Search results

Thermomechanical behavior of intermediate-size beam-to-wall assemblies including Glulam-beams connected to cross-laminated timber (CLT) walls with T-shape steel doweled connections was investigated at ambient temperature (AT) and after and during non-standard fire exposure.

Three AT tests were conducted to evaluate the load-carrying capacity and failure modes of the assembly at room temperature. Two post-fire performance (PFP) tests were performed to study the impact of 30-min (PFP30) and 60-min (PFP60) partial exposure to a non-standard fire on the residual strength of the assemblies. The assemblies were exposed to fire in a custom-designed frame, then cooled and loaded to failure. A fire performance (FP) test was conducted to study the fire resistance (FR) during non-standard fire exposure by simultaneously applying fire and a mechanical load equal to 65% of the AT load carrying capacity.

At AT, embedment failure of the dowels followed by splitting failure at the Glulam-beam and tensile failure of the epoxy between the layers of CLT-walls were the dominant failure modes. In both PFP tests, the plastic bending of the dowels was the only observed failure mode. The residual strength of the assembly was reduced 14% after 30 min and 37% after 60 min of fire exposure. During the FP test, embedment failure of timber in contact with the dowels was the only major failure mode, with the maximum rate of displacement at 51 min into the fire exposure.

This is the first time that the thermomechanical performance of such an assembly with a full-contact connection is presented.

3-ply cross-laminated timber (CLT) is used to investigate the thermo-mechanical performance of intermediate-size assemblies comprised of T-shaped welded slotted-in steel doweled connections and CLT beams at ambient temperature (AT), after and during non-standard fire exposure.

The first set of experiments was performed as a benchmark to find the load-carrying capacity of the assembly and investigate the failure modes at AT. The post-fire performance (PFP) test was performed to investigate the residual strength of the assembly after 30-min exposure to a non-standard fire. The fire-performance (FP) test was conducted to investigate the thermo-mechanical behavior of the loaded assembly during non-standard fire exposure. In this case, the assembly was loaded to 67% of AT load-carrying capacity and partially exposed to a non-standard fire for 75 min.

Embedment failure and plastic deformation of the dowels in the beam were the dominant failure modes at AT. The load-carrying capacity of the assembly was reduced to 45% of the ambient capacity after 30 min of fire exposure. Plastic bending of the dowels was the principal failure mode, with row shear in the mid-layer of the CLT beam and tear-out failure of the header sides also observed. During the FP test, ductile embedment failure of the timber in contact with the dowels was the major failure mode at elevated temperature.

This paper presents for the first time the thermo-mechanical performance of CLT beam-to-girder connections at three different thermal conditions. For this purpose, the outside layers of the CLT beams were aligned horizontally.

1. Load-carrying capacity and failure modes of CLT beam-to-girder assembly with T-shaped steel doweled connections at ambient temperature presented.

2. Residual strength and failure modes of the assembly after 30-min partially exposure to the non-standard fire provided throughout the post-fire performance test.

3. Fire resistance of the assembly partially exposed to the non-standard fire highlighted.

Load-carrying capacity and failure modes of CLT beam-to-girder assembly with T-shaped steel doweled connections at ambient temperature presented.

Residual strength and failure modes of the assembly after 30-min partially exposure to the non-standard fire provided throughout the post-fire performance test.

Fire resistance of the assembly partially exposed to the non-standard fire highlighted.

Brazil uses the dollar as a vehicle currency to invoice its exports. This fact produces a tendency toward equalizing the prices of products in dollars in the international market and reducing the ability of firms to practice pricing-to-market (PTM). This study aims to evaluate the hypothesis by estimating error correction models in panel data, obtaining estimates of PTM for 25 manufacturing products exported by Brazil between 2010 and 2020.

This study uses the correlated common effect estimator proposed by Pesaran (2006) and Chudik and Pesaran (2015b) to estimate the PTM coefficients.

Results of this study indicate that exporters practice local-currency pricing stability for dollar prices. This study obtains that Brazilian exporters tend to stabilize their dollar price for exports, reducing heterogeneity between destination markets. The results are in agreement with the hypothesis of the prevalence of the coalescing effect of Goldberg and Tille (2008) and lower sensitivity of the markup adjustment to the specific market, as pointed out by Corsetti et al. (2018). The pricing of Brazilian exports in dollars reflects a profit maximization strategy that considers an international price system based on global demand for products.

In addition to analyzing the dollar role in the pricing of Brazilian exports through the triangular decomposition, this study also shows the importance of examining the cross-section dependence of errors, considering the heterogeneous cointegration in export pricing models and producing PTM estimates for short-term and long-term.

