Search results

This work is focused on the realization of copper parts using the material extrusion additive manufacturing debinding and sintering (MEX+D&S) technology.

A highly filled filament with 90 Wt.% of copper is used to realize nine different combinations varying the printing speed and the flow rate. The following thermal debinding and sintering are performed at 483 °C and 1057 °C, respectively, burying the samples in specific refractory powder and carbon. The green and sintered density are measured and an inspection at optical microscope is implemented for a detailed internal analysis of the defects.

The samples, that reported the highest values of the green density, become the worst in the sintered condition due to evident swelling defect generated by the entrapped polymer during the thermal debinding. On the other hand, the parts with the lower values of green density allowed to achieve a satisfying density value without significant external defects.

The realization of copper parts through laser-based additive manufacturing technologies shows several troubles related to the rapid heat transfer and the high reflectivity of copper, which is a hinder of the absorption of the laser power. The MEX+D&S becomes an easier and economical alternative for the realization of copper parts. The internal inspection of the samples revealed the need for the improvement on the process chain, adopting a different debinding process to open channels during the thermal debinding to avoid the entrapment of the polymer.

The Quality Assurance Agency (QAA) for Higher Education in the UK focuses on maintaining, enhancing and standardising the quality of higher education. Of significant impact are the development of subject benchmark statements (SBS) by the QAA, which describe the type and content of study along with the academic standards expected of graduates in specific disciplines. Prior to 2022, the QAA did not have a SBS to which higher education policing programmes could be directly aligned.

Over 12-months, a SBS advisory group with representatives from higher education across England, Scotland, Wales and Northern Ireland, The College of Policing, QAA, Police Federation of England and Wales and policing, worked in partnership to harness their collective professional experience and knowledge to create the first UK SBS for policing. Post publication of the SBS, permission was sought and granted from both the College of Policing and QAA for members of the advisory group to reflect in an article on their experiences of collaborating and working in partnership to achieve the SBS.

There is great importance of creating a shared vision and mutual trust, developed through open facilitated discussions, with representatives championing their cause and developing a collaborative and partnership approach to completing the SBS.

A collaborative and partnership approach is essential in developing and recognising the academic discipline of policing. This necessarily requires the joint development of initiatives, one of which is the coming together of higher education institutions, PSRBs and practitioner groups to collaborate and design QAA benchmark statements.

The SBS advisory group has further driven forward the emergence of policing as a recognised academic discipline to benefit multiple stakeholders.

The SBS for policing is the first across the UK. The authors experiences can be used to assist others in their developments of similar subject specific benchmarking or academic quality standards.

The purpose of this study is to modify the FDM 3D printer to print with polystyrene (PS) microspheres as the printing material, thus enabling bottom-up structural color printing and evaluating structural color printing.

This study chose a range of different heated bed temperatures to determine a suitable temperature for accelerating the self-assembly of photonic crystals and printing structural colors on various substrates. In addition, this study enhanced the structural color by doping PS microspheres with different contents of Acid Black 210 dye and evaluated the color-enhanced structural color by eye and spectrophotometer under different light sources.

The results show that the modified 3D printer can be used for structural color printing, and 50°C is determined as the heated bed temperature. There are significant differences in structural colors when printing under different color backgrounds and material substrates, and corresponding suitable substrates should be selected according to the application. The doping of PS microspheres with varying contents of dye results in different color levels of structural color. As with pigment colors, the visual perception of structural color varies when viewed under different light sources.

This paper proposes to print structural colors low-costly, analyze structural colors under substrate and light source conditions, and expand the structural color gamut by enhancing structural colors, which has positive implications for further research on structural colors as printing colors.

The purpose of this paper is to investigate the thermoelastic interactions in a homogeneous, transversely isotropic infinite medium with a spherical cavity in the context of two temperature Lord-Shulman (2TLS) generalized theory of thermoelasticity considering Eringen’s nonlocal theory and memory dependent derivative (MDD). Memory-dependent derivative is found to be better than fractional calculus for reflecting the memory effect which leads us to the current investigation.

The governing field equations of the problem are solved analytically using the eigenvalue approach in the transformed domain of Laplace when the cavity’s boundary is being loaded thermomechanically. Using MATLAB software the numerical solution in real space-time domain is obtained by Stehfest method.

Numerical results for the different thermophysical quantities are presented in graphs and the effects of delay time parameter, non-local parameter and two temperature parameters are studied thereafter. The outcomes of this study convince that the displacement u, conductive temperature ϕ, thermodynamic temperature θ are concave upward whereas radial stress τ_rr is concave downward for every choice of delay time parameter ω, two temperature parameter η and non-local parameter “ζ”. As a specific instance of our findings, the conclusions of an equivalent problem involving integer order thermoelasticity theory can be obtained, and the corresponding results of this article can be readily inferred for isotropic materials.

