Search results

This study aims to investigate the effects of organizational culture factors on the selection of software process development models and develops a conceptual model for selecting and adopting process development models with an organizational culture approach, using 12 criteria and their sub-criteria defined in Fey and Denison’s model (12 criteria).

The research hypotheses were investigated using statistical analysis, and then the criteria and sub-criteria were selected based on Fey and Denison’s model and the experts’ viewpoints. Afterward, the organizational culture of the selected company was measured using the data from 2016 and 2017, based on Fey and Denison’s questionnaire. Due to the correlation between the criteria, using the decision-making trial and evaluation technique, the correlation between sub-criteria were determined, and by analytical network process method and using Super-Decision software, the process development model was preferred to the 12 common models in information systems development.

Results indicated a significant and positive effect of organizational culture factors (except the core values factor) on the selection of development models. Also, by changing the value of organizational culture, the selected process development model changed either. Sensitivity analysis performed on the sub-criteria implied that by changing and improving some sub-criteria, the organization will be ready and willing to use the agile or risk-based models such as spiral and win-win models. Concerning units where the mentioned indicators were at moderate and low limits, models such as waterfall, V-shaped and incremental worked more appropriately.

While many studies were performed in comparing development models and investigating their strengths and weaknesses, and the impact of organizational culture on the success of information technology projects, literature indicated that the impact of organizational sub-culture prevailing in the selection of development process models has not been investigated. In this study, new factors and indicators were addressed affecting the selection of development models with a focus on organizational culture. Correlation among the factors and indicators was also investigated and, finally, a conceptual model was proposed for proper adoption of the models and methodologies of system development.

This paper aims to introduce a model using a digital twin concept in a cold heading manufacturing and develop a digital visual management (VM) system using Lean overall equipment effectiveness (OEE) tool to enhance the process performance and establish Fourth Industrial Revolution (I4.0) platform in small and medium enterprises (SMEs).

This work utilised plan, do, check, act Lean methodology to create a digital twin of each machine in a smart manufacturing facility by taking the Lean tool OEE and digitally transforming it in the context of I4.0. To demonstrate the effectiveness of process digitisation, a case study was carried out at a manufacturing department to provide the data to the model and later validate synergy between Lean and I4.0 platform.

The OEE parameter can be increased by 10% using a proposed digital twin model with the introduction of a Level 0 into VM platform to clearly define the purpose of each data point gathered further replicate in projects across the value stream.

The findings suggest that researchers should look beyond conversion of stored data into visualisations and predictive analytics to improve the model connectivity. The development of strong big data analytics capabilities in SMEs can be achieved by shortening the time between data gathering and impact on the model performance.

The novelty of this study is the application of OEE Lean tool in the smart manufacturing sector to allow SME organisations to introduce digitalisation on the back of structured and streamlined principles with well-defined end goals to reach the optimal OEE.

The purpose of this paper is to investigate the distribution characteristics of airflow in mine ventilation suits with different pipeline structures when the human body is bent at various angles. On this basis, the stress points are extracted to investigate the pressure variation of a ventilation suit under different ventilation rates and pipeline structures.

Based on the three-dimensional human body scanner, portable pressure test and other instruments, a human experiment was conducted in an artificial cabin. The study analyzed and compared the distribution characteristics of clearance under three different pipeline structures, as well as the pressure variation of the ventilation suit.

The study found that the clearance in front of two pipeline structures gradually increased in size as the degree of bending increased, and there was minimal clearance in the chest and back. The longitudinal structure exhibits a significant decrease in clearance compared to the spiral structure. The pressure value of the spiral pipeline structure with the same ventilation volume is low, followed by the transverse structure, while the longitudinal structure has the highest pressure value. The increase in clothing pressure value of a spiral pipeline structured ventilation suit with varying ventilation volumes is minimal.

The ventilation suit has a promising future as a type of personal protective equipment for mitigating heat damage in mines. It is of great value to study the pipeline structure of the ventilation suit for human comfort.

The purpose of this paper is to compile a comprehensive status report on pipes/piping networks across different industrial sectors, along with specifications of materials and sizes, and showcase welding avenues. It further extends to highlight the promising friction stir welding as a single solid-state pipe welding procedure. This paper will enable all piping, welding and friction stir welding stakeholders to identify scope for their engagement in a single window.

