Search results

Tunnel field effect transistors (TFETs) have significantly steeper sub-threshold slope (24–30 mv/decade), as compared with the conventional metal–oxide–semiconductor field-effect transistors (MOSFETs), which have a sub-threshold slope of 60 mv/decade at room temperature. The steep sub-threshold slope of TFETs enables a much faster switching, making TFETs a better option than MOSFETs for low-voltage VLSI applications. The purpose of this paper is to present a novel hetero-junction TFET-based Schmitt triggers, which outperform the conventional complementary metal oxide semiconductor (CMOS) Schmitt triggers at low power supply voltage levels.

The conventional Schmitt trigger has been implemented with both MOSFETs and HTFETs for operation at a low-voltage level of 0.4 V and a target hysteresis width of 100 mV. Simulation results have indicated that the HTFET-based Schmitt trigger not only has significantly lower delays but also consumes lesser power as compared to the CMOS-based Schmitt trigger. The limitations of the conventional Schmitt trigger design have been analysed, and improved CMOS and CMOS–HTFET hybrid Schmitt trigger designs have been presented.

The conventional Schmitt trigger implemented with HTFETs has 99.9% lower propagation delay (29ps) and 41.2% lesser power requirement (4.7 nW) than the analogous CMOS Schmitt trigger, which has a delay of 36 ns and consumes 8 nW of power. An improved Schmitt trigger design has been proposed which has a transistor count of only six as compared to the eight transistors required in the conventional design. The proposed improved Schmitt trigger design, when implemented with only CMOS devices enable a reduction of power delay product (PDP) by 98.4% with respect to the CMOS conventional Schmitt trigger design. The proposed CMOS–HTFET hybrid Schmitt trigger further helps in decreasing the delay of the improved CMOS-only Schmitt trigger by 70% and PDP by 21%.

The unique advantage of very steep sub-threshold slope of HTFETs has been used to improve the performance of the conventional Schmitt trigger circuit. Novel CMOS-only and CMOS–HTFET hybrid improved Schmitt trigger designs have been proposed which requires lesser number of transistors (saving 70% chip area) for implementation and has significantly lower delays and power requirement than the conventional designs.

Several ultra-low power and gigahertz current-starved voltage-controlled oscillator (CSVCO) circuits have been proposed and compared here. The presented structures are based on the three-stage hybrid circuit of the carbon nanotube field-effect transistors (CNTFETs) and low-power MOSFETs. The topologies exploit modified and compensated Schmitt trigger comparator parts to demonstrate better consumption power and frequency characteristics. The basic idea in the presented topologies is to compensate the Schmitt trigger comparator part of the basic CSVCO for achieving faster carrier mobility of the holes, reducing transistor leakage current and eliminating dummy transistors.

This study aims to propose and compare three different comparator-based VCOs that have been implemented using the CNTFETs. The considered circuits are shown to be capable of delivering the maximum 35 tuning frequency in the order of 1 GHz to 5 GHz. A major power thirsty part of the high-frequency ring VCOs is the Schmitt trigger stage. Here, several fast and low-power Schmitt trigger topologies are exploited to mitigate the dissipation power and enhance the oscillation frequency.

As a result of proposed modifications, more than one order of magnitude mitigation in the VCO power consumption with respect to the previously presented three-stage CSVCO is reported here. Thus, a VCO dissipation power of 3.5 µW at the frequency of 1.1 GHz and the tuning range of 26 per cent is observed for the well-established 32 nm technology and the supply voltage of 1 V. Such a low dissipation power is obtained around the operating frequency of the battery-powered cellular phones. In addition, using the p-carrier mobility compensation and enhancing the rise time of the Schmitt trigger part of the CSVCO, a maximum of 2.38 times higher oscillation frequency and 72 per cent wider tuning range with respect to Rahane and Kureshi (2017) are observed. Simultaneously, this topology exhibits an average of 20 per cent reduction in the power consumption.

Several new VCO topologies are presented here, and it is shown that they can significantly enhance the power dissipation of the GHz CSVCOs.

The purpose of this paper is to design novel hardened flip-flop using carbon nanotube field effect transistors (CNTFETs).

To design the proposed flip-flop, the Schmitt trigger-based soft error masking and unhardened latches have been used. In the proposed design, the novel mechanism, i.e. hysteresis property is used to enhance the hardness of the single event upset.

To obtain the simulation results, all the proposed circuits are extensively simulated in Hewlett simulation program with integrated circuit emphasis software. Moreover, the results of the proposed latches are compared to the conventional latches to show performance improvements. It is noted that the proposed latch shows the performance improvements up to 25.8%, 51.2% and 17.8%, respectively, in terms of power consumption, area and power delay product compared to the conventional latches. Additionally, it is observed that the simulation result of the proposed flip-flop confirmed the correctness with its respective functions.

The novel hardened flip-flop utilizing ST based SEM latch is presented. This flip-flop is significantly improves the performance and reliability compared to the existing flip-flops.

The purpose of this article is to analyze the experiences experienced during the COVID-19 pandemic quarantine, based on an experimental marketing perspective and to validate a scale of experiences for the quarantine context.

The life of a human being is a sum of the experiences that occur in their daily life, from experiences at home, to experiences at work, shopping, holidays and, essentially, with other human beings. However, experiences during the quarantine period became limited to experiences at home. For this, we used a questionnaire survey that analyzes the experiences experienced by individuals. The sample consists of 726 individuals who were in Portugal during the quarantine and confinement period.