The novelty of this research lies in the adoption of generalized thermoelastic theory with memory dependent derivative and Eringen’s nonlocality for analyzing the thermoelastic interactions in an infinite body with spherical cavity by employing eigenvalue approach. It has applications to many thermo-dynamical systems.

This paper aims to analyse the current state of research to identify the link between Lean Manufacturing and Industry 4.0 (I4.0) technologies to map out different research themes, to uncover research gaps and propose key recommendations for future research, including lessons to be learnt from the integration of lean and I4.0.

A systematic literature review (SLR) is conducted to thematically analyse and synthesise existing literature on Lean Manufacturing–I4.0 integration. The review analysed 60 papers in peer-reviewed journals.

In total, five main research themes were identified, and a thematic map was created to explore the following: the relationship between Lean Manufacturing and I4.0; Lean Manufacturing and I4.0 implication on performance; Lean Manufacturing and I4.0 framework; Lean Manufacturing and I4.0 integration with other methodologies; and application of I4.0 technologies in Lean Manufacturing. Furthermore, various gaps in the literature were identified, and key recommendations for future directions were proposed.

The integration of Lean Manufacturing and I4.0 will eventually bring many benefits and offers superior and long-term competitive advantages. This research reveals the need for more analysis to thoroughly examine how this can be achieved in real life and promote operational changes that ensure enterprises run more sustainably.

The development of Lean Manufacturing and I4.0 integration is still in its infancy, with most articles in this field published in the past two years. The five main research themes identified through thematic synthesis are provided in the original contribution. This provides scholars better insight into the existing literature related to Lean Manufacturing and I4.0, further contributing to defining clear topics for future research opportunities. It also has important implications for industrialists, who can develop more profound and richer knowledge than Lean and I4.0, which would, in turn, help them develop more effective deployment strategies and have a positive commercial impact.

The purpose of this paper is to examine the factors that influence Saudi Arabian users’ intentions to continue using fintech payment applications and their satisfaction with these applications.

The unified theory of acceptance and use of technology 2 and DeLone and McLean’s IS success model were integrated to provide a comprehensive framework. A questionnaire was distributed to 401 users of fintech payment applications, and the data collected was analysed using structural equation modelling to test the hypotheses.

The results reveal that factors such as social influence, price value and habit have a positive influence on the continued desire to use fintech payment applications, that the performance expectancy is positively influenced by the level of effort expectancy. Additionally, the quality of the system, service and information provided by the applications has a direct association with user satisfaction, as indicated by the IS Success Model. Moreover, it was observed that customer satisfaction with fintech payment applications positively affects their intention to continue using them.

This study addresses an important gap in the existing literature by examining the factors influencing Saudi Arabian consumers’ intentions to sustain the usage of fintech payment applications. Despite governmental support for the industry, understanding consumer behaviour and satisfaction with these applications remains limited, making this research timely and valuable.

This study aims to address the limited understanding of the complex correlations among strut size, structural orientation and process parameters in selective laser melting (SLM)-fabricated lattice structures. By investigating the effects of crucial process parameters, strut diameter and angle on the microstructure and mechanical performance of AlSi10Mg struts, the research seeks to enhance the surface morphologies, microstructures and mechanical properties of AM lattice structures, enabling their application in various engineering fields, including medical science and space technologies.

This comprehensive study investigates SLM-fabricated AlSi10Mg strut structures, examining the effects of process parameters, strut diameter and angle on densification behavior and microstructural characteristics. By analyzing microstructure, geometrical properties, melt pool morphology and mechanical properties using optical microscopy, scanning electron microscope, energy dispersive X-ray spectroscopy and microhardness tests, the research addresses existing gaps in knowledge on fine lattice strut elements and their impact on surface morphology and microstructure.

The study revealed that laser energy, power density and strut inclination angle significantly impact the microstructure, geometrical properties and mechanical performance of SLM-produced AlSi10Mg struts. Findings insight enable the optimization of SLM process parameters to produce lattice structures with enhanced surface morphologies, microstructures and mechanical properties, paving the way for applications in medical science and space technologies.

