Search results

Cotton fibre lots are graded and selected for yarn spinning based on their quality value which is a function of certain fibre properties. Cotton grading and selection has created a domain of emerging interest among the researchers. Several researchers have addressed the said issue using a few exponents of multi-criteria decision-making (MCDM) technique. The purpose of this study is to demonstrate a cotton selection problem using a recently developed measurement of alternatives and ranking according to compromise solution (MARCOS) method which can handle almost any decision problem involving a finite number of alternatives and multiple conflicting decision criteria.

The MARCOS method of the MCDM technique was deployed in this study to rank 17 cotton fibre lots based on their quality values. Six apposite fibre properties, namely, fibre bundle strength, elongation, fineness, upper half mean length, uniformity index and short fibre content are considered as the six decision criteria assigning weights previously determined by an earlier researcher using analytic hierarchy process.

Among the 17 alternatives, C9 secured rank 1 (the best lot) with the highest utility function (0.704) and C7 occupied rank 17 (the worst lot) with the lowest utility function (0.596). Ranking given by MARCOS method showed high degree of congruence with the earlier approaches, as evidenced by high rank correlation coefficients (Rs > 0.814). During sensitivity analyses, no occurrence of rank reversal is observed. The correlations between the quality value-based ranking and the yarn tenacity-based rankings are better than many of the traditional methods. The results can be improved further by adopting other efficient method of weighting the criteria.

The properties of raw cotton have significant impact on the quality of final yarn. Compared to the traditional methods, MCDM is reported as the most viable solution in which fibre parameters are given their due importance while formulating a single index known as quality value. The present study demonstrates the application of a recently developed exponent of MCDM in the name of MARCOS for the first time to address a cotton fibre selection problem for textile spinning mills. The same approach can also be extended to solve other decision problems of the textile industry, in general.

Novelty of the present study lies in the fact that the MARCOS is a very recently developed MCDM method, and this is a maiden application of the MARCOS method in the domain of textile, in general, and cotton industry, in particular. The approach is very simple, highly effective and quite flexible in terms of number of alternatives and decision criteria, although highly robust and stable.

The entropy and thermal behavior analyses of non-Newtonian nanofluid double-diffusive natural convection inside complex domains may captivate a bunch of scholars’ attention because of the potential utilizations that they possess in modern industries, for example, heat exchangers, solar energy collectors and cooling of electronic apparatuses. This study aims to investigate the second law and thermal behavior of non-Newtonian double-diffusive natural convection (DDNC) of Al₂O₃-H₂O nanofluid within a C-shaped cavity emplacing two hot baffles and impacted by a magnetic field.

For the governing equations of the complicated and practical system with all considered parameters to be solved via a formidable numerical approach, the finite element method acts as an approach to achieving the desired solution. This method allows us to gain a detailed solution to the studied geometry.

This investigation has been executed for the considered parameters of range, such as power-law index, baffle length, Lewis number, buoyancy ratio, Hartmann number and Rayleigh number. The main results reveal that isothermal and concentration lines are significantly more distorted, indicating intensified concentration and temperature distributions because of the growth of baffle length (L). Nu_ave decreases by 8.4% and 0.8% while it enhances by 49.86% and 33.87%, respectively, because of growth in the L from 0.1 to 0.2 and 0.2 to 0.3.

Such a comprehensive study on the second law and thermal behavior of DDNC of Al₂O₃-H₂O nanofluid within a C-shaped cavity emplacing two hot baffles and impacted by magnetic field has not yet been carried out.

The process of predicting construction costs and forecasting price fluctuations is a significant and challenging undertaking for project managers. This study aims to develop a construction cost index (CCI) for Jordan’s construction industry using fuzzy analytic hierarchy process (FAHP) and predict future CCI values using traditional and machine learning (ML) techniques.

The most influential cost items were selected by conducting a literature review and confirmatory expert interviews. The cost items’ weights were calculated using FAHP to develop the CCI formula.

The results showed that the random forest model had the lowest mean absolute percentage error (MAPE) of 1.09%, followed by Extreme Gradient Boosting and K-nearest neighbours with MAPEs of 1.41% and 1.46%, respectively.

The novelty of this study lies within the use of FAHP to address the ambiguity of the impact of various cost items on CCI. The developed CCI equation and ML models are expected to significantly benefit construction managers, investors and policymakers in making informed decisions by enhancing their understanding of cost trends in the construction industry.

