Search results

Devices for step estimation are body-worn devices used to compute steps taken and/or distance covered by the user. Even though textiles or clothing are foremost to come to mind in terms of articles meant to be worn, their prominence among devices and systems meant for cadence is overshadowed by electronic products such as accelerometers, wristbands and smart phones. Athletes and sports enthusiasts using knee sleeves should be able to track their performances and monitor workout progress without the need to carry other devices with no direct sport utility, such as wristbands and wearable accelerometers. The purpose of this study thus is to contribute to the broad area of wearable devices for cadence application by developing a cheap but effective and efficient stride measurement system based on a knee sleeve.

A textile strain sensor is designed by weft knitting silver-plated nylon yarn together with nylon DTY and covered elastic yarn using a 1 × 1 rib structure. The area occupied by the silver-plated yarn within the structure served as the strain sensor. It worked such that, upon being subjected to stress, the electrical resistance of the sensor increases and in turn, is restored when the stress is removed. The strip with the sensor is knitted separately and subsequently sewn to the knee sleeve. The knee sleeve is then connected to a custom-made signal acquisition and processing system. A volunteer was employed for a wearer trial.

Experimental results establish that the number of strides taken by the wearer can easily be correlated to the knee flexion and extension cycles of the wearer. The number of peaks computed by the signal acquisition and processing system is therefore counted to represent stride per minute. Therefore, the sensor is able to effectively count the number of strides taken by the user per minute. The coefficient of variation of over-ground test results yielded 0.03%, and stair climbing also obtained 0.14%, an indication of very high sensor repeatability.

The study was conducted using limited number of volunteers for the wearer trials.

By embedding textile piezoresistive sensors in some specific garments and or accessories, physical activity such as gait and its related data can be effectively measured.

To the best of our knowledge, this is the first application of piezoresistive sensing in the knee sleeve for stride estimation. Also, this study establishes that it is possible to attach (sew) already-knit textile strain sensors to apparel to effectuate smart functionality.

The objective of this study was to develop wearable suit platforms with various anchoring structure designs with the intention of improving wearability and enhancing user satisfaction.

This study selected fabrics and materials for the suit platform through material performance tests. Two anchoring structure designs, 11-type and X-type are compared with regular clothing under control conditions. To evaluate the comfort level of the wearable suit platform, a satisfaction survey and electroencephalogram (EEG) measurements are conducted to triangulate the findings.

The 11-type exhibited higher values in comfort indicators such as α, θ, α/High-β and lower values in concentration or stress indicators such as β, ϒ, sensorimotor rhythm (SMR)+Mid-β/θ, and a spectral edge frequency of 95% compared to the X-type while walking. The 11-type offers greater comfort and satisfaction compared to the X-type when lifting based on the EEG measurements and the participants survey.

It is recommended to implement the 11-type when designing wearable suit platforms. These findings offer essential data on wearability, which can guide the development of soft wearable robots.

Polyethylene terephthalate (PET) as a fiber molding polymer is widely used in aerospace, electrical and electronic, clothing and other fields. The purpose of this study is to improve the thermal insulation performance of polyethylene terephthalate (PET), the SiO₂ aerogel/PET composites slices and fibers were prepared, and the effects of the SiO₂ aerogel on the morphology, structure, crystallization property and thermal conductivity of the SiO₂ aerogel/PET composites slices and their fibers were systematically investigated.

The mass ratio of purified terephthalic acid and ethylene glycol was selected as 1:1.5, which was premixed with Sb₂O₃ and the corresponding mass of SiO₂ aerogel, and SiO₂ aerogel/PET composites were prepared by direct esterification and in-situ polymerization. The SiO₂ aerogel/PET composite fibers were prepared by melt-spinning method.

The results showed that the SiO₂ aerogel was uniformly dispersed in the PET matrix. The thermal insulation coefficient of PET was significantly reduced by the addition of SiO₂ aerogel, and the thermal conductivity of the 1.0 Wt.% SiO₂ aerogel/PET composites was reduced by 75.74 mW/(m · K) compared to the pure PET. The thermal conductivity of the 0.8 Wt.% SiO₂ aerogel/PET composite fiber was reduced by 46.06% compared to the pure PET fiber. The crystallinity and flame-retardant coefficient of the SiO₂ aerogel/PET composite fibers showed an increasing trend with the addition of SiO₂ aerogel.

The SiO₂ aerogel/PET composite slices and their fibers have good thermal insulation properties and exhibit good potential for application in the field of thermal insulation, such as warm clothes. In today’s society where the energy crisis is becoming increasingly serious, improving the thermal insulation performance of PET to reduce energy loss will be of great significance to alleviate the energy crisis.

In this study, SiO₂ aerogel/PET composite slices and their fibers were prepared by an in situ polymerization process, which solved the problem of difficult dispersion of nanoparticles in the matrix and the thermal conductivity of PET significantly reduced.

