHand are verified and suitable for the research of robotics manipulation area, the sensing capability has been tested with the static experiment and the slip prediction algorithm. And, the advantage of modular design and extensible interface have been verified by the real application.

The authors continue improving the DoraHand and extend it to more different applications. The authors want to make the DoraHand as a basic research platform in the robotic manipulation area.

The DoraHand has been sent to more than ten different research institutes for different research applications. The authors continue working on this hand for better performance, easier usage and more affordability.

This kind of dexterous hand can help researchers get rid of complex physical issues and pay more attention to the algorithm part; it can help to make robotic manipulation work more popular.

The key design in the DoraHand is the modular finger and sensing module. With the special design in mechanical and electrical parts, the authors build reliable hardware and can support the diversity requirement in the robotic manipulation area. The hand with tactile sensing capability can be used in more research and applications with its extensibility.

The aim of this paper is to enhance the control performance of dexterous hands, enabling them to handle the high data flow from multiple sensors and to meet the deployment requirements of deep learning methods on dexterous hands.

A distributed control architecture was designed, comprising embedded motion control subsystems and a host control subsystem built on ROS. The design of embedded controller state machines and clock synchronization algorithms ensured the stable operation of the entire distributed control system.

Experiments demonstrate that the entire system can operate stably at 1KHz. Additionally, the host can accomplish learning-based estimates of contact position and force.

This distributed architecture provides foundational support for the large-scale application of machine learning algorithms on dexterous hands. Dexterity hands utilizing this architecture can be easily integrated with robotic arms.

This paper aims to design a novel jaw gripper with human-sized anthropomorphic features to be suitable for precise in-hand posture transitions, such as twisting and re-positioning. The growing demand from traditional high-mix low-volume and new massive customized manufacturing industry requires the robot with configurability and flexibility. In the electronic manufacturing industry particularly, the design of the robotic hand with sufficient dexterity and configuration is important for the robot to accomplish the assembly task reliably and robustly. It is important for the robot to be able to grasp and manipulate a large number of assembly parts or tools.

In this research, a novel jaw-like gripper with human-sized anthropomorphic features is designed for online in-hand precise positioning and twisting. It retains the simplicity feature of traditional industrial grippers and dexterity features of dexterous robotic hands.

The gripper is able to apply suitable gripping force on assembly parts and performs reliable twisting movement within limited time to meet the industrial requirements. Manipulating several cylindrical assembly parts by robot, as an experimental case in this paper, is studied to evaluate its performance. The effectiveness of proposed gripper design and mechanical analysis is proved by the simulation and experimental results.

The main originality of this research is that a novel jaw gripper with human-sized anthropomorphic features is designed to be suitable for precise in-hand posture transitions, such as twisting and re-positioning. With this gripper, the robotic system will be sufficiently flexible to deal with various assembly tasks.

Presents both description and overview of the emerging field of biomechanical grippers and shows the prototype of biomechanical gripper called the Presov biomechanical robot gripper. Biomechanical robots and biomechanical grippers belong under biorobotics and bioengineering systems. Basic components of biorobotics include biomechanisms, biocontrol, biointelligence and biosensors. The Presov Biomechanical Robot Gripper is an electrically‐driven, multi‐fingered dextrous gripper, which has many features that conventional industrial robot grippers do not have. This gripper has been developed in the Department of Industrial Robotics of the Technical University in Presov, Slovak Republic.

This paper aims to propose a novel hand to bridge the gap between the traditional rigid robot hands and the soft hands to obtain a better grasping performance.

The proposed hand consists of three fingers. Each finger has 15 degrees of freedom and three phalanxes, which can bend in one direction when load is applied, but they are rigid toward the opposite direction at the initial position. The grasping process and simulations of the fingers are discussed in this paper. Both kinematic and dynamics analyses are performed to predict the performance of the hand. Subsequently, a prototype of the hand is developed for experiments.

Both kinematics and dynamics analyses indicate good grasping performance of the hand. Simulations and experiments confirm the feasibility of the finger design. The hand can execute hybrid grasping modes with more uniform force distribution and a larger workspace than traditional rigid fingers. The proposed hand has much potential in the industrial sector.

A new method to obtain better grasping performance and to bridge the gap between the rigid finger and the soft finger has been presented and verified. The hand combines the advantages of both the rigid phalanxes and the soft fingers. Compared with some traditional rigid fingers, the proposed design has a more uniform force distribution and a bigger workspace.