The paper is a review paper, and it is mainly structured around sections on materials, sizes and standards for pipes in different sectors and the current welding practice for joining pipe and pipe connections; on the process and principle of friction stir welding (FSW) for pipes; identification of main welding process parameters for the FSW of pipes; effects of process parameters; and a well-carved-out concluding summary.

A well-carved-out concluding summary of extracts from thoroughly studied research is presented in a structured way in which the avenues for the engagement of FSW are identified.

The implications of the research are far-reaching. The FSW is currently expanding very fast in the welding of flat surfaces and has evolved into a vast number of variants because of its advantages and versatility. The application of FSW is coming up late but catching up fast, and as a late starter, the outcomes of such a review paper may support stake holders to expand the application of this process from pipe welding to pipe manufacturing, cladding and other high-end applications. Because the process is inherently inclined towards automation, its throughput rate is high and it does not need any consumables, the ultimate benefit can be passed on to the industry in terms of financial gains.

To the best of the authors’ knowledge, this is the only review exclusively for the friction stir welding of pipes with a well-organized piping specification detailed about industrial sectors. The current pipe welding practice in each sector has been presented, and the avenues for engaging FSW have been highlighted. The FSW pipe process parameters are characteristically distinguished from the conventional FSW, and the effects of the process parameters have been presented. The summary is concise yet comprehensive and organized in a structured manner.

The purpose of this paper is to provide an overview of what (service) experience is and examine it using three distinct perspectives: customer experience (CX), employee experience (EX) and human experience (HX).

The present conceptualization blends the marketing and organizational behavior/human resources management (OB/HRM) disciplines to clarify and reflect over the meaning of (service) experience. The marketing discipline illuminates the concept of CX, whereas the OB/HRM discipline illuminates the concept of EX. The concept of HX, which transcends CX and EX, is examined in light of its recent development in service research. For each of the three concepts, key themes are identified, and future research directions are proposed.

Because the goal that individuals seek to achieve depends on the role they are enacting, each of the three perspectives on experience (CX, EX and HX) should have a different focal point. CX requires to focus on the process of solving customer goals. EX necessitates to think in terms of organizational context and job content that support employees. Finally, the focus of HX should be on well-being via enhanced gratification, and reduced violation, of basic human needs.

This paper offers an interdisciplinary perspective on (service) experience and simultaneously addresses CX, EX and HX in order to reconcile the different perspectives on experience in service research.

This study aims to research the influence mechanism of microtextured geometric parameters of dry gas seal end face on the tribological behavior under dry frictional conditions.

The microtexture was processed using laser processing, while the diamond-like carbon (DLC) film was applied through magnetron sputtering; the experimental platform of friction vibration was established, the frictional and vibrational properties of different geometric parameters were tested; the data signals of vibrational acceleration and frictional torque were collected and processed using data acquisition instrument. The entropy characteristic parameters of 3D vibrational acceleration were extracted based on wavelet packet decomposition method. The end-face topography was measured with ST400 three-dimensional noncontact surface topography instrument.

The geometry of pits plays a key role in influencing friction performance; the permutation entropy and fuzzy entropy of the vibration acceleration signal changed with variations in microtextured parameters. A textured surface with appropriately size parameters can trap debris, enhance the dynamic pressure effect, reduce impact between the friction interfaces and improve the frictional vibrational performance. In this research, microtextured surface with Φ150 µm-10% and Φ200 µm-5% can effectively reduce friction and vibration between the end faces of a dry gas seal.

DLC film improves the hardness of seal ring end face, and microtexture improves the dynamic effect; the tribological behavior monitoring can be realized by analyzing the characteristics of vibration acceleration sensitive parameter with friction state. The findings will provide a basis for further research in the field of tribology and the microtexture optimization of dry gas seal ring end face.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2023-0389/

Though the concept of work engagement has been extensively explored in the academic literature, however, with engagement levels declining globally – causing hike in undesired employee attitudes and behaviours – there is a need to revisit its antecedents and consequences that bear higher current relevance. Within the context of the Indian information technology (IT) sector, this study aims to explore the role of job security and value congruence as two critical antecedents which not only lead to increased engagement levels but also consequently yield the enhanced perception of change, amplified general life satisfaction and reduced intent to leave among employees.

Data were collected from 363 software developers (SDs) in India using the survey questionnaire method and structured equation modelling was used to test the proposed measurement and structural model. The results supported the proposed hypotheses and confirmed the role of work engagement as a mediator between the studied antecedents and consequences.

