Search results

Purpose: This chapter aims to evaluate the significant impact of Gandhian values on sustainable consumption behaviour (SCB) by applying the value-attitude-behaviour (VAB) framework. This chapter contributes by incorporating Gandhian values as one influencing factor for SCB.

Need for the Study: Values are considered as guiding principles in people’s lives. Studies suggest that values and other social and psychological factors can be vital in determining consumers’ behaviour towards sustainable consumption. There needs to be more empirical research on consumer behaviour facets of sustainable consumption for markets in India.

Methodology: The study uses partial least square structural equation modelling to empirically test proposed hypotheses and the research model of the relationship. The study results are based on data collected by administering a survey through a questionnaire confined to India.

Findings: The results indicated that Gandhian values, attitude, and sustainable consumption intention significantly influence SCB. Intention acts as a mediator between both outward and inward environmental attitudes and behaviour. The study provides directions for further research.

Practical Implications: This research study is helpful for researchers, marketers, and policymakers.

This study aims to propose a refined dynamic network slacks-based measure (DNSBM) to evaluate the efficiency of China's regional green innovation system which consists of basic research, applied research and commercialization stages and explore the influencing factors of the stage efficiency.

A two-step procedure is employed. The first step proposes an improved DNSBM model with flexible settings of stages' input or output efficiency and uses second order cone programming (SOCP) to solve the non-linear problem. In the second step, least absolute shrinkage and selection operator (LASSO) and Tobit models are used to explore the influencing factors of the stage efficiency. Global Dynamic Malmquist Productivity Index (GDMPI) and Dagum Gini coefficient decomposition method are introduced for further discussion of the productivity change and regional differences.

On average, Chinese provincial green innovation efficiency should be improved by 24.11% to become efficient. The commercialization stage outperforms the stages of basic research and applied research. Comparisons between the proposed model and input-oriented, output-oriented and non-oriented DNSBM models show that the proposed model is more advanced because it allows some stages to have output-oriented model characteristics while the other stages have input-oriented model characteristics. The examination of the influencing factors reveals that the three stages of the green innovation system have quite diverse influencing factors. Further discussion reveals that Chinese green innovation productivity has increased by 39.85%, which is driven mainly by technology progress, and the increasing tendency of regional differences between northern and southern China should be paid attention to.

This study proposes an improved dynamic three-stage slacks-based measure (SBM) model that allows calculating output efficiency in some stages and input efficiency in the other stages with the application of SOCP approach. In order to capture productivity change, this study develops a GDMPI based on the DNSBM model. In practice, the efficiency of regional green innovation in China and the factors that influence each stage are examined.

This study aims to reveal the tribological mechanism of synergistic effect between MoDTC and P-containing additives in aluminum-based grease.

The authors prepared a molybdenum dialkyl dithiocarbamate (MoDTC) and revealed the tribological mechanism of synergistic effect between MoDTC and P-containing additives in aluminum-based grease by combining with ZDDP and P-containing and S-free additives.

The MoDTC the authors prepared has good friction-reducing and anti-wear properties in aluminum-based grease and has an obvious synergistic effect with ZDDP. MoDTC and ZDDP have a significant synergistic effect on the tribological properties in aluminum-based grease, mainly because of the formation of phosphates and metaphosphates as well as more MoS₂ in the friction film. P element plays a facilitating role in the chemical conversion of MoDTC to MoS₂.

The experiments of MoDTC with tributyl phosphate and trimethylphenyl phosphate confirm that the P element plays a facilitating role in the chemical conversion of MoDTC into MoS₂.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2023-0410

This paper aims to investigate the ability of traditional biopolymers, such as funori or the nanoscale form of cellulose nanocrystals, to consolidate fragile paper and preserve it for as long as possible.

Degraded papers dating back two centuries were separated into paper samples for consolidation processes. Funori – a marine spleen – was used as a traditional consolidation material and a mixture with ZnO NPs compared with modern materials, such as cellulose nanocrystals. The samples were aged for 25 years, examinations and analyses were performed using scanning electron microscopy and color change was assessed using the CIELAB system, X-ray diffraction and Fourier-transform infrared spectroscopy.

