Search results
1 – 10 of 107Ravi Pratap Singh, Narendra Kumar, Ashutosh Kumar Gupta and Madhusudan Painuly
The purpose of this paper is to investigate experimentally the effect of several input process factors, namely, feed rate, spindle speed, ultrasonic power and coolant pressure, on…
Abstract
Purpose
The purpose of this paper is to investigate experimentally the effect of several input process factors, namely, feed rate, spindle speed, ultrasonic power and coolant pressure, on hole quality measures (penetration rate [PR] and chipping diameter [CD]) in rotary mode ultrasonic drilling of macor bioceramic material.
Design/methodology/approach
The main experiments were planned using the response surface methodology (RSM). Scanning electron microscopy was also used to examine and study the microstructure of machined samples. This study revealed the existence of dominant brittle fracture and little plastic flow that resulted in a material loss from the base work surface. Experiment findings have shown the dependability and adequacy of the proposed mathematical model.
Findings
The percentage of brittle mode deformation rises as the penetration depth of abrasives increases (at increasing levels of feed rate). This was due to the fact that at greater depths of indentation, material loss begins in the form of bigger chunks and develops inter-granular fractures. These stated causes have provided an additional advantage to increasing the CD over the machined rod of bioceramic. The desirability method was also used to optimize multi-response measured responses (PR and CD). The mathematical model created using the RSM method will be very useful in industrial revelation. Furthermore, the investigated answers’ particle swarm optimization (PSO) and teacher-learner-based optimization (TLBO) make the parametric analysis more relevant and productive for real-life industrial practices.
Originality/value
Macor bioceramic has been widely recognized as one of the most highly demanded innovative dental ceramics, receiving expanded industry approval because of its outstanding and superior characteristics. However, effective and efficient processing remains a problem. Among the available contemporary machining methods introduced for processing typical and advanced materials, rotary mode ultrasonic machining has been identified as one of the best suitable candidates for precise processing of macor bioceramics, as this process produces thermal damage-free profiles, as well as high accuracy and an increased material removal rate. The optimized combined setting obtained using PSO is feed rate = 0.16 mm/s, spindle speed = 4,500 rpm, ultrasonic power = 60% and coolant pressure = 280 kPa with the value of fitness function is 0.0508. The optimized combined setting obtained using TLBO is feed rate = 0.06 mm/s, spindle speed = 2,500 rpm, ultrasonic power = 60% and coolant pressure = 280 kPa with the value of fitness function is 0.1703.
Details
Keywords
Kanwal Jit Singh, Inderpreet Singh Ahuja and Jatinder Kapoor
This review paper reveals the literature on ultrasonic, chemical-assisted ultrasonic and rotary ultrasonic machining (USM) of glass material. The purpose of this review paper is…
Abstract
Purpose
This review paper reveals the literature on ultrasonic, chemical-assisted ultrasonic and rotary ultrasonic machining (USM) of glass material. The purpose of this review paper is to understand and describe the working principle, mechanism of material removal, experimental investigation, applications and influence of input parameters on machining characteristics. The literature reveals that the ultrasonic machines have been generally preferred for the glass and brittle work materials. Some other non-traditional machining processes may thermally damage the work surface. Through these USM, neither thermal effects nor residual stresses have been generated on the machined surface.
Design/methodology/approach
Various input parameters have the significant role in machine performance characteristics. For the optimization of output response, several input parameters have been critically investigated by the various researcher.
Findings
Some advance types of glasses such as polycarbonate bulletproof glass, acrylic heat-resistant glass and glass-clad polycarbonate bulletproof glass still need some further investigation because these materials have vast applications in automobile, aerospace and space industries.
Originality/value
Review paper will be beneficial for industrial application and the various young researcher. Paper reveals the detail literature review on traditional ultrasonic, chemical assisted ultrasonic and rotary USM of glass and glass composite materials.
Details
Keywords
Atul Babbar, Vivek Jain and Dheeraj Gupta
In present research work, the effects of rotational speed, feed rate and vibration amplitude have been investigated during novel method of ultrasonic-assisted bone grinding…
Abstract
Purpose
In present research work, the effects of rotational speed, feed rate and vibration amplitude have been investigated during novel method of ultrasonic-assisted bone grinding. During dissection of tumors, firstly a bone flap is removed near the target region to create passage for grinding burr. During abrasion, heat is produced, which sometimes increases the temperature to unsafe levels. So, efforts have been made to limit the temperature below the threshold levels of osteonecrosis during bone grinding.
