Search results

This research aimed to determine the differences and similarities in each pilot project to understand the primary design forms and concepts of sponge city concept (SCC) projects in China. It also aimed to examine ten pilot projects in Shanghai to extrapolate their main characteristics and the processes necessary for implementing SCC projects effectively.

A literature review and field survey case study were employed. Data were mostly collected through a field survey in Shanghai, focusing on both the projects and the surrounding environment. Based on these projects' examination, a comparative method was used to determine the characteristics of the ten pilot SCC projects and programs in Shanghai.

Six main types of SCC projects among 30 pilot cities were classified in this research to find differences and similarities among the pilot cities. Four sponge design methods were classified into ten pilot projects. After comparing each project size using the same geographical size, three geometrical types were categorized into both existing and new city areas. SCC project characteristics could be identified by combining four methods and three geometrical types and those of the SCC programs by comparing the change in land-use and the surrounding environment in ten pilot projects.

The results are valuable for implementing SCC projects in China and elsewhere and future research on the impact of SCC projects.

Under the background of rapid urbanization, all kinds of urban water problems have gradually come into being: local flooding frequently happens, water environment is deteriorated, water-supply is in tension, etc. Meanwhile, with rapid development of higher education in China, campus area and scale are gradually expanding, but traditional campus construction has many drawbacks. In order to promote sponge campus planning and construction of universities in hilly areas and provide demonstration windows for sponge city construction, based on deficiencies of campus construction of Hunan City University in the aspect of water resource utilization, we used ArcGis spatial analysis method, simulation method and comparative analysis method on Storm Water Management Model (SWMM) to establish sponge campus construction indexes, content system and optimal design strategies with objectives of campus water safety, water environment and water resource utilization. Results indicate that: difference between sponge campus planning and traditional campus planning mainly lies in rainfall management. We combed the design process of sponge campus planning in hilly areas from the perspective of rainfall management, and simulated the process of sponge facilities controlling the rainfall in the campus via computer model to verify reasonability of sponge facility planning and select the optimal planning and construction plan. This study has defined design process of sponge campus planning in hilly areas to a certain degree and provided a research basis for sponge campus planning and construction of universities, setting up a typical example and driving effects on solving urban local flooding problem and rainfall resource utilization in hilly areas.

Global climate change speeds up ice melting and increases flooding incidents. China launched a sponge city policy as a holistic nature-based solution combined with urban planning and development to address flooding due to climate change. Using Weibo analytics, this paper aims to study public perceptions of sponge city.

This study collected 53,586 sponge city contents from Sina Weibo via Python. Various artificial intelligence tools, such as CX Data Science of Simply Sentiment, KH Coder and Tableau, were applied in the study.

76.8% of public opinion on sponge city were positive, confirming its positive contribution to flooding management and city branding. 17 out of 31 pilot sponge cities recorded the largest number of sponge cities related posts. Other cities with more Weibo posts suffered from rainwater and flooding hazards, such as Xi'an and Zhengzhou.

To the best of the authors’ knowledge, this study is the first to explore the public perception of sponge city in Sina Weibo.

This paper aims to study the synergistic effect of graphene sponge on the thermal properties and shape stability of composite phase change material (PCM).

Graphene oxide sponge is first prepared from an aqueous solution of graphene oxide by freeze-drying method. The oxidized graphene sponge is reduced by hydrazine hydrate. Finally, use vacuum impregnation method to introduce paraffin into graphene sponge to prepare composite PCM.

Graphene sponge is used to improve the shape stability of paraffin wax and improves the thermal conductivity and latent heat of the composite PCM. The thermal conductivity increases by 200 per cent and the composite PCM has excellent reliability in 100 melt-freezing cycles.

A simple way for fabricating composite PCM with high thermal conductivity and latent heat which has the potential to be used as thermal storage materials without container encapsulation has been developed by using graphene sponge and paraffin.