Technology and market pressures are encouraging localized and small-series production in customer-driven industries. The purpose of this paper is to explore and understand the supply chain-, product- and process-design factors for small-series production in EU’s textile and apparel industry, to understand configuration decisions, priorities and challenges.

An interview study was undertaken with ten companies that represent diverse small-series production models and value chain roles. Interview data was analysed to identify supply network configuration characteristics, decision priorities and challenges.

Three small-series production models emerged from the analysis, differing with respect to adoption of process postponement and customization. The findings confirm and extend past research regarding diverse decision priorities and product, process, supply chain structure/relationship configurations. Challenges identified relate to planning (priorities) and implementation (configuration). Whereas competence availability and digital technology challenges are common, several difficulties are linked to production model like tensions related to priorities and small volumes, which are not found with customization.

Future research can make comparisons with other industry and location contexts; adopt dynamic approaches to distinguish between design and reconfiguration processes; and address indicated paradoxical-tensions.

The study findings can provide guidance for companies regarding identification of priorities and management of (planning/implementation) challenges impacting small-series production in T&A.

The paper brings a configuration perspective at the supply chain level to the problem of small-series production implementation, which demands holistic and context-specific understanding.

3D printing has been warmly welcomed by clothing enterprises for its customization capacity in recent years. However, such clothing enterprises have to face the digital transformation challenges brought by 3D printing. Since the business model is a competitive weapon for modern enterprises, there is a research gap between business model innovation and digital transformation challenges for 3D-printing garment enterprises. The aim of the paper is to innovate a new business model for 3D-printing garment enterprises in digital transformation.

A business model innovation canvas (BMIC), a new method for business model innovation, is used to innovate a new 3D-printing clothing enterprises business model in the context of digital transformation. The business model canvas (BMC) method is adopted to illustrate the new business model. The business model ecosystem is used to design the operating architecture and mechanism of the new business model.

First, 3D-printing clothing enterprises are facing digital transformation, and they urgently need to innovate new business models. Second, mass customization and distributed manufacturing are important ways of solving the business model problems faced by 3D-printing clothing enterprises in the process of digital transformation. Third, BMIC has proven to be an effective tool for business model innovation.

The new mass deep customization-distributed manufacturing (MDC-DM) business model is universal. As such, it can provide an important theoretical reference for other scholars to study similar problems. The digital transformation background is taken into account in the process of business model innovation. Therefore, this is the first hybrid research that has been focused on 3D printing, garment enterprises, digital transformation and business model innovation. On the other hand, business model innovation is a type of exploratory research, which means that the MDC-DM business model’s application effect cannot be immediately observed and requires further verification in the future.

The new business model MDC-DM is not only applicable to 3D-printing garment enterprises but also to some other enterprises that are either using or will use 3D printing to enhance their core competitiveness.

A new business model, MDC-DM, is created through BMIC, which allows 3D-printing garment enterprises to meet the challenges of digital transformation. In addition, the original canvas of the MDC-DM business model is designed using BMC. Moreover, the ecosystem of the MDC-DM business model is constructed, and its operation mechanisms are comprehensively designed.

This study seeks to explore the importance of digital platforms in restoring global supply chains interrupted by the coronavirus pandemic. Specifically, the research focuses on internally developed digital platforms and their potential to ensure supply chain continuity between developed and emerging markets.

Multiple comparative case studies have been selected for the research methodology. Eight cases concerning digital platform implementation for global SC management – four from developed countries and four from emerging markets – have been selected. The four pairs of cases represent four global supply chain mechanisms.

The results revealed that the use of internally developed digital platforms serves as a quick solution for immediate problems caused by ripple effects in global supply chain and negative environmental conditions. Digital platforms could therefore facilitate reciprocal monitoring and information exchanges between SC partners in different countries.

The digital platform research stream is in its early stages. Research thus far has mostly focused on externally developed digital platforms managed by an orchestrator. The platforms' usefulness in the dialogue between developed and emerging markets requires further exploration.

The focus of this paper is to provide an assessment of the impact of imports from China on Indian manufacturing and capture the multifarious dimensions of India–China bilateral trade flows. By examining the comparative disadvantage imports (RCA<1), the paper critically examines their significance on India's industry output and performance and underlines factors beyond trade competitiveness.

For examining the impact of India's manufacturing imports from China on industry performance, four stages of analysis is adopted. First, the imports with RCA <1 have been identified. For these, BRCA was also computed. Second, trends in industry performance associated with high imports from China. Third, for estimating the impact of imports on industry output, augmented production function was specified and estimated with imports from China as a potential determinant. And fourth, comparison of industry performance between India and China.

