Search results

This paper aims to investigate the relationship between employee training and bank risk to verify whether and to what extent an increase in employee training, as a soft component of total quality management (TQM), affects bank risk.

The research adopts a panel regression, based on a unique dataset of a sample of Italian banks over the period 2011–2018, to test whether employee training affects bank risk, measured alternatively in terms of Z-score, a proxy of bank stability and non-performing loans (NPLs)/gross loans ratio as a proxy of credit risk.

Research findings reveal that increasing employee training leads to growing bank stability. In contrast, credit risk is not affected by employee training. However, by investigating training heterogeneity, this study found that the increase in the number of managerial training hours, as a proxy for soft skills training, negatively impacts credit risk. Therefore, an increase in soft skills leads to a reduction in bank credit risk.

This study provides empirical evidence in support of the relationship between employee training and bank risk, which seems novel in the literature. From a managerial point of view, this study highlights the need for banks to pay attention to the skills, particularly soft skills, that banks' employees must possess to effectively manage bank risk and, more specifically, the core bank risk.

Empirical evidence on the relationship between employee training, soft/hard skills and bank risk appears limited if not absent. Therefore, the findings provide insights for a more nuanced interpretation of variables that affect bank risk.

Transfer motivation has been identified as a pivotal factor influencing transfer of training. However, the role of training content has often been overlooked as explanatory variable for the rate of transfer motivation. This study aims to examine to what extent experiences in transfer motivation and its personal and contextual antecedents depend on whether the training content is soft or hard skill. To this end, this study used the perspective of the unified model of task-specific motivation.

A total of 1,122 trainees (462 soft skill and 660 hard skill) filled out a questionnaire representing the components of transfer motivation and its personal- and contextual antecedents. Data were analyzed by means of multi group structural equation modeling.

The results showed mean differences between soft- and hard-skill trainings in personal- and contextual antecedents of transfer motivation and for different types of transfer motivation. However, no differences in transfer intention were found.

The outcomes provide insight as to what practitioners and trainers could do in training design and work environments to raise personal and contextual antecedents and to what extent a differentiation should be made between soft- and hard-skill trainings. This can eventually help them in raising transfer motivation among trainees.

To the best of the authors’ knowledge, this study is the first that examines whether experiences in personal and contextual antecedents of transfer motivation, transfer motivation and transfer intention differ for trainings consisting of different characteristics.

Companies are increasingly implementing business process management systems (BPMSs) to support their processes. However, there is a gap in the literature regarding whether users also use BPMSs to manage the knowledge needed for processes to be completed. This study aims to analyze the factors that cause users to use BPMSs to manage the knowledge required in business processes.

The paper proposes an original model that integrates two successful information system models applied to BPMSs and knowledge management systems. To test the hypotheses derived from this new model, data were collected from 242 mature BPMS users from 12 Spanish and Latin American companies. Structural equation modeling with AMOS was used to examine the model.

Users’ perceived usefulness of a BPMS when using it for knowledge management (KM) is the only factor influencing them to use it for KM.

This study has practical implications for managers wishing to successfully implement a BPMS to support processes and for employees to use the knowledge embedded in the tool. The latter will only happen if users perceive the tool’s usefulness for KM.

To the best of the authors’ knowledge, this model is the first empirically validated model to successfully analyze BPMS users’ tendency to use BPMSs as a tool to support necessary KM in processes.

Railways are a well-known example of complex critical infrastructure, incorporating socio-technical systems with humans such as drivers, signallers, maintainers and passengers at the core. The technological evolution including interconnectedness and new ways of interaction lead to new security and safety risks that can be realised, both in terms of human error, and malicious and non-malicious behaviour. This study aims to identify the human factors (HF) and cyber-security risks relating to the role of signallers on the railways and explores strategies for the improvement of “Digital Resilience” – for the concept of a resilient railway.

Overall, 26 interviews were conducted with 21 participants from industry and academia.

The results showed that due to increased automation, both cyber-related threats and human error can impact signallers’ day-to-day operations – directly or indirectly (e.g. workload and safety-critical communications) – which could disrupt the railway services and potentially lead to safety-related catastrophic consequences. This study identifies cyber-related problems, including external threats; engineers not considering the human element in designs when specifying security controls; lack of security awareness among the rail industry; training gaps; organisational issues; and many unknown “unknowns”.

The authors discuss socio-technical principles through a hexagonal socio-technical framework and training needs analysis to mitigate against cyber-security issues and identify the predictive training needs of the signallers. This is supported by a systematic approach which considers both, safety and security factors, rather than waiting to learn from a cyber-attack retrospectively.

There is a global concern about the effectiveness of vocational education and training (VET) programmes in developing job-related skills and competencies for real-world environments for disadvantaged and unemployed youths. Experiential learning (EL) is a major component of VET programmes. This article aims to examine the effects of facilitating VET through EL theory to promote youths' skills acquisition. The study looks at the effects of material resources on the use of experiential learning theory (ELT), the types of EL and the contribution of ELT to VET programmes.