The materials and preparation methods with special structure and properties in this paper provide a new idea for the research of PCM, which can be widely used in the fields of energy conversion and storage.

This paper aims to describe the obtainment of Ti-6Al-4V parts with a hierarchical arrangement of pores by additive manufacturing, aiming at designing orthopedic implants.

The experimental methodology compares microstructural and mechanical properties of Menger pre-fractal sponges of Ti-6Al-4V alloy, manufactured by laser powder bed fusion (LPBF) and electron beam powder bed fusion (EBPBF), with three different porosity volumes. The pore arrangement followed the formation sequence of the Menger sponge, with hierarchical order from 1 to 3.

The LPBF parts presented a martensitic microstructure, while the EBPBF parts presented an α + ß microstructure, independently of its wall thickness. The LPBF parts presented higher mechanical resistance and effective stiffness than the EBPBF parts with similar porosity volume. The stiffness values of the Menger pre-fractal sponges of Ti-6Al-4V alloy, between 4 and 29 GPa, are comparable to those of the cortical bone. Furthermore, the deformation behavior presented by the Menger pre-fractal sponges of Ti-6Al-4V alloy did not follow the Gibson and Ashby model's prediction.

To the best of the authors' knowledge, this is the first study to obtain Menger pre-fractal sponges of Ti-6Al-4V alloy by LPBF and EBPBF. The deformation behavior of the obtained porous parts was contrasted with the Gibson and Ashby model's prediction.

This paper aims to develop an electrochemical dechlorination method for large objects in a short time, which were for a long time in the sea. Traditionally, in conservation, chlorides are extracted from marine iron artifacts using complete immersion of those objects in alkaline solutions with or without electrolysis. However, these techniques are time-consuming and very costly, especially when applied to large marine artifacts such as cannons and anchors.

An appropriate sponge was chosen based on resistance to NaOH and the rate of exacted chlorides. Application of electrochemical dechlorination in situ and removal of chloride were measured by the scanning electron microscope (SEM)-EDAX method on the corrosion products and by titration of the electrolysis solution. X-ray diffraction (XRD) method is used for identification of corrosion products before and after application of electrochemical chloride extraction.

The electrochemical chloride extraction (ECE) method is applied against the corrosion of reinforced concrete. From the authors’ research, it is obvious that ECE can successfully extract chlorides from dried large metallic objects exported from the sea. The method of ECE removes the majority of chlorides from the metal during conservation treatment so that the application of organic coating will allow the object to remain stable over a long period.

A new methodology was developed for dechlorination of metallic objects exported from the sea in a short time and thus the consumption of chemical reagents was cut down.

The application of objective measurement of the mechanical properties of fabrics in the apparel industry began around 1975 in the Hirakata area, which is one of the centres of men's suit production in Japan. At that time the KESF system had been developed and thereafter spread rapidly. The measurement of mechanical data under low‐load level by the KESF provided useful information for the apparel engineers who needed some means of fabric measurement by which the tailoring process might be controlled. The fabric dimensional stability testing using steam press was also standardised at that time (HESC 103A method). At present, the KESF data and the stability data are essential for apparel engineers and are used widely in the Japanese apparel industry. In addition to the use of objective measurements in each factory, a centre for objective fabric inspection has been recently initiated in the Hirakata area, for the inspection and control of fabric by the objective system for tailoring process control. In addition, a co‐operative work between the apparel engineers and the university has been carried out to develop a new equation for predicting the good appearance of a suit on the basis of fabric mechanical data. Automatic tailoring such as automatic overfeed action on the basis of fabric mechanical property is also carried out under the co‐operation of the university, the apparel industry, and a sewing machine manufacturer (Juki) in Hirakata. The progress of these projects is presented.