The results show that the exploratory and confirmatory factor analysis produced a structure with four factors that the authors called Sense and Feel, Pandemic Feel, Pandemic Think and Act. The experiences are manifested with greater intensity in the factors Pandemic Think and Sense and Feel. The scale of experiences used showed to have convergent and discriminant validity and adequate internal consistency. It is expected that the present study will contribute to increase scientific knowledge in the behavioral area and in the area of positive psychology in the context of pandemic and confinement situations.

The results achieved become useful for health and marketing professionals, which allow them to define appropriate strategies to better serve the population in order to improve people's health, well-being and quality of life.

The Hall‐effect sensor is one of the most widely‐used, yet least understood, transducers around.

The development of a sensor microsystems containing all the components of data acquisition system, such as sensors, signal‐conditioning circuits, analog‐digital converter, interface circuits and embedded microcontroller (MCU), has become the focus of attention in many biomedical applications. A review of the microsystems technology is presented in this paper, along with a discussion of the recent trends and challenges associated with its developments. A basic description of each sub‐system is also given. This includes the different front end, mixed analog‐digital, power management, and radio transmitter‐receiver circuits. These sub‐system designs are presented and discussed in a comparative study and final remarks are made. The performance of each sub‐system is assessed regarding many aspects related to the overall system performance.

An investigation to evaluate the suitability of anodised aluminium as a substrate material has shown that the relatively high coefficient of thermal expansion of the aluminium caused the brittle cermet resistors to craze giving rise to unstable resistance values whereas PTF resistors appeared to suffer no ill effects. The work was implemented in conjunction with selection of low temperature thick film conductor and resistor inks to achieve the optimum combination of anodised aluminium substrate and ink system. These inks were then printed and fired on anodised aluminium, aluminium nitride and alumina substrates, and the physical and electrical properties of the inks and substrates compared. A combination of modest success, employing polymer resistors and cermet conductors, produced viable circuits with resistors of reasonable stability. A low power hybrid device, with surface mounted components, was employed to further validate the substrate/ink combinations in ongoing tests.

Emerging event-driven applications such as the internet-of-things requires an ultra-low power operation to prolong battery life. Shutting down non-functional block during standby mode is an efficient way to save power. However, it results in a loss of system state, and a considerable amount of energy is required to restore the system state. Conventional state retentive flip-flops have an “Always ON” circuitry, which results in large leakage power consumption, especially during long standby periods. Therefore, this paper aims to explore the emerging non-volatile memory element spin transfer torque-magnetic tunnel junction (STT-MTJ) as one the prospective candidate to obtain a low-power solution to state retention.

The conventional D flip-flop is modified by using STT-MTJ to incorporate non-volatility in slave latch. Two novel designs are proposed in this paper, which can store the data of a flip-flip into the MTJs before power off and restores after power on to resume the operation from pre-standby state.

A comparison of the proposed design with the conventional state retentive flip-flop shows 100 per cent reduction in leakage power during standby mode with 66-69 per cent active power and 55-64 per cent delay overhead. Also, a comparison with existing MTJ-based non-volatile flip-flop shows a reduction in energy consumption and area overhead. Furthermore, use of a fully depleted-silicon on insulator and fin field-effect transistor substituting a complementary metal oxide semiconductor results in 70-80 per cent reduction in the total power consumption.

Two novel state-retentive D flip-flops using STT-MTJ are proposed in this paper, which aims to obtain zero leakage power during standby mode.

Walking-aid exoskeletons can assist and protect effectively the group with lower limb muscle strength decline, workers, first responders and military personnel. However, there is almost no united control strategy that can effectively assist daily walking. This paper aims to propose a hybrid oscillators’ (HOs) model to adapt to irregular gait (IG) patterns (frequent alternation between walking and standing or rapid changing of walking speed, etc.) and generate compliant and no-delay assistive torque.

The proposed algorithm, HOs, combines adaptive oscillators (AOs) with phase oscillator through switching assistive mode depending on whether or not the AOs' predicting error of hip joint degree is exceeded our expectation. HOs can compensate for delay by predicting gait phase when in AOs mode. Several treadmill and free walking experiments are designed to test the adaptability and effectiveness of HOs model under IG.

The experimental results show that the assistive strategy based on the HOs is effective under IG patterns, and delay is compensated totally under quasiperiodic gait conditions where a smoother human–robot interaction (HRI) force and the reduction of HRI force peak are observed. Delay compensation is found very effective at improving the performance of the assistive exoskeleton.

A novel algorithm is proposed to improve the adaptability of a walking assist hip exoskeleton in daily walking as well as generate compliant, no-delay assistive torque when converging.

The Amalgamation of Functions The requirements of the first engine controllers were primarily to satisfy the needs of the engine and, almost as an afterthought, to consider interface with the aircraft and the pilot. The latter resulted in the overwhelming plethora of “essential” ground test‐sets and cockpit instruments that we see today. In a performance and integrity conscious world, beset with ever increasing costs and sometimes decreasing maintenance personnel skills, the engine controller can no longer be considered in isolation from the rest of the system that it serves. The obvious ability of a digital system to self‐check and diagnose itself, its interface with the real world, and to make intelligent decisions based on those tests, has enhanced the case for digital engine control.