The research design mainly entails a qualitative research design and research method to allow the researcher to view the reality as is experienced from the inside out by the trainees and training centre managers on important data for a thorough understanding. The study participants were 512 young trainees who completed different training courses from the VET programmes and 24 centre managers in the KwaZulu-Natal province of South Africa.

The findings reveal that the use of ELT in VET programmes helped the trainees to gain real-world skills, hence contributing to their empowerment in terms of work experience and competence for their future employment. Based on the findings, the study concludes that ELT is an effective instrument to promote VET programmes for disadvantaged and unemployed youths.

The practical and social implications of the findings are that, while disadvantaged youths cannot access and afford higher education, public and private sectors can remedy their situation by providing non-school-based technical and vocational training to help such youths enter the labour market. The findings will motivate the providers of skills development for unemployed youths to use ELT in designing course curricula, planning resources and directing teaching-learning approaches to help trainees to acquire skills and competencies to perform tasks close to real-work situations.

The socio-economic implication of the article is that skills development plays an important role in poverty reduction. Investing in the skills development of citizens is vital to raise the incomes of poor groups and to reduce poverty (ILO, 2018). Although the causes of unemployment have also to do with economic factors in a country, skills development is an essential ingredient in developing capacities for labour market entry and increased income generation of a vulnerable group of people.

The article is significant because the study provides new insights into the use of ELT in VET programmes to improve their effectiveness in developing job-related skills and competencies for real-world environments for disadvantaged and unemployed youths. The study contributes to the body of knowledge by establishing a solid base for the evidence-informed practice of the effects of facilitating the VET programme through ELT to promote skills acquisition for the employment of unemployed and disadvantaged youths.

The purpose of this paper is to explore the scope for action of local human resource managers, who are employed in foreign subsidiaries of multinational companies (MNCs), for implementing training activities. These managers are situated in relationships to headquarters and the local environment. Related to this is the question whether MNCs contribute to the local skill base by implementing training activities or whether they exploit the existing skill formation system.

This study focusses on German subsidiaries of MNCs with headquarters in the USA and the UK, France, China and Japan. The study is based on 107 expert interviews with subsidiary managers and representatives of local stakeholder organisations, such as educational organisations, chambers, economic promotion agencies and governmental bodies in Germany.

The study reveals that headquarters introduce general schemes for training. In addition to these MNC-internal trainings, local managers use their information advantage over headquarters to implement dual training activities.

The training activities of subsidiaries are dependent on the institutional settings of the host country.

Albeit dual training activities are laborious and tie the local managers down for the medium and long term, the future need of the subsidiary for adequately skilled workforce prompts local managers’ engagement in implementing dual training activities.

Subsidiaries contribute to the local skill base and do not act in a free-rider position, at least in the German variety of capitalism.

The study deepens insights on distanced relations within and how subsidiaries generate scope for action by using this kind of relationships.

Increasing demand on rail transport speeds up the introduction of new technical systems to optimize the rail traffic and increase competitiveness. Remote control of trains is seen as a potential layer of resilience in railway operations. It allows for operating and controlling automated trains and communicating and coordinating with other stakeholders of the railway system. This paper aims to present the first results of a multi-phased simulator study on the development and optimization of remote train driving concepts from the operators’ point of view.

The presented concept was developed by benchmarking good practices. Two phases of iterative user tests were conducted to evaluate the user experience and preferences of the developed human-machine-interface concept. Basic training requirements were identified and evaluated.

Results indicate positive feedback on the overall system as a fallback solution. HMI elicited positive emotions regarding pleasure and dominance, but low arousal levels. Train drivers had more conservative views on the system compared to signalers and students. The training activities achieved increased awareness and understanding of the system for future operators. Inclusion of potential users in the development of future systems has the potential to improve user acceptance. The iterative user experiments were useful in obtaining some of the needs and preferences of different user groups.

Multi-phase user tests were conducted to identify and to evaluate the requirements and preferences of remote operators using a simplified HMI. Training analysis provides important aspects to consider for the training of future users.

This study examines the case of an initial training, called “Dojo”, invented and implemented at a production site in the Czech Republic. It clarifies the initial training program implementation process and offers a conceptual framework for cooperative management of subsidiary activities at the site and firm.

This study conducts an in-depth analysis of qualitative data from the Czech production site over a five-year period. The theoretical base is the theorization and labeling phase of management innovation (MI), the final phase of which legitimizes a new management practice. Interview data, archival data, pictures and financial data are used for the analysis.

To legitimize the Dojo in the operational flow controlled by the site and firm, the Czech production site acquires validation of the Dojo from employees and board members of the Japanese and European headquarters, helping the site build trustful relationships with them. Training programs, process standardization and skills standardization of the workers offer benefits to the trainees, production site and firm.