Shows how to translate the voice of the customer into design processes. Asserts it is esential to apply design tools at the earliest possible stage in the product development cycle. Examines the role of quality function deployment and barometer design using Taguchi methods in designing quality processes. Demonstrates the power of these tools by using a case study from the automotive industry. Concludes that the link of QFD and parameter design by Taguchi methods is a powerful one. Contends that, if done together, it enables upstream quality engineering to become an effective tool for bringing new products to market on time and meeting company and market expectations in all aspects of performance.

Jujube fruit (JF) (Ziziphus jujuba Mill.) is used as pharmaceuticals food, flavors and food additives. The purpose of this paper is to study the suitability of JF incorporation into a commercial sponge cake formulation, and to produce a nutritious bakery product with appropriate organoleptic and technological characteristics.

The optimal level of JF was incorporated into sponge cake using a custom mixture design with three independent variables, namely, refined wheat flour (RWF, 15–28 percent), sugar (7–22 percent) and JF (0–28 percent), as well as several responses, including physical properties, texture profile analysis (TPA), sensorial evaluation and color features. Moreover, physicochemical properties (TPA and oxidative indices) of optimal cake (two of the best JF levels) were compared with control sample (without JF) during 51 days storage period, while two baking temperatures (180°C and 170°C) were used.

The optimal amounts of RWF (21.19 percent), sugar (21.20 percent) and JF (7.61 percent) required for making the sample with maximum springiness, cohesiveness, specific volume, sensorial scores and yellowness, as well as the lowest firmness, baking loss and browning were determined. Desirable effects of JF on the cake quality well maintained throughout the storage period, as TPA attributes, peroxide value, ultraviolet absorbance and acid value showed less changes in JF-incorporated cake than the control sample.

Incorporating JF (~7 percent) into the batter was successful to improve the physicochemical properties in both fresh and stored cake with chocolate-like color.

Gourd fibres (GF) are a natural biodegradable fibre material with excellent mechanical properties and high tensile strength. The use of natural fibres in composite materials has gained popularity in recent years due to their various advantages, including renewability, low cost, low density and biodegradability. Gourd fibre is one such natural fibre that has been identified as a potential reinforcement material for composites. However, it has low surface energy and hydrophobic nature, which makes it difficult to bond with matrix materials such as polyester. To overcome this problem, chemically adapted gourd fibre has been proposed as a solution. Chemical treatment is one of the most widely used methods to improve the properties of natural fibres. This research evaluates the feasibility and effectiveness of incorporating chemically adapted gourd fibre into polyester composites for industrial fabrication. The purpose of this study is to examine the application of chemically modified GF in the production of polyester composite engineering materials.

This work aims to evaluate the effectiveness of chemically adapted gourd fibre in improving the adhesion of gourd fibre with polyester resin in composite fabrication by varying the GF from 5 to 20 wt.%. The study involves the preparation of chemically treated gourd fibre through surface modification using sodium hydroxide (NaOH), permanganate (KMnO₄) and acetic acid (CH₃COOH) coupling agents. The mechanical properties of the modified fibre and composites were investigated. It was then characterized using scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) to determine the changes in surface morphology and functional groups.

FTIR characterization showed that NaOH treatment caused cellulose depolymerization and caused a significant increase in the hydroxyl and carboxyl groups, showing improved surface functional groups; KMnO₄ treatment oxidized the fibre surface and caused the formation of surface oxide groups; and acetic acid treatment induced changes that primarily affected the ester and hydroxyl groups. SEM study showed that NaOH treatment changed the surface morphology of the gourd fibre, introduced voids and reduced hydrophilic tendencies. The tensile strength of the modified gourd fibres increased progressively as the concentration of the modification chemicals increased compared to the untreated fibres.

This work presents the designed composite with density, mechanical properties and microstructure, showing remarkable improvements in the engineering properties. An 181.5% improvement in tensile strength and a 56.63% increase in flexural strength were got over that of the unreinforced polyester. The findings from this work will contribute to the understanding of the potential of chemically adapted gourd fibre as a reinforcement material for composites and provide insights into the development of sustainable composite materials.