Results from a study of 363 SDs across India support the proposed hypotheses and confirm the role of work engagement as a mediator between the studied antecedents and consequences.

This study was cross-sectional; therefore, caution is necessary while making any causal inferences. Further work based on longitudinal data would strengthen these findings.

The findings of the study will provide the decision-makers of IT companies with tools to increase engagement among SDs thereby increasing favorable outcomes for organizations and individual employees in the current times.

The study establishes job security and value congruence, as two critical yet cost-effective measures that today’s organization need to integrate into its human resources functions not just to boost employee engagement levels but also to control spiraling costs due to unintended turnover, employee’s resistance of organizational changes and employee ill-being. Future research avenues and practical implications have been discussed.

This paper aims to examine the relationship between workplace toxicity and psychological capital (PsyCap). It also investigates the moderating role of gratitude in the toxicity–PsyCap link.

The study is based on explorative-cum-descriptive research design. The sample comprises 411 employees engaged in banking, insurance, IT, automobile and oil and gas companies. The collected data is explored for reliability, validity, multicollinearity and common method variance estimates. Also, the relationship between workplace toxicity and PsyCap and the moderating effect of gratitude are examined using structural equation modelling.

The findings report a negative association between toxicity and PsyCap. Also, the study concludes a significant moderating effect of gratitude. The study recommends the institutionalisation of a gratitude-based organisation to reduce the impact of workplace bullying and uncivil behaviour.

The study is based on primary data and one of the few studies that explore psychological capital as a dependent variable, which is influenced by toxic behaviours at work.

This paper aims to explore how the owners of less competitive micro-firms (MFs) perceive the “crisis–innovation–change management” triangle. It examines whether their understanding of these overarching entrepreneurship theory principles is inadequate compared to the relevant scientific literature.

This qualitative analysis follows principles based on the inductive method and grounded theory, thickly describing the results from research conducted in a sample of 38 tertiary-sector MFs in the Eastern Macedonia and Thrace region – one of the least developed and competitive areas across Europe. It triangulates the data with 11 respective small firms.

MF owners perceive the crisis as an ostensibly exogenous phenomenon, innovation as something quasi-unattainable – although vaguely significant – and change management as a relatively unknown process. This understanding lies somewhat distant from the extant literature that examines the structural nature of crises, the innovational power to exit profound restructurings and the rebalancing requisite for building new overall organizational methods to survive this internal–external transformation. In essence, the triangle crisis–innovation–change management is a blind spot for the examined MF owners as they ignore its significance as an adaptation mechanism – contrary to several direct competitors.

Based on the reluctance of these individuals to cultivate their systematic business knowledge, it seems unrealistic that they would seek to pay the necessary high price for business consulting in the future. An ideal solution would be to build public entrepreneurship clinics to provide these less dynamic and adaptable organizations with free preliminary or in-depth counseling. The Institute of Local Development-Innovation could aim to provide free consulting services to reinforce organizational physiology by coordinating different socioeconomic actors.

To the best of our knowledge, this empirical research is one of the first to test the comprehension of weaker MFs – less competitive and developed in organizational terms – to the triangle crisis–innovation–change management.

This study aims to understand workplace conflict outcomes (WCO) literature and identify the research gaps by mapping its knowledge base and theoretical evolution.

This study combines bibliometric and qualitative analysis and encompasses 1,043 Scopus-indexed documents published between 1972 and 2022. The bibliometric analysis used VOSviewer, Excel and Tableau software for descriptive statistics, citation and co-citation analyses of publication patterns, authors, documents and journals. The qualitative analysis critiqued main theoretical perspectives and topical interests.

This study revealed a significant increase in literature after 2000, with authors representing 70 societies, primarily the USA, China, Australia, Canada and the Netherlands. Influential authors and their canonical articles were identified, including Jehn, De Dreu, Spector, Amason and Pelled. Highly cited articles focused on task, relationship, role and process conflict. Four main theoretical schools were categorized: conflict type paradigm, individual differences, conflict cooccurrence and conflict dynamics. Influential journals spanned psychology, management, negotiation and decision-making and business and marketing fields, including JAP, AMJ, ASQ, JM, JOB, AMR, IJCMA and OS.

This study provides implications for future bibliometric analyses, theoretical and empirical studies, practitioners and society based on its quantitative and qualitative findings.

To the best of the authors’ knowledge, this study represents the first bibliometric review of WCO literature, serving as a baseline for tracking the field’s evolution and theoretical advancements.