Using composite indices, the paper examines the nexus between militarization, globalization and liberal democracy. The democratic peace theory, the conflict inhibiting effects of international trade – a key and dominant facet of globalization – and the democracy promoting globalization hypothesis form the theoretical underpinnings of the empirical investigation.

To probe into the issue at hand, the paper adopts a dynamic panel VAR estimation procedure. Given the usual data constraints, the sample consists of 113 countries, and the estimations span the period 1995–2019.

The findings from the dynamic panel VAR estimations suggest the presence of a negative and statistically significant nexus between the level of globalization and the level of militarization. No statistically traceable nexus between globalization and liberal democracy was found.

The findings offer empirical support to the hypothesis that the strong links of interdependence shaped by globalization reduce the need for military preparedness. The results lead to a tentative inference in favor of the doux commerce thesis. Nonetheless, given that the estimations span a historically specific period – the entire post-bipolar era – the inferences that stem from the findings should be treated with caution.

To the best of the authors’ knowledge, the composite indices Bonn International Centre for Conflict Studies (BICC) militarization index, the globalization index of the Swiss Economic Institute (Konjunkturforschungsstelle) (KOF), LibDem, polyarchy have not hitherto been jointly used in previous studies to examine the nexus between militarization, globalization and liberal democracy.

Prefabricated technology is gradually being applied to the construction of subway stations due to its characteristic of mechanization. However, the prefabricated subway station in China is in the initial stage of development, which is prone to construction safety issues. This study aims to evaluate the construction safety risks of prefabricated subway stations in China and formulate corresponding countermeasures to ensure construction safety.

A construction safety risk evaluation index system for the prefabricated subway station was established through literature research and the Delphi method. Furthermore, based on the structure entropy weight method, matter-element theory and evidence theory, a hybrid evaluation model is developed to evaluate the construction safety risks of prefabricated subway stations. The basic probability assignment (BPA) function is obtained using the matter-element theory, the index weight is calculated using the structure entropy weight method to modify the BPA function and the risk evaluation level is determined using the evidence theory. Finally, the reliability and applicability of the evaluation model are verified with a case study of a prefabricated subway station project in China.

The results indicate that the level of construction safety risks in the prefabricated subway station project is relatively low. Man risk, machine risk and method risk are the key factors affecting the overall risk of the project. The evaluation results of the first-level indexes are discussed, and targeted countermeasures are proposed. Therefore, management personnel can deeply understand the construction safety risks of prefabricated subway stations.

This research fills the research gap in the field of construction safety risk assessment of prefabricated subway stations. The methods for construction safety risk assessment are summarized to establish a reliable hybrid evaluation model, laying the foundation for future research. Moreover, the construction safety risk evaluation index system for prefabricated subway stations is proposed, which can be adopted to guide construction safety management.

In this paper the aim is that Aramid/alginate blended nonwoven fabrics were prepared, and the flame retardancy of the blended nonwoven fabrics was studied by thermogravimetric analysis, vertical flame test, limiting oxygen index (LOI) and cone calorimeter test.

The advantages of different fibers can be combined by blending, and the defects may be remedied. The study investigates whether incorporating alginate fibers into aramid fibers can enhance the flame retardancy and reduce the smoke production of prepared aramid/alginate blended nonwoven fabrics.

Thermogravimetric analysis indicated that alginate fibers could effectively inhibit the combustion performance of aramid fibers at a higher temperature zone, leaving more residual chars for heat isolation. And vertical flame test, LOI and cone calorimeter test testified that the incorporation of alginate fibers improved the flame retardancy and fire behaviors. When the ratio of alginate fibers for aramid/alginate blended nonwoven fabrics reached 80%, the incorporation of alginate fibers could notably decreased peak-heat release rate (54%), total heat release (THR) (29%), peak-smoke production rate (93%) and total smoke production (86%). What is more, the lower smoke production rate and lower THR of the blends vastly reduced the risk of secondary injury in fires.

This study proposes to inhibit the flue gas release of aramid fiber and enhance the flame retardant by mixing with alginate fiber, and proposes that alginate fiber can be used as a biological smoke inhibitor, as well as a flame retardant for aramid fiber.

The purpose of the present work is identification and prioritization of barriers to Lean Six Sigma (LSS) implementation in Indian manufacturing industries in the context of Industry 4.0 (I4.0) to surmount the impediments in the path of successful implementation.