Design/methodology/approach
The temperature produced during osteotomy has been measured using infrared thermography camera during the implementation of L18 Taguchi orthogonal array design. Subsequently, main effect plots and contour plots have been presented to analyze and visualize the effect of grinding parameters on temperature rise during bone grinding. Furthermore, the process parameters have been optimized for optimum results for response characteristics using Taguchi SN ratio-based optimization methodology. For multiobjective optimization, the process parameters are further optimized using grey relational analysis.
Findings
It is revealed that all three process parameters substantially affect the response characteristics. The proposed optimization methodology is successfully applied on the experimental findings and the optimum results for change in temperature are found to be rotational speed = 3,000 rpm, feed rate = 20 mm/min, amplitude = 10 µm and for standard deviation are 5,000 rpm, 60 mm/min, 10 µm.
Research limitations/implications
The present research findings cannot be generalized, and researchers are encouraged to further investigate the proposed rotary ultrasonic-assisted bone grinding at higher rotational speed up to 60k rpm on the skull bone.
Originality/value
The research on osteotomy is still at its initial phase, and continuous research is carried out for making patients’ life comfortable. In this direction, the authors have proposed a novel osteotomy method to limit the temperature below the threshold limit of osteonecrosis. The outcomes of the present study will be beneficial for the neurosurgeons working in this field.
Details
Keywords
Rahul Dev Gupta, Pardeep Gupta and Rajesh Khanna
This paper consolidates and presents the results of a work conducted to fabricate micro-channels on titanium grade-2 material by ultrasonic machining process (USM). In this…
Abstract
Purpose
This paper consolidates and presents the results of a work conducted to fabricate micro-channels on titanium grade-2 material by ultrasonic machining process (USM). In this research, the effects of important USM parameters, namely, kind of abrasives and its size, concentration of slurry, USM power rating and feed rate, have been probed on micro-channels quality for average surface roughness and process throughput in the form of material removal rate.
Design/methodology/approach
Multiple micro-channels on commercially pure titanium (i.e. Ti grade-2) have been fabricated in a single pass by employing micro-tool based USM process. Taguchi-based L18 (mixed level) OA has been selected for experimental design. Analysis of variance (ANOVA) study and regression modeling have also been done. Non-Dominated Sorting Genetic Algorithm (NSGA-II) has been used for process optimization to get optimum values of material removal rate (MRR) and surface roughness (SR).
Findings
The influence of important USM variables on SR and MRR have been investigated, and NSGA-II-based multi-response optimization has been done. The best surface roughness values obtained via NSGA-II solution for SiC and B4C are 0.354 µm and 1.303 µm, respectively. Scanned electron microscopic investigation proves the fabrication of micro-channels with smooth surfaces, and minimum burrs and other defects. The material removed from the surface was due to ductile fractures.
Originality/value
Miniaturization is a modern trend these days to solve many precision, scientific and industrial problems. To manufacture precise micro-products, shapes and features, advanced and micro-machining processes can play a very prominent role. Micro-channels are typical micro-features required in micro-fluidic applications like micro heat exchangers and micro-pumps. Exhaustive review of existing research work indicated that precision micromachining of various materials can be effectively performed using USM, though not much work has been undertaken to explore the feasibility of multiple micro-channels in a single run using USM. The current work fulfills the gap, where multiple micro-channels on commercially pure titanium (i.e. Ti grade-2) have been fabricated in a single pass by employing micro-tool-based USM process.
Details
Keywords
Zhenlong Peng, Aowei Han, Chenlin Wang, Hongru Jin and Xiangyu Zhang
Unconventional machining processes, particularly ultrasonic vibration cutting (UVC), can overcome such technical bottlenecks. However, the precise mechanism through which UVC…
Abstract
Purpose
Unconventional machining processes, particularly ultrasonic vibration cutting (UVC), can overcome such technical bottlenecks. However, the precise mechanism through which UVC affects the in-service functional performance of advanced aerospace materials remains obscure. This limits their industrial application and requires a deeper understanding.
Design/methodology/approach
The surface integrity and in-service functional performance of advanced aerospace materials are important guarantees for safety and stability in the aerospace industry. For advanced aerospace materials, which are difficult-to-machine, conventional machining processes cannot meet the requirements of high in-service functional performance owing to rapid tool wear, low processing efficiency and high cutting forces and temperatures in the cutting area during machining.
Findings
To address this literature gap, this study is focused on the quantitative evaluation of the in-service functional performance (fatigue performance, wear resistance and corrosion resistance) of advanced aerospace materials. First, the characteristics and usage background of advanced aerospace materials are elaborated in detail. Second, the improved effect of UVC on in-service functional performance is summarized. We have also explored the unique advantages of UVC during the processing of advanced aerospace materials. Finally, in response to some of the limitations of UVC, future development directions are proposed, including improvements in ultrasound systems, upgrades in ultrasound processing objects and theoretical breakthroughs in in-service functional performance.