According to the results, using traditional materials to consolidate damage, such as funori, after aging resulted in glossiness on the surface, a color change and increased water content and oxidation. Furthermore, samples treated with a mixture of ZnO NPs and funori revealed that the mixture improved the sample properties and increased the degree of crystallization. Cellulose nanocrystals improved the surface, filled gaps, formed bridges between the fibers and acted as a protector from aging effects.

This paper highlights the ability of nanomaterials to enhance the properties of materials as additives and treat the paper manuscripts from weaknesses.

This paper aims to evaluate the effects of banana (Musa) peel and guava (Psidium guajava) leaves extract as mordants on jute–cotton union fabrics dyed with onion skin extract as a natural dye.

The dye was extracted from the outer skin of onions by boiling in water and later concentrated. The bio-mordants were prepared by maceration using methanol and ethanol. The fabrics were pre-mordanted, simultaneously mordanted and post-mordanted with various concentrations according to the weight of the fabric. The dyed and mordanted fabrics were later subjected to measurement of color coordinates, color strength and colorfastness to the washing test. Furthermore, the dyed samples were characterized by Fourier transform infrared, and different chemical bonds were analyzed by X-ray photoelectron spectroscopy analysis.

Significant improvement was obtained in colorfastness and color strength values in various instances using banana peel and guava leaves as bio mordants. Post-mordanted with banana peel provided the best results for wash fastness. Better color strength was achieved by fabric post-mordanted with guava leave extracts.

Sustainable dyeing methods of natural dyes using banana peel and guava leaves as bio mordants were explored on jute–cotton union fabrics. Improvement in colorfastness and color strength for various instances was observed. Thus, this paper provides a promising alternative to metallic salt mordants.

This study aims to investigate the behavior of the green biomass-derived copper (lignin/silica/fatty acids) complex, copper lignin/silica/fatty acids (Cu-LSF) complex, when incorporated into the nonpolar ethylene propylene diene (EPDFM) rubber matrix, focusing on its reinforcing and antioxidant effect on the resulting EPDM composites.

The structure of the prepared EPDM composites was confirmed by Fourier-transform infrared spectroscopy, and the dispersion of the additive fillers and antioxidants in the EPDM matrix was investigated using scanning electron microscopy. Also, the rheometric characteristics, mechanical properties, swelling behavior and thermal gravimetric analysis of all the prepared EPDM composites were explored as well.

Results revealed that the Cu-LSF complex dispersed well in the nonpolar EPDM rubber matrix, in thepresence of coupling system, with enhanced Cu-LSF-rubber interactions and increased cross-linking density, which reflected on the improved rheological and mechanical properties of the resulting EPDM composites. From the various investigations performed in the current study, the authors can suggest 7–11 phr is the optimal effective concentration of Cu-LSF complex loading. Interestingly, EPDM composites containing Cu-LSF complex showed better antiaging performance, thermal stability and fluid resistance, when compared with those containing the commercial antioxidants (2,2,4-trimethyl-1,2-dihydroquinoline and N-isopropyl-N’-phenyl-p-phenylenediamine). These findings are in good agreement with our previous study on polar nitrile butadiene rubber.

The current study suggests the green biomass-derived Cu-LSF complex to be a promising low-cost and environmentally safe alternative filler and antioxidant to the hazardous commercial ones.

This study aims to investigate the ecological awareness of Chinese consumers towards fast fashion and examine the effect of social sustainability claims on green brand image and purchase intentions in China, considering China’s unique environmental policy landscape and its significant role in the global fast fashion industry. The study explores the role of altruistic values in promoting sustainability within the well-known fast fashion brand “H” and how they shape brand image, consumer satisfaction and brand equity.

The study collected data from 257 Chinese participants and used a serial mediation model through the PROCESS macro in SPSS to analyse the correlation between green brand image, created through sustainability claims and consumer purchase intentions. The model also assessed the intermediary effects of brand image, satisfaction and equity.

The findings of the research indicate a direct and positive relationship between green brand image and consumer purchase intentions, emphasising the need for clothing and textile industry marketers to strategically promote altruistic values in their sustainability efforts and highlighting the importance of ecological awareness in shaping consumer behaviour in the Chinese context. This approach enhances green satisfaction and green brand equity and ultimately leads to higher green purchase intentions.