The impact of imports from China on industry output is positive and significant. A 1% increase/decrease in the share of China in world imports will result in output increasing by 0.31%. The rise in imports from China seems to be on account of non-availability of necessary intermediate and capital goods domestically, thereby making these imports critical and complementary for production. This negates the threat perception of imports from China.

The paper recognizes the need for understanding the firm heterogeneity in import decisions and R&D intensity of imports. Across industries, the drivers for firms' decisions to import are “learning by importing’ and “self-selection” (Camino-Magro et al., 2020). Also, another important dimension at the firm-level analysis is the elasticity of substitution between foreign and domestic inputs. If the elasticity of substitution is low then high import barriers will lead to reduction of domestic output. These firm-level issues are important for effective policy interventions.

One, the inward looking focus of the industry which is exhibited in low export intensity will not provide the necessary impetus to propel the manufacturing sector to a higher technology frontier and translate the productivity gains to export competitiveness. Two, unless the domestic manufacturing is propelled from the current low/medium technology to high technology products, the current policy thrust on “self-reliance” cannot be realized.

Analysis is based on manufacturing imports with RCA<1 from China thereby underlining factors beyond trade competitiveness not covered by RCA methodology. Complementing the quantitative analysis with economic policy developments in China and India and contrasting the same has provided insights into the real factors determining India–China bilateral trade.

The circular economy (CE) represents an industry-wide transition from linear to circular processes. There has been a proliferation of literature on CE in the last decade. However, the existing studies on the adaption of CE in small and medium-sized enterprises (SMEs) are scarce. This study aims to develop a research agenda and the way forward for future researchers focusing on the adoption of CE.

This article analyses the CE concepts through a Systematic Literature Review (SLR). Coding and content analysis are performed to generate emergent themes with the help of “Atlas.ti” software.

The authors uncovered the contemporary significance of adopting CE and the state-of-the-art literature on CE. The study's findings fall into four broad themes: Technical know-how, resource and process optimization, reverse practices and technology and innovation. Ten thought-provoking questions were identified in the four themes that researchers can explore further in embracing CE to achieve sustainability in SMEs.

The study has highlighted the importance of CE adoption and CE's benefits to stakeholders across all three dimensions, i.e. social, economic and ecological. Practitioners can use the agenda in four themes to strengthen the practitioners' existing practices in SMEs to promote CE.

The study's uniqueness is the supply of current knowledge from diverse literature and practical consequences for SMEs. This study opens new lines of inquiry to adopt CE in SMEs, streamlining the existing literature into four themes to focus future research.

This study examines handmade clothing consumption as a means of self-expression by exploring the interrelationships between consumers' self-expression, brand love and word of mouth.

Using a descriptive research design, data were collected from 295 respondents in South Africa who posted about fashion on social media and who had bought handmade clothing in the 6 months prior to data collection. Structural equation modelling was used to examine the interrelationships between consumers' self-expression, brand love and word of mouth.

Brand love intervenes between consumers' self-brand connections and word of mouth about handmade clothing. More specifically, brand love strengthens positive word of mouth online and mitigates negative word-of-mouth intentions following a handmade clothing product failure scenario.

The study enlightens scholarly understanding of consumers' self-expression motivations for using ready-made handmade clothing that results in brand love and positive word of mouth.

Handmade clothing marketers who tap into consumers' self-expression and who can establish brand love among consumers can similarly create beneficial consumer–brand relationships.

Consumers often use handmade clothing for the purpose of self-expression, which provides subsequent spin-offs for brands in the form of brand love and positive word of mouth. Objective self-awareness theory provides a parsimonious lens to reveal the important role that brand love plays as a mechanism to explain the linkage of consumers' self-brand connections to word of mouth about handmade clothing.

The objective of this study is to investigate how the coronavirus disease 2019 (COVID-19) pandemic affects firms' financial management in China's manufacturing sector. In addition, the authors analyze the changes in various financial indicators before and during the COVID-19 pandemic. Further, the authors make a cross-country comparison of the COVID-19's impact on financial management between China and Romania.

The study uses the balanced panel data of 2,272 manufacturing listed companies from 2019 to 2020, and applies the t-test method and multiple regression method.

The results show that firms' financial performance in most manufacturing sub-sectors decreased during the observed period. In addition, the authors find that equity financing, proper liquidity management and an expanded firm scale can improve firms' financial performance. The authors further compare the results with the Romanian results, and find that the negative impact of debt-to-equity ratio on firms' financial performance in Romania is greater than that in China and the positive impact of financial autonomy ratio and working capital ratios is greater in China than that in Romania.

The findings can help corporate managers make the best financial management decision in response to crisis.

This study is one of the pioneers that analyze how manufacturing companies carried out their financial management during the COVID-19 crisis in the Chinese context, and provides a cross-country analysis of corporate financial management practices in China and Romania.