This study uniquely investigates the effects of processing parameters, strut diameter and inclination angle on SLM-fabricated AlSi10Mg struts, focusing on fine lattice strut elements with diameters as small as 200 µm. Unlike existing literature, it delves into the complex correlations among strut size, structural orientation and process parameters to understand their impact on microstructure, geometrical imperfections and mechanical properties. The study provides novel insights that contribute to the optimization of SLM process parameters, moving beyond the typically recommended guidelines from powder or machine suppliers.

This study aims to assess the effect of both apigenin-loaded zinc oxide nanoparticles (ZnONPs) and apigenin only against cisplatin (CP)-induced experimental cardiotoxicity.

A total of 32Wister rats (male) were randomly divided (n = 8) into four groups. Normal control group, CP group received CP (20 mg/kg); treated group I received CP and then received apigenin (0.78 mg/kg/day) orally; treated group II received CP and then received apigenin loaded ZnONPs. At the end of the experiment (10 days), samples were extracted from each rat for the assessment of complete blood picture, lipid profile, atherogenic indices, oxidative status, inflammatory and cardiotoxicity markers as well as histological examination.

The results indicated that CP produced significant alterations in the complete blood picture, lipidemic profile, atherogenic indices, antioxidation capacity and cardiac inflammatory markers as well as function enzymes as compared with the control group. Administration of apigenin only showed a non-significant change in the atherogenic indices, oxidative status and cardiotoxicity parameters, indicating incomplete cardio-protection against CP upon. Additionally, all the observed alterations in CP group were reversed when apigenin nanoparticle at lower dose was used with ZnONPs which was also confirmed by histopathological investigation.

The apigenin loaded ZnONPs exert protective effects against CP-induced experimental cardiotoxicity and improved cardiac function, suggesting a potential adjuvant role of apigenin nanoparticles against cardiotoxicity.

The aim of this study is to gauge the consideration toward sustainability and sustainable development in the creative process or activities in design practices among the design undergraduates of University A, Russia, and University B, Malaysia. The beliefs, attitudes and intentions toward all the dimensions of sustainability – environmental, social and economic – were assessed and compared between both institutions.

A questionnaire was administrated to 127 design undergraduates from University A, Russia, and 135 design undergraduates from University B, Malaysia, to assess their beliefs, attitudes and intentions toward sustainability and sustainability development in their creative practices.

The outputs of this investigation suggested that the courses related to education for sustainable development that preached in design programs at University A, Russia, have developed appropriate beliefs, attitudes and intentions toward sustainability and sustainable development in creative process or activities among the learners on environmental and social sustainability issues. The subject on sustainable development offered in design programs at University B, Malaysia, has mold positive beliefs, attitudes and intentions on the environmental sustainability issues in creative practices among the design undergraduates. The outcomes of this study shed some light on the effectiveness of the courses related to education for sustainable development of both institutions in building the appropriate mindset in the creative process during design activities.

This study on the consideration of sustainability and sustainable development in creative practices is novel and the outputs of this study can carve the path for an effective education for sustainable development courses in the design programs, specifically in the context of building the appropriate beliefs, attitudes and intentions toward sustainability and sustainable development in creative practices among the future designers.

A popular convention in the political-economy literature is that causality runs from democracy to economic growth. That thinking has continued to evoke significant debates among scholars. This study aims to propose a new research experiment by investigating whether macroeconomic variables cause democratisation.

The study uses a panel data set of 48 carefully selected economies in Sub-Saharan Africa spanning 1991 to 2020 and uses the PVAR system generalised method of moment (GMM) approach.

With the application of three macroeconomic indicators: economic growth, full employment and balance of payment equilibrium, the study suggests that economic growth has a negative implication on the democratisation process and that the incentives that increase national income provide in the global South enable autocratic rulers to impede democratic growth. The Granger causality test demonstrates a unidirectional effect from economic growth to democracy. The eigenvalue stability condition, impulse response function and forecast-error variance decomposition all confirmed the validity of the findings with the PVAR system GMM. Finally, the study proposed policy and theoretical implications for the political stakeholders.

Robust development of economic institutions (particularly the anti-corruption and rule of law) in the global South is required to tame the potential for the state actors to turn public resources into personal use to further their parochial political interest in the form of perpetuating themselves in office which negates the ideals of democracy and social norms. Strong institutions could prevent the misuse of national income and enhance a good quality of life for the citizenry, making them grow confidence in the democratisation process.

The research paper makes an insightful contributions from the methodological perspective and the sampling perspective. The author uses a new research method, the PVAR system GMM becoming the first attempt of such a method to be applied in determining the causal effects of macroeconomic variables on democracy in the literature. Another relevant contribution of the study relates to the sample technique of selecting economies from the Sub-Saharan Africa with notable weak or slow democratisation process.