Search results

Examines the fifthteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

This study aims to propose a new methodology to develop bistable textile structures with two different states of heat and moisture transfer by taking inspiration from the animal kingdom. Bionic approaches controlling thermoregulation were analyzed, implemented at the textile level and evaluated. Therefore, 4D technology has been applied. This paper presents all the steps necessary for transferring bionic concepts on the textile level by using rapid prototyping and the 4D-textile approach.

Concepts for thermoregulation are derived from bionic approaches and are evaluated by the metrics of low cost and high adaptability to quickly changing needs. Subsequently, bionic approaches were implemented as prototypes by printing on a pre-stretched textile using an fused deposition modeling printer. The printed patterns and properties were investigated, and the effects of each parameter were evaluated. Finally, the prototypes were tested by comparing the data from the thermal imaging camera of the two bistable states.

This paper presents two printing pattern concepts for creating textiles with two different states of thermal and moisture transfer. The results show that bionic approaches for thermoregulation transferred to the textile level are possible and quickly put into practice through 3D-printing technology as a tool for rapid prototyping.

The presented methodology fills the technological gap for quickly transferring bionic approaches to the textile level using the 4D-Textile technology. In addition, the possibility of generating two bistable states with different thermophysiological properties in one textile and switching between them easily was shown.

This paper aims to prove the expediency and effectiveness of magnetic textiles use obtained by adding nanopowder synthesized on the basis of oxides of divalent and trivalent iron oxides, taking into account bacteriostatic, magnetotherapeutic and compressive properties.

The research includes methods of synthesis of nanoelements of bivalent and trivalent iron, methods of the theory of elasticity for determining the pressure between compression clothing and a limb, methods of creating an annular magnetic field with determination of its voltage, methods of determining the growth dynamics of mold bacteria and methods of approximation of experimental data.

On the base of the determination of the forces arising from the interaction of magnetic nanotextiles with a magnetic field, the expediency of using these materials in the creation of compression clothing has been proven. An additional medical value of magnetic textiles is the bacteriostatic effect. The content of magnetic nanoelements in the textile composition of 0.2% almost completely suppresses mold infections

Cotton samples with the addition of nanocomponents based on ferric and ferric oxides were studied.

Magnetotextile materials can be used in magnetotherapy, compression clothing, in textile products that provide bacteriostatic properties.

The use of magnetic textile materials is a perspective direction for the creation of medical textile products with complex properties.

The purpose of this paper is to analyze the corona discharge films (CDFs) taken from the fingertips of human subjects who had contact for a long period of time with two sets of clothes, in order to establish in what way a long period of contact with textiles influences life's parameters: the heart beat (HB), the blood pressure (BP), and the volunteers' level of comfort.

Three volunteers took part in the experiments. They were placing a fingertip in the area of a strong electrical field of high voltage (10 kV) and high frequency (1,024 Hz) to register a CDF. A digital camera placed within the area of corona discharges records this phenomenon.

The paper finds that there is no statistical difference between the parameters of a CDF taken from the fingertips of volunteers after 5 h of wearing two sets of clothes. There is a connection between the level of comfort of the volunteers and their CDF.

The CDF shows the consequence of the different factors, impact on human subjects. The authors are moderate in their opinion about the influence of extreme textiles‐related feelings.

This paper aims to develop the methodology for the imitation of exploitation conditions of textile products as well as to determine the exploitation peculiarities of high‐performance fabrics for outdoor clothing producible in Lithuania.

Static‐ and dynamic‐cyclic loading was applied for the imitation of exploitation conditions as well as for the investigation of the changes in specimen geometrical parameters.

The differences in the parameters of textile material stability determined under dry and wet cyclic specimen deformation were determined. The investigation results presented show that the parameters of air permeability can be used for the determination of changes in textile product shapes due to their cyclic washing as well as to the other kinds of wet technological treatment, especially in these cases when the small areas of product material are deformed.

The problems concerned with the methodology for the evaluation of exploitation stability of high‐performance fabrics (woven and knitted) for outdoor clothing are analyzed in this research.

