Search results

Taking attribution theory as an overarching framework, the study aims to examine how employees attribute and respond to a colleague's approach crafting.

Two complementary studies, including a scenario experiment (Study 1; N = 114) and an online survey (Study 2; N = 220), were conducted to test the hypothesized model.

Study 1 found support for the attribution of a prosocial motive to approach crafting, which in turn led to more social support and less social undermining among observers. This mediation was stronger when the job crafter was perceived as less other-oriented. Study 2 replicated the findings of Study 1 and further showed that when observers attributed both high impression management and prosocial motives to approach crafting, the positive relationship between their prosocial motive attribution and social support for the job crafter got weakened, while the negative relationship between their prosocial motive attribution and social undermining of the job crafter was strengthened.

The findings demonstrate that approach crafting gives rise to specific attributions and reactions toward the job crafter, which enrich the understanding of the social consequences of job crafting in the workplace.

This paper presents an experimental investigation in establishing the relationship between FDM process parameters and tensile strength of polycarbonate (PC) samples using the I-Optimal design.

I-optimal design methodology is used to plan the experiments by means of Minitab-17.1 software. Samples are manufactured using Stratsys FDM 400mc and tested as per ISO standards. Additionally, an artificial neural network model was developed and compared to the regression model in order to select an appropriate model for optimisation. Finally, the genetic algorithm (GA) solver is executed for improvement of tensile strength of FDM built PC components.

This study demonstrates that the selected process parameters (raster angle, raster to raster air gap, build orientation about Y axis and the number of contours) had significant effect on tensile strength with raster angle being the most influential factor. Increasing the build orientation about Y axis produced specimens with compact structures that resulted in improved fracture resistance.

The fitted regression model has a p-value less than 0.05 which suggests that the model terms significantly represent the tensile strength of PC samples. Further, from the normal probability plot it was found that the residuals follow a straight line, thus the developed model provides adequate predictions. Furthermore, from the validation runs, a close agreement between the predicted and actual values was seen along the reference line which further supports satisfactory model predictions.

This study successfully investigated the effects of the selected process parameters - raster angle, raster to raster air gap, build orientation about Y axis and the number of contours - on tensile strength of PC samples utilising the I-optimal design and ANOVA. In addition, for prediction of the part strength, regression and ANN models were developed. The selected ANN model was optimised using the GA-solver for determination of optimal parameter settings.

The proposed ANN-GA approach is more appropriate to establish the non-linear relationship between the selected process parameters and tensile strength. Further, the proposed ANN-GA methodology can assist in manufacture of various industrial products with Nylon, polyethylene terephthalate glycol (PETG) and PET as new 3DP materials.

This study aims to enhance merging of additive manufacturing (AM) techniques with powder injection molding (PIM). In this way, the prototypes could be 3D-printed and mass production implemented using PIM. Thus, the surface properties and mechanical performance of parts produced using powder/polymer binder feedstocks [material extrusion (MEX) and PIM] were investigated and compared with powder manufacturing based on direct metal laser sintering (DMLS).

PIM parts were manufactured from 17-4PH stainless steel PIM-quality powder and powder intended for powder bed fusion compounded with a recently developed environmentally benign binder. Rheological data obtained at the relevant temperatures were used to set up the process parameters of injection molding. The tensile and yield strengths as well as the strain at break were determined for PIM sintered parts and compared to those produced using MEX and DMLS. Surface properties were evaluated through a 3D scanner and analyzed with advanced statistical tools.

Advanced statistical analyses of the surface properties showed the proximity between the surfaces created via PIM and MEX. The tensile and yield strengths, as well as the strain at break, suggested that DMLS provides sintered samples with the highest strength and ductility; however, PIM parts made from environmentally benign feedstock may successfully compete with this manufacturing route.

This study addresses the issues connected to the merging of two environmentally efficient processing routes. The literature survey included has shown that there is so far no study comparing AM and PIM techniques systematically on the fixed part shape and dimensions using advanced statistical tools to derive the proximity of the investigated processing routes.

This paper aims to evaluate the mechanical behaviour of polycarbonate/acrylonitrile butadiene styrene (PC/ABS) filaments for fusion filament fabrication (FFF). PC/ABS have emerged as a promising material for FFF due to their excellent mechanical properties. However, the optimal processing conditions and the effect of the blending ratio on the mechanical properties of the resulting workpieces are still unclear.

A statistical factorial matrix was designed, including infill pattern, printing speed, nozzle size, layer height and printing temperature as factors (with three levels). A total of 810 workpieces were printed using PC/ABS blends filament with the FFF. The workpieces’ finishing and mass were evaluated. Tensile tests were performed. Analysis of variance was performed to determine the main effects of the processing conditions on the mechanical properties.