The purpose of this paper is to examine the purchase behavior of consumers towards green products by adapting and extending the theory of planned behavior with the inclusion of three pertinent environmental factors posited to reflect environmental consciousness in the form of environmental concern, environmental knowledge and environmental values.

The data was collected from 410 consumers at shopping malls with retail stores selling green and non-green products in a developing country using cluster sampling and analyzed using covariance-based structural equation modeling.

The findings of this study indicate that environmental factors reflecting environmental consciousness positively influence consumers’ attitude towards purchasing green products, wherein consumers’ environmental values have a stronger influence than their environmental concern and environmental knowledge. The findings also reveal that subjective norm, attitude and perceived behavioral control toward purchasing green products positively shape green purchase intention. The same positive effect is also witnessed between green purchase intention and behavior. However, perceived behavioral control towards purchasing green products had no significant influence on green purchase behavior.

This study suggests that green marketers should promote environmental consciousness among consumers to influence and shape their planned behavior towards green purchases. This could be done by prioritizing efforts and investments in inculcating environmental values, followed by enhancing environmental knowledge and finally inducing environmental concern among consumers. Green marketers can also leverage subjective norm and perceptions of behavioral control toward purchasing green products to reinforce green purchase intention, which, in turn, strengthens green purchase behavior. This green marketing strategy should also be useful to address the intention–behavior gap as seen through the null effect of perceived behavioral control on purchase behavior toward green products when this strategy is present.

This study contributes to theoretical generalizability by reaffirming the continued relevance of the theory of planned behavior in settings concerning the environment (e.g. green purchases), and theoretical extension by augmenting environmental concern, environmental knowledge and environmental values with the theory of planned behavior, resulting in an environmentally conscious theory of planned behavior. The latter is significant and noteworthy, as this study broadens the conceptualization and operationalization of environmental consciousness from a unidimensional to a multidimensional construct.

The potential growth in cryptocurrencies has raised serious ethical and religious issues leading to a new investment rethinking. This paper aims to identify the influence of religiosity on cryptocurrency acceptance through an extended technology acceptance model (TAM) model.

In the first phase, this research develops a conceptual model that extends the theory of the TAM by integrating the religiosity component. In the second phase, the proposed model is tested using search volume queries in daily frequencies from 01/01/2018 to 31/12/2022 and structural equation modeling (SEM).

The empirical results demonstrate a significant positive effect of religiosity on the intention to use cryptocurrency, the users' perceived usefulness (PU) and ease of use (PEOU). Besides, the authors note that PEOU positively influences the intention. Furthermore, religiosity indirectly affects the intention through the PEOU and positively impacts the intention through the PU. In the same way, PEOU has a considerable indirect effect on the intention through PU.

This study has practical and theoretical contributions by providing insights into the cryptocurrency acceptance factors. In other words, it contributes to the literature by extending TAM models. Practically, it helps managers determine factors affecting the intention to use cryptocurrencies. Therefore, they can adjust their industry according to the suitable characteristics for creating successful projects.

Identifying the effect of religiosity on cryptocurrency users' choices and decisions has a social added value as it provides an understanding of the evolution of psychological variants.

The findings emphasize the importance of integrating big data to analyze users' attitudes. Besides, most studies on cryptocurrency acceptance are investigated based on one kind of religion, such as Christianity or Islam. Nevertheless, this paper integrates the effect of five types of faith on the users' intentions.

The purpose of this study is to examine how informational faultlines on a board affect the management of knowledge owned by directors and the consequences on organizational performance. In this study, informational faultlines are defined as hypothetical lines that divide a group into relatively homogeneous subgroups based on the alignment of several informational attributes among board members.

The study uses unique hand-collected panel data covering 7,247 board members at 106 publicly traded firms to provide strong support for the hypothesized U-shaped relationship. The authors use a fixed effects approach and a system generalized method of moments approach to test the hypothesis.

The study finds that the relationship between informational faultlines on a board and organizational performance is U shaped, with the least optimal organizational performance experienced when boards have moderate informational faultlines. More specifically, informational faultlines within boards are negatively related to organizational performance across the weak-to-moderate range of informational faultlines and positively related to organizational performance across the moderate-to-strong range.

By explaining the mechanisms through which informational faultlines are related to organizational performance, the authors contribute to the literature in a number of ways. By conceptualizing how the management of knowledge plays an important role in the particular setting of corporate boards, the authors add not only to literature on knowledge management but also to the faultline and corporate governance literature.

This study offers a rationale for prior mixed findings by providing an alternative theoretical basis to explain the effect of informational faultlines within boards on organizational performance. To advance the field, the authors build on the concept of knowledge demonstrability to illuminate how informational faultlines affect the management of knowledge within boards, which will translate to organizational performance.