This study provides significant insights into the effectiveness of incorporating social sustainability claims in advertising to improve a brand’s green image and influence consumer behaviour. It emphasises the importance of altruistic values in sustainability strategies, offering valuable guidelines for marketers in enhancing green satisfaction and brand equity, thereby boosting consumer purchase intentions in the context of green branding and sustainability advertising. Focussing specifically on the Chinese market, this research sheds light on the impact of ecological awareness among Chinese consumers within the fast-fashion industry. Given China’s substantial role in shaping global fast-fashion production and its evolving environmental policies, this focus adds significant depth to our understanding of sustainability claims’ influence within this crucial consumer base.

In the developing field of nano-materials synthesis, copper oxide nanoparticles (NPs) are deemed to be one of the most significant transition metal oxides because of their intriguing characteristics. Its synthesis employing green chemistry principles has become a key source for next-generation antibiotics attributed to its features such as environmental friendliness, ease of use and affordability. Because they are more environmentally benign, plants have been employed to create metallic NPs. These plant extracts serve as capping, stabilising or hydrolytic agents and enable a regulated synthesis as well.

Organic chemical solvents are harmful and entail intense conditions during nanoparticle synthesis. The copper oxide NPs (CuO-NPs) synthesised by employing the green chemistry principle showed potential antitumor properties. Green synthesised CuO-NPs are regarded to be a strong contender for applications in the pharmacological, biomedical and environmental fields.

The aim of this study is to evaluate the anticancer potential of CuO-NPs plant extracts to isolate and characterise the active anticancer principles as well as to yield more effective, affordable, and safer cancer therapies.

This review article highlights the copper oxide nanoparticle's biomedical applications such as anticancer, antimicrobial, dental and drug delivery properties, future research perspectives and direction are also discussed.

This study aims to investigate the efforts and role of technology leaders in achieving organizational commitment to sustainability through mediating the role of green HRM practices and moderating the role of green knowledge sharing.

This empirical research study is based on two theories: upper echelon theory and social capital theory, in which data were collected from 284 permanent faculty employees belonging to the government, semi-government and private HEIs recognized universities of Pakistan.

The results confirm that the technology leadership style has a significant impact on organizational commitment to sustainability. Whereas green HRM practices as a mediator and green knowledge-sharing behavior as a moderator have also significant impacts on the organizational commitment to sustainability.

This study integrates the concept of technology leadership as a strategy and green HRM practices as a process that jointly impacts organizational commitment to sustainability.

The research aims to investigate the impact of thermo-mechanical aging on SBR under cyclic-loading. By conducting experimental analyses and developing a 3D finite element analysis (FEA) model, it seeks to understand chemical and physical changes during aging processes. This research provides insights into nonlinear mechanical behavior, stress softening and microstructural alterations in SBR compounds, improving material performance and guiding future strategies.

This study combines experimental analyses, including cyclic tensile loading, attenuated total reflection (ATR), spectroscopy and energy-dispersive X-ray spectroscopy (EDS) line scans, to investigate the effects of thermo-mechanical aging (TMA) on carbon-black (CB) reinforced styrene-butadiene rubber (SBR). It employs a 3D FEA model using the Abaqus/Implicit code to comprehend the nonlinear behavior and stress softening response, offering a holistic understanding of aging processes and mechanical behavior under cyclic-loading.

This study reveals significant insights into SBR behavior during thermo-mechanical aging. Findings include surface roughness variations, chemical alterations and microstructural changes. Notably, a partial recovery of stiffness was observed as a function of CB volume fraction. The developed 3D FEA model accurately depicts nonlinear behavior, stress softening and strain fields around CB particles in unstressed states, predicting hysteresis and energy dissipation in aged SBRs.

This research offers novel insights by comprehensively investigating the impact of thermo-mechanical aging on CB-reinforced-SBR. The fusion of experimental techniques with FEA simulations reveals time-dependent mechanical behavior and microstructural changes in SBR materials. The model serves as a valuable tool for predicting material responses under various conditions, advancing the design and engineering of SBR-based products across industries.