The results showed that the PC/ABS (70/30) exhibited higher tensile. Tensile rupture corresponded to 30% of the tensile strength. The infill pattern showed the highest contribution to the responses. The concentric pattern showed higher tensile strength. Tensile strength and mass ratio demonstrated the influence of mass on tensile strength. The influence of printing parameters on deformation depended on the blend proportions. Higher printing speed and lower layer height provided better quality workpieces.

This study has implications for the design and manufacturing of three-dimensional printed parts using PC/ABS filaments. An extensive experimental matrix was applied, aiming at a complete understanding of mechanical behavior, considering the main printing parameters and combinations not explored by literature.

The purpose of this paper is to compare the influence of relative density (RD) and strain rates on failure mechanism and specific energy absorption (SEA) of polyamide lattices ranging from bending to stretch-dominated structures using selective laser sintering (SLS).

Three bending and two stretch-dominated unit cells were selected based on the Maxwell stability criterion. Lattices were designed with three RD and fabricated by SLS technique using PA12 material. Quasi-static compression tests with three strain rates were carried out using Taguchi's L9 experiments. The lattice compressive behaviour was verified with the Gibson–Ashby analytical model.

It has been observed that RD and strain rates played a vital role in lattice compressive properties by controlling failure mechanisms, resulting in distinct post-yielding responses as fluctuating and stable hardening in the plateau region. Analysis of variance (ANOVA) displayed the significant impact of RD and emphasised dissimilar influences of strain rate that vary to cell topology. Bending-dominated lattices showed better compressive properties than stretch-dominated lattices. The interesting observation is that stretch-dominated lattices with over-stiff topology exhibited less compressive properties contrary to the Maxwell stability criterion, whereas strain rate has less influence on the SEA of face-centered and body-centered cubic unit cells with vertical and horizontal struts (FBCCXYZ).

This comparative study is expected to provide new prospects for designing end-user parts that undergo various impact conditions like automotive bumpers and evolving techniques like hybrid and functionally graded lattices.

To the best of the authors' knowledge, this is the first work that relates the strain rate with compressive properties and also highlights the lattice behaviour transformation from ductile to brittle while the increase of RD and strain rate analytically using the Gibson–Ashby analytical model.

This paper aims to examine the static compression characteristics of cell topologies in body-centered cubic with vertical struts (BCCZ) and face-centered cubic with vertical struts (FCCZ) along with novel BCCZZ and FCCZZ lattice structures.

The newly developed structures were obtained by adding extra interior vertical struts into the BCCZ and FCCZ configurations. The samples, composed of the AlSi10Mg alloy, were fabricated using the selective laser melting (SLM) additive manufacturing technique. The specific compressive strength and failure behavior of the manufactured lattice structures were investigated, and comparative analysis among them was done.

The results revealed that the specific strength of BCCZZ and FCCZZ samples with 0.5 mm strut diameter exhibited approximately a 23% and 18% increase, respectively, compared with the BCCZ and FCCZ samples with identical strut diameters. Moreover, finite element analysis was carried out to simulate the compressive response of the lattice structures, which could be used to predict their strength and collapse mode. The findings showed that while the local buckling of lattice cells is the major failure mode, the samples subsequently collapsed along a diagonal shear band.

An original and systematic investigation was conducted to explore the compression properties of newly fabricated lattice structures using SLM. The results revealed that the novel FCCZZ and BCCZZ structures were found to possess significant potential for load-bearing applications.

Adhesively bonded joints are used in many fields, especially in the automotive, marine, aviation, defense and outdoor industries. Adhesive bonding offers advantages over traditional mechanical methods, including the ability to join diverse materials, even load distribution and efficient thermal-electrical insulation. This study aims to investigate the mechanical properties of adhesively bonded joints, focusing on adherends produced with auxetic and flat surfaces adhered with varying adhesive thicknesses.

The research uses three-dimensional (3D)-printed materials, polyethylene terephthalate glycol and polylactic acid, and two adhesive types with ductile and brittle properties for single lap joints, analyzing their mechanical performance through tensile testing. The adhesion region of one of these adherends was formed with a flat surface and the other with an auxetic surface. Adhesively bonded joints were produced with 0.2, 0.3 and 0.4 mm bonding thickness.

Results reveal that auxetic adherends exhibit higher strength compared to flat surfaces. Interestingly, the strength of ductile adhesives in auxetic bonded joints increases with adhesive thickness, while brittle adhesive strength decreases with thicker auxetic bonds. Moreover, the auxetic structure displays reduced elongation under comparable force.

The findings emphasize the intricate interplay between adhesive type, bonded surface configuration of adherend and bonding thickness, crucial for understanding the mechanical behavior of adhesively bonded joints in the context of 3D-printed materials.