In total, 27 barriers identified through critical review of literature and expert's opinion are evaluated with Cronbach's alpha values including item-total correlations or corrected item-total correlations (CITC) using statistical tool. Finally, 20 barriers were analyzed and ranked employing Fuzzy Analytical Hierarchy Process (FAHP).

The study depicts that “Lack of leadership, advisory and monitoring,” “Lack of clarity about economic benefits” and “Lack of integration of LSS with smart tools/I4.0” are potential barriers to drive the path for proper implementation of LSS in Industry 4.0 with due consideration of its technologies in Indian manufacturing industries.

The study provides better knowledge platform for academicians and researchers about hidden aspects of LSS implementation barriers in view of advanced manufacturing technologies. This research will help the practitioners to design their business plans in implementing new quality improvement tools to get advantage in current competitive environment.

The barriers are selected based on literature and opinion from industry and academic experts. Five major criteria are decided after incorporating inputs. The ranking of the barriers is attained by well standard mathematical technique. This will enable the practitioners to design strategies to eliminate the hindrances in order to shape the right path for effective implementation of LSS approach in view of advanced manufacturing technologies.

This study explores the variance in investor responses to the corporate social responsibility (CSR) performance of firms, as influenced by information sources and investor types.

This study applies a short-term event study and cross-sectional analysis with unique CSR datasets obtained from newspaper articles and the Dow Jones Sustainability Index.

Investor reactions are significantly shaped by their sources of information. Individual investors are found to predominantly respond to accessible news announcements, whereas institutional investors show heightened sensitivity to adverse news from both scrutinized sources. Foreign investors, mirroring institutional investors' patterns, uniquely react positively to index additions.

Investors’ assessment of CSR activities varies due to the differing sources of information obtained; further, it is affected by the type of investor.

The findings guide public relation managers in strategizing CSR communication toward diverse investor types. This includes recommending targeted approaches for Japanese individual investors through newspapers and TV, exercising caution in disseminating adverse news to Japanese institutions, and promoting and justifying CSR actions to foreign investors. It underscores the need for a strategic investor relations frameworks that considers accessibility, literacy, and investors' interests.

This study examines the relationship between sources of information for CSR activities and investors’ responses, an area under-represented in the literature. The author uses CSR announcement data, collected from newspapers to make the results more accurate and relevant.

The purpose of this paper is to analyse the influence of perceived quality and customer engagement on perceived value and satisfaction in a model to evaluate loyalty in users of fitness centres.

Through an online questionnaire, the study uses a large sample of 6,584 users from 44 low-cost fitness centres from different cities in Spain. After validating the measurement model, the hypotheses were tested through structural equation (SEM) modelling technique, noting the existence of significant relationships.

The results showed that two dimensions of perceived quality have a positive influence on perceived value (employees) and satisfaction (facilities). However, the enthused participation dimension of customer engagement also indicated an important impact on perceived value and satisfaction, thus confirming the influence of this dimension in the context of sports services for users' loyalty.

With a large sample, the importance of this study lies in the use of strategies to achieve a greater influence on perceived value and satisfaction, with the aim of increasing customer loyalty in fitness centres. This is why, in addition to the service quality, the influence of the customer engagement dimensions is included, which have not been previously analysed in this emerging business model.

El propósito de este trabajo es analizar la influencia de la calidad percibida y el compromiso del cliente sobre el valor percibido y la satisfacción en un modelo para evaluar la lealtad en usuarios de centros de fitness.

A través de un cuestionario online, el estudio utiliza una muestra amplia de 6.584 usuarios de 44 centros de fitness low-cost de diferentes ciudades de España. Tras validar el modelo de medida, las hipótesis fueron contrastadas utilizando análisis de ecuaciones estructurales, observándose la existencia de relaciones significativas.

Los resultados mostraron que dos dimensiones de la calidad percibida tienen una influencia positiva en el valor percibido (empleados) y la satisfacción (instalaciones). Sin embargo, la dimensión de participación entusiasta del compromiso del cliente también indicó un impacto importante en el valor percibido y la satisfacción, lo que confirma la influencia de esta dimensión en el contexto de los servicios deportivos para la fidelización de los usuarios.

Con una extensa muestra, la importancia de este estudio radica en el uso de estrategias para lograr una mayor influencia en el valor percibido y la satisfacción, con el objetivo de fidelizar a los clientes de los centros de fitness. Por eso, además de la calidad del servicio, se incluye la influencia de las dimensiones del compromiso con el cliente, que no han sido analizadas previamente en este modelo de negocio emergente.