In most cases, the exploitation behaviour of textile materials is investigated under uniaxial or static biaxial deformation. For better imitation of real exploitation conditions of textiles the new testing methodology based on two testing methods was established (original device for punch deformation working in creep mode as well as using wet and dry specimens; device ARRV for cyclic fatigue).

The purpose of this paper is to evaluate the influence of assembly type on the hand property of the polyester-knitted materials containing different amounts of elastane fibre.

The hand property of control textile materials specimens as well as assembled ones applying both adhesive bonding and sewing was evaluated analysing the typical pulling curves as well as the individual hand parameters, which were determined using the device KTU-Griff-Tester. The complex hand criterion Q was calculated for the complete assessment of both textiles and their assemblies’ hand by one numeral value.

It was shown that the fabric structure and assembly type have a significant influence on the knitted materials hand property. The complex hand criterion Q varied from 0.068 to 0.186, depending on the material structure, and it was decreased up to 42.6 per cent due to textile assemblies.

The determined research results are significant not only for clothing science but also leads to the improvement in clothing quality in fashion industry suggesting more ergonomic and original constructional decisions for clothes’ design, selection of most suitable assembly type and its place in overall garment area, which is very important for the development process of the slim fitted sportswear featuring with a very complicated construction, usually worn under intensive body movements causing rubbing effect to the skin.

Knitted fabrics should not only be elastic but also have perfect hand, thus making them to feel comfortable. But hand property of assembled textiles had not been investigated previously. Novelty and originality of this research was the objective and simple evaluation of the hand property for both knitted materials and their assemblies taking into account the overall skin sensorial comfort of a garment.

Present study aimed to nanosilver-treat some commercially dyed denim fabric using an eco-friendly cross-linker of citric acid for possible application in the fabrication of sustainable antibacterial and nontoxic surgical gowns.

The conventional untreated surgical gowns are prone to bacterial attack making them unprotective and infection carriers. Thereby, nanosilver finishing of the surgical-grade dyed denim fabric was achieved via citrate cross-linking under the pad-dry-cure method. The hence treated denim fabrics were characterized for surface chemical, crystalline, textile, color and antibacterial attributes using both conventional and advanced analytical approaches.

The results expressed that the prepared denim specimens contained surface roughness at the nanoscale besides some alterations in their textile and color parameters. Both textile and comfort properties of the finished fabric remained in the acceptable range with effective antibacterial activity.

The silver nano-finished dyed denim expressed broad-spectrum antibacterial activity and qualified as a potential substrate in the fabrication of surgical gowns. Such sustainable application of nanosilver finishing could be perused for industrial implications.

This study presents citric acid as a crosslinking agent to impregnate the commercially dyed denim fabric for potential application in the fabrication of surgical gowns. The application of nanosilver on prior citrated dyed-grown fabrics could be a novel approach. This study used approximately all the reagents and auxiliaries as bio-based to ensure the nontoxicity and sustainability of the resultant fabric.

Solar cells could make textile-based wearable systems energy independent without the need for battery replacement or recharging; however, their laundry resistance, which is prerequisite for the product acceptance of e-textiles, has been rarely examined. This paper aims to report a systematic study of the laundry durability of solar cells embedded in textiles.

This research included small commercial monocrystalline silicon solar cells which were encapsulated with functional synthetic textile materials using an industrially relevant textile lamination process and found them to reliably endure laundry washing (ISO 6330:2012). The energy harvesting capability of eight textile laminated solar cells was measured after 10–50 cycles of laundry at 40 °C and compared with light transmittance spectroscopy and visual inspection.

Five of the eight textile solar cell samples fully maintained their efficiency over the 50 laundry cycles, whereas the other three showed a 20%–27% decrease. The cells did not cause any visual damage to the fabric. The result indicates that the textile encapsulated solar cell module provides sufficient protection for the solar cells against water, washing agents and mechanical stress to endure repetitive domestic laundry.

This study used rigid monocrystalline silicon solar cells. Flexible amorphous silicon cells were excluded because of low durability in preliminary tests. Other types of solar cells were not tested.

A review of literature reveals the tendency of researchers to avoid standardized textile washing resistance testing. This study removes the most critical obstacle of textile integrated solar energy harvesting, the washing resistance.

Examines the tenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Examines the fourteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.