The authors offer theoretical insights into MI at the subsidiary-level, which past studies have not differentiated at the firm-level. The authors also provide details of the implementation and management of initial training for newly hired blue-collar workers at the production site. The findings complement related literature on human resource management and operational management.

Studies show that building information modelling (BIM) technology can improve construction productivity regarding the design, construction and maintenance of a project life cycle in the 21st century. Revit has been identified as a frequently used tool for delivering BIM in the built environment. Studies about BIM technology via Revit are scarce in training middle-level workforce higher education institutions. Thus, this study aims to investigate the relevance of BIM technology and offer measures to promote digitalisation in Nigeria’s built environment polytechnic undergraduates via Revit.

Given the unexplored nature of training the middle-level workforce in Nigeria, 37 semi-structured virtual interviews were conducted across Nigeria, and saturation was achieved. The participants were knowledgeable about construction-related BIM. The researchers used a thematic analysis for the collected data and honed them with secondary sources.

Improved visualisation of design, effective and efficient work productivity, automatic design and quantification, improved database management and collaboration and data storage in the centrally coordinated model, among others, emerged as BIM’s benefits. BIM technology via Revit is challenging, especially in Nigeria’s polytechnic education curriculum. The 24 perceived issues were grouped into government/regulatory agencies-related, polytechnic management-related and polytechnic undergraduate students-related hindrances in Nigeria’s built environment.

This study is limited to BIM implications for Nigeria’s built environment polytechnic undergraduates.

This study contributes to the literature paucity in attempting to uncover perceived issues hindering the implementation of BIM technology via Revit in training Nigeria’s built environment polytechnic undergraduates via a qualitative approach.

Knowing the students' readiness for the fourth industrial revolution (4IR) is essential to producing competent, knowledgeable and skilled graduates who can contribute to the skilled workforce in the country. This will assist the Higher Education Institutions (HEIs) to ensure that their graduates own skill sets needed to work in the 4IR era. However, studies on students' readiness and preparedness for the 4IR in developing countries such as the Sultanate of Oman are still lacking. Therefore, this study investigates students' readiness level and preparedness for the 4IR. The findings of this study will benefit the HEIs policymakers, administration, faculties, departments, industries and society at large since they will be informed of the student's readiness and preparedness toward industry 4.0.

The authors adopted the measures from the same context as previous studies in this study. The questionnaire was divided into three sections; the first part described the purpose and introduction of the search with the surety to keep the data confidential. The second part consisted of demographical information like gender, education. The last parts consisted of four subsections, question items in these parts are based on the related previous study. Characteristics consisted of 14 items, knowledge consisted of 18 items related to 4IR technologies, Organizational Dimension comprised of four items related to academic programs, curriculum and training. Preparedness contained two items. The participants have rated all the items in 5-Likert scale.

Results from structural equation modeling showed that students' characteristics, knowledge of 4IR technologies and organizational dimensions significantly impact their preparedness for the 4IR. The study also found that organizational dimensions have the highest impact on students' preparedness. Furthermore, the organizational dimension significantly influences students' knowledge of 4IR technology. Moreover, students' characteristics related to 4IR are significantly affected by their knowledge of 4IR technology and organizational dimension. The findings suggest that HEIs are responsible for increasing the adoption of 4IR, and therefore organizational dimensions such as the academic programs, training, technological infrastructure and others are all critical for preparing students for a better future and should be given a priority.

This study has used academic programs and training to measure the organizational dimension. However, other important factors should be considered, such as technological infrastructure and leadership and governance of HEIs. Second, the current research depends on quantitative data, so future research should implement a mixed methodology (questionnaires, depth interviews, document analysis and focus group) to understand the factors affecting students' readiness for 4IR clearly. Finally, although the 4IR has numerous benefits, it also has challenges in its implementation, so future studies should focus on challenges encountered by different stakeholders in implementing 4IR-related technologies.

The curriculum must include mandatory courses related to IT infrastructure design, user experience programming, electronic measurement and control principles, and programming for data science. HEIs should also foster interdisciplinary knowledge by integrating IT, Engineering, Business and Sciences. Furthermore, the HEIs should develop their infrastructure to have smart campuses, labs, classrooms and libraries to make HEIs a space where knowledge can be generated and innovative solutions can be proposed. This entails HEIs offering necessary hardware, software and technical support because if the HEIs improve their technological resources, students will be capable of using 4IR-related technologies effectively.

The advancement of technology has resulted in the emergence of the Fourth Industrial Revolution (4IR), such as artificial intelligence, blockchain, robotics, cloud computing, data science, virtual reality and 3D printing. It is essential to investigate students' readiness for 4IR. However, there is no study as per researchers' knowledge talked about students readiness in HEIs in the Arab world. This study could be a basis for more research on students' perception of the 4IR covering students from various backgrounds and levels.