This study aims to investigate the comparative importance of factors influencing the customer shift behavior from conventional to Islamic banking for consumer finance in Pakistan.

First, a comprehensive analysis of the existing literature was conducted to identify a broad range of factors related to customer shift behavior. Through an expert sampling, 14 essential factors were chosen for further investigation. Second, a questionnaire was developed using the analytical hierarchy process (AHP). This questionnaire was then distributed among customers who had previously been using conventional banking services but had made a shift toward Islamic banking. The purpose of this questionnaire was to gather data and insights regarding their motivations and decision-making process behind the shift, and a sample 215 customers are taken in the study.

The results of AHP depicts that the religiosity is a most important factor influencing customers to shift from conventional to Islamic banking, and the second most important factor is pricing. The other subsequent important factors are reputation of the bank, marketing and promotion, service quality, behavior of banks staff, Shariah compliance, management, convenience, fastness and charges/fees. Whereas documentation, ambiance and recommendation are found least important factors to patronize Islamic banking.

The study recommends Islamic banks to create awareness, concentrating on religious factor to have a greater impact on growth of Islamic banking and shrinking of conventional banking. Further, it suggests Islamic banks to apply Shariah-recommended approach of doing business, to help community in best possible way and to launch differentiated marketing techniques to attract customers. It also proposes regulatory authorities to provide facilitation to Islamic banking business by providing level playing field similar to conventional banking, tax equality and conversion of public financing from conventional banking to Islamic banking.

The originality of this study lies in its comprehensive analysis of factors influencing consumer shift behavior from conventional to Islamic banking in the context of consumer finance in Pakistan. By using the AHP, the study provides a structured approach to understanding the relative importance of these factors. This is the uniqueness of the paper that it applies the AHP for the analysis. Furthermore, the study offers practical implications for Islamic banks and regulatory authorities to effectively address and capitalize on this consumer shift trend.

This study aims to understand how quickly Japanese banks readjust their capital ratios (leverage, regulatory capital, tier-I capital and common equity) following an economic shock.

This study uses a two-step system GMM framework to test the study's hypotheses using the annual data of Japanese commercial and cooperative banks ranging from 2005 to 2020.

The findings show that banks adjust their leverage ratio faster than regulatory capital, tier-I capital and common equity ratios. In addition to that, the results reveal that the speed of capital adjustment is higher for commercial banks than for cooperative banks, suggesting higher economic costs and implications for commercial banks. Furthermore, it is worth noting that well-capitalised (under-capitalised) banks tend to prioritise the adjustments to common equity (leverage) before considering the adjustments to leverage (common equity). According to the results, high-liquid (low-liquid) banks alter their regulatory capital and tier-I capital ratios (leverage) more quickly (more slowly) than low-liquid (high-liquid) banks.

The findings suggest that when formulating and implementing new banking regulations, particularly in assessing and adjusting specific capital requirements under Pillar II of Basel III, management (including bankers, regulators and policymakers) should consider the heterogeneity observed in the rate of capital adjustment across various bank characteristics. Additionally, bank managers should also consider the speed of adjustment when determining optimal half-life and target capital structures.

To the author's knowledge, this study represents a pioneering investigation into the rate of adjustment of capital ratios (leverage, regulatory, tier-I and common equity) within Japan's banking sector. The study employs a comprehensive dataset encompassing both commercial and cooperative banks to facilitate this analysis. A notable contribution to the existing body of literature, this study offers a detailed analysis and emphasises the varying degrees of adjustment in capital ratios. The study also highlights the heterogeneous nature of the adjustment rate in these ratios by categorising the data into well-capitalised, under-capitalised, highly liquid and low-liquid banks.

Despite its flourishing development since first proposed, job crafting literature has provided limited insights into why people craft their jobs. This study theoretically develops a two-dimensional integrative framework for the motives of job crafting, including orientation (self-oriented vs work-oriented vs other-oriented) and self-determination (autonomous vs introjected vs external) dimensions. We further investigate the specific motives of job crafting from actor and observer perspectives.

We conducted two critical-incident recall surveys among 120 and 100 employees from varied sectors and organizations, who responded from the actor and observer perspective respectively. 395 and 299 valid open-ended responses were then collected and coded following the steps for content analysis.

Drawing from the proposed two-dimensional theoretical framework, we identified 16 specific job crafting motives from actor and observer perspectives.

Our findings remind managers to pay attention to employees' motives of job crafting and take appropriate managerial actions according to their varied motives.

By incorporating job crafting from the motivation literature and identifying diversified motives that drive employees to engage in job crafting, this qualitative study contributes to both the job crafting literature and the broader application of self-determination theory in the field of organizational behavior.