Originality/value
This study provides insights into the optimization of machining processes to improve the in-service functional performance of advanced aviation materials, particularly the use of UVC and its unique process advantages.
Details
Keywords
Raj Agarwal, Vishal Gupta and Jaskaran Singh
The complications caused by metallic orthopaedic bone screws like stress-shielding effect, screw loosening, screw migration, higher density difference, painful reoperation and…
Abstract
Purpose
The complications caused by metallic orthopaedic bone screws like stress-shielding effect, screw loosening, screw migration, higher density difference, painful reoperation and revision surgery for screw extraction can be overcome with the bioabsorbable bone screws. This study aims to use additive manufacturing (AM) technology to fabricate orthopaedic biodegradable cortical screws to reduce the bone-screw-related-complications.
Design/methodology/approach
The fused filament fabrication technology (FFFT)-based AM technique is used to fabricate orthopaedic cortical screws. The influence of various process parameters like infill pattern, infill percentage, layer height, wall thickness and different biological solutions were observed on the compressive strength and degradation behaviour of cortical screws.
Findings
The porous lattice structures in cortical screws using the rapid prototyping technique were found to be better as porous screws can enhance bone growth and accelerate the osseointegration process with sufficient mechanical strength. The compressive strength and degradation rate of the screw is highly dependent on process parameters used during the fabrication of the screw. The compressive strength of screw is inversely proportional to the degradation rate of the cortical screw.
Research limitations/implications
The present study is focused on cortical screws. Further different orthopaedic screws can be modified with the use of different rapid prototyping techniques.
Originality/value
The use of rapid prototyping techniques for patient-specific bone screw designs is scantly reported. This study uses FFFT-based AM technique to fabricate various infill patterns and porosity of cortical screws to enhance the design of orthopaedic cortical screws.
Details
Keywords
Pedram Parandoush, Palamandadige Fernando, Hao Zhang, Chang Ye, Junfeng Xiao, Meng Zhang and Dong Lin
Additively manufactured objects have layered structures, which means post processing is often required to achieve a desired surface finish. Furthermore, the additive nature of the…
Abstract
Purpose
Additively manufactured objects have layered structures, which means post processing is often required to achieve a desired surface finish. Furthermore, the additive nature of the process makes it less accurate than subtractive processes. Hence, additive manufacturing techniques could tremendously benefit from finishing processes to improve their geometric tolerance and surface finish.
Design/methodology/approach
Rotary ultrasonic machining (RUM) was chosen as a finishing operation for drilling additively manufactured carbon fiber reinforced polymer (CFRP) composites. Two distinct additive manufacturing methods of fused deposition modeling (FDM) and laser-assisted laminated object manufacturing (LA-LOM) were used to fabricate CFRP plates with continuous carbon fiber reinforcement. The influence of the feedrate, tool rotation speed and ultrasonic power of the RUM process parameters on the aforementioned quality characteristics revealed the feasibility of RUM process as a finishing operation for additive manufactured CFRP.
Findings
The quality of drilled holes in the CFRP plates fabricated via LA-LOM was supremely superior to the FDM counterparts with less pullout delamination, smoother surface and less burr formation. The strong interfacial bonding in LA-LOM proven to be superior to FDM was able to endure higher cutting force of the RUM process. The cutting force and cutting temperature overwhelmed the FDM parts and induced higher surface damage.
Originality/value
Overall, the present study demonstrates the feasibility of a hybrid additive and subtractive manufacturing method that could potentially reduce cost and waste of the CFRP production for industrial applications.
Details
Keywords
Rapid advances in ultrasonics have provided plant engineers with a powerful aid in the fight to control corrosion. This article outlines the principles, design and selection of…
Abstract
Rapid advances in ultrasonics have provided plant engineers with a powerful aid in the fight to control corrosion. This article outlines the principles, design and selection of ultrasonic gauges.
DURING some comments on the brain drain last month it was remarked that work study technologists stood on the periphery. Suddenly they have been moved right to the centre as the…
Abstract
DURING some comments on the brain drain last month it was remarked that work study technologists stood on the periphery. Suddenly they have been moved right to the centre as the result of a communication from Dr. Robert N. Lehrer. He is among the six American work study experts best known to the profession in this country, ranking with Barnes and Mundel as having contributed much to a right appreciation of the subject's value and its techniques.