To read this content please select one of the options below:

Proposed 3.5 µW CNTFET-MOSFET hybrid CSVCO for power-efficient gigahertz applications

Hamidreza Ghanbari Khorram (Department of Electrical Engineering, Hamedan University of Technology, Hamedan, Iran)
Alireza Kokabi (Department of Electrical Engineering, Hamedan University of Technology, Hamedan, Iran)

Circuit World

ISSN: 0305-6120

Article publication date: 3 February 2020

Issue publication date: 18 June 2020

85

Abstract

Purpose

Several ultra-low power and gigahertz current-starved voltage-controlled oscillator (CSVCO) circuits have been proposed and compared here. The presented structures are based on the three-stage hybrid circuit of the carbon nanotube field-effect transistors (CNTFETs) and low-power MOSFETs. The topologies exploit modified and compensated Schmitt trigger comparator parts to demonstrate better consumption power and frequency characteristics. The basic idea in the presented topologies is to compensate the Schmitt trigger comparator part of the basic CSVCO for achieving faster carrier mobility of the holes, reducing transistor leakage current and eliminating dummy transistors.

Design/methodology/approach

This study aims to propose and compare three different comparator-based VCOs that have been implemented using the CNTFETs. The considered circuits are shown to be capable of delivering the maximum 35 tuning frequency in the order of 1 GHz to 5 GHz. A major power thirsty part of the high-frequency ring VCOs is the Schmitt trigger stage. Here, several fast and low-power Schmitt trigger topologies are exploited to mitigate the dissipation power and enhance the oscillation frequency.

Findings

As a result of proposed modifications, more than one order of magnitude mitigation in the VCO power consumption with respect to the previously presented three-stage CSVCO is reported here. Thus, a VCO dissipation power of 3.5 µW at the frequency of 1.1 GHz and the tuning range of 26 per cent is observed for the well-established 32 nm technology and the supply voltage of 1 V. Such a low dissipation power is obtained around the operating frequency of the battery-powered cellular phones. In addition, using the p-carrier mobility compensation and enhancing the rise time of the Schmitt trigger part of the CSVCO, a maximum of 2.38 times higher oscillation frequency and 72 per cent wider tuning range with respect to Rahane and Kureshi (2017) are observed. Simultaneously, this topology exhibits an average of 20 per cent reduction in the power consumption.

Originality/value

Several new VCO topologies are presented here, and it is shown that they can significantly enhance the power dissipation of the GHz CSVCOs.

Keywords

Citation

Ghanbari Khorram, H. and Kokabi, A. (2020), "Proposed 3.5 µW CNTFET-MOSFET hybrid CSVCO for power-efficient gigahertz applications", Circuit World, Vol. 46 No. 3, pp. 193-202. https://doi.org/10.1108/CW-03-2019-0022

Publisher

:

Emerald Publishing Limited

Copyright © 2020, Emerald Publishing Limited

Related articles