To read this content please select one of the options below:

Aramid/alginate blended nonwoven fabrics: thermal degradation properties, flame-retardant mechanism and smoke suppression

Yuan Li (College of Textiles and Clothing, Qingdao University, Qingdao, China)
Yanzhi Xia (College of Materials Science and Engineering, Qingdao University, Qingdao, China)
Min Li (College of Textiles and Clothing, Qingdao University, Qingdao, China)
Jinchi Liu (College of Textiles and Clothing, Qingdao University, Qingdao, China)
Miao Yu (College of Textiles and Clothing, Qingdao University, Qingdao, China)
Yutian Li (College of Textiles and Clothing, Qingdao University, Qingdao, China)

International Journal of Clothing Science and Technology

ISSN: 0955-6222

Article publication date: 5 December 2023

Issue publication date: 13 February 2024

45

Abstract

Purpose

In this paper the aim is that Aramid/alginate blended nonwoven fabrics were prepared, and the flame retardancy of the blended nonwoven fabrics was studied by thermogravimetric analysis, vertical flame test, limiting oxygen index (LOI) and cone calorimeter test.

Design/methodology/approach

The advantages of different fibers can be combined by blending, and the defects may be remedied. The study investigates whether incorporating alginate fibers into aramid fibers can enhance the flame retardancy and reduce the smoke production of prepared aramid/alginate blended nonwoven fabrics.

Findings

Thermogravimetric analysis indicated that alginate fibers could effectively inhibit the combustion performance of aramid fibers at a higher temperature zone, leaving more residual chars for heat isolation. And vertical flame test, LOI and cone calorimeter test testified that the incorporation of alginate fibers improved the flame retardancy and fire behaviors. When the ratio of alginate fibers for aramid/alginate blended nonwoven fabrics reached 80%, the incorporation of alginate fibers could notably decreased peak-heat release rate (54%), total heat release (THR) (29%), peak-smoke production rate (93%) and total smoke production (86%). What is more, the lower smoke production rate and lower THR of the blends vastly reduced the risk of secondary injury in fires.

Originality/value

This study proposes to inhibit the flue gas release of aramid fiber and enhance the flame retardant by mixing with alginate fiber, and proposes that alginate fiber can be used as a biological smoke inhibitor, as well as a flame retardant for aramid fiber.

Keywords

Acknowledgements

The authors would like to acknowledgment the financial support of the National Natural Science Foundation of China (52073151), the National Natural Science Foundation of Shangdong, China (ZR2019PEE022), the Opening Fund of China National Textile and Apparel Council Key Laboratory of Flexible Devices for Intelligent Textile and Apparel, Soochow University (SDHY2106) and Science and Technology guidance project of China Textile Industry Federation (2018078). The authors would also like to thank Textile and Clothing College Experimental Teaching Center of Qingdao University for providing the experimental equipment and site.

Citation

Li, Y., Xia, Y., Li, M., Liu, J., Yu, M. and Li, Y. (2024), "Aramid/alginate blended nonwoven fabrics: thermal degradation properties, flame-retardant mechanism and smoke suppression", International Journal of Clothing Science and Technology, Vol. 36 No. 1, pp. 52-67. https://doi.org/10.1108/IJCST-04-2023-0063

Publisher

:

Emerald Publishing Limited

Copyright © 2023, Emerald Publishing Limited

Related articles