Search results

Presents a review on implementing finite element methods on supercomputers, workstations and PCs and gives main trends in hardware and software developments. An appendix included at the end of the paper presents a bibliography on the subjects retrospectively to 1985 and approximately 1,100 references are listed.

In this article, the authors consider the following nonlinear singular boundary value problem (SBVP) known as Lane–Emden equations, −u″(t)-(α/t) u′(t) = g(t, u), 0 < t < 1 where α ≥ 1 subject to two-point and three-point boundary conditions. The authors propose to develop a novel method to solve the class of Lane–Emden equations.

The authors improve the modified variation iteration method (VIM) proposed in [JAAC, 9(4) 1242–1260 (2019)], which greatly accelerates the convergence and reduces the computational task.

The findings revealed that either exact or highly accurate approximate solutions of Lane–Emden equations can be computed with the proposed method.

Novel modification is made in the VIM that provides either exact or highly accurate approximate solutions of Lane-Emden equations, which does not exist in the literature.

The purpose of this paper is to demonstrate the development of key supply chain capabilities in the Indian public sector-run liquefied petroleum gas (LPG) supply chain. This case study has relevance to emerging markets grappling with problems caused by monopolies and subsidies. Furthermore, this case study not only aims to improve operations of the LPG supply chain, but also re-designs its supply network to meet customers’ expectations. It illustrates value creation through growth in non-domestic sales, a reduction in consumption of subsidized LPG as a consequence of better understanding of customer needs and customer diversity, process re-engineering and deployment of ICT systems, and change management and capability building across various LPG stakeholders.

An interpretive research methodology is applied, using an illustrative single case study of the Indian public sector-run LPG supply chain. The research methodology is iterative and exploratory in nature, consisting of a back and forth process between extant literature and the field, as well as in-depth discussions/interviews with senior management, distributors, and consumers.

Key supply chain capabilities of an integrated and seamless ICT system, detection and blocking of duplicate/ghost connections, the capping of entitlements, and coordination and collaboration across various stakeholders result in value creation for all stakeholders. When such collaboration across stakeholders’ spans both vertically and horizontally through the supply chain, change management and capability building drive value creation through policy interventions and initiatives.

This study provides an illustrative example of meeting customers’ expectations, increasing consumer convenience, and improving service levels, amidst the complex subsidy challenges in LPG distribution in India. The economic and environmental benefits, as well as increased customer satisfaction, from policy interventions regarding value creation in supply chains, have implications for similar public sector-run schemes.

As a result of the various policy changes, the LPG subsidy was restricted to legitimate customers, reducing the fiscal burden on the Indian Government. Furthermore, seamless ICT-introduced efficiencies for government, distributers, and customers were attained.

This research articulates the capture, creation, and appropriation of value through the deployment of new supply chain initiatives in a large, complex environment, in particular the public sector-run LPG supply chain.

In this paper, we study a Cauchy-type problem for Hilfer fractional integrodifferential equations with boundary conditions. The existence of solutions for the given problem is proved by applying measure of noncompactness technique in an abstract weighted space. Moreover, we use generalized Gronwall inequality with singularity to establish continuous dependence and uniqueness of ϵ-approximate solutions.

Whilst capabilities in exploiting existing assets and simultaneously exploring new opportunities have proven essential in today's organisations, an understanding of how these so-called ambidextrous capabilities are deployed remains elusive. Thus, the authors aim to investigate the role of better management practices (BMP), as organisational routines, in deploying ambidextrous capabilities in practice.

High-variety, low-volume (HVLV) manufacturers are adopted as exemplar ambidextrous organisations. A conceptual model was developed where BMP, including human resource management (HRM) and production planning and control (PPC), are considered as mediators in the relationship between ambidextrous capabilities and organisational performance outcomes. Partial least squares structural equation modelling was adopted to analyse the results of a survey undertaken by Australian HVLV manufacturers.

The results suggest that merely holding ambidextrous capabilities is not enough – demonstrating a fully mediating role of BMP between ambidextrous capabilities and HVLV manufacturer performance outcomes. However, the individual effects of PPC and HRM prove varied in their unique impact on HVLV manufacturer performance.

This study also provides a rare account of how HVLV manufacturers can leverage their inherently ambidextrous design towards greater organisational performance and highlights critical considerations in the selection of organisational capabilities.

By exemplifying the explanatory power of BMP in ambidextrous capability deployment, this study moves beyond the more prevalent stance on the links between BMP and ambidextrous capabilities as that of capability building through management practices, to one concerning the deployment of the capability itself.

The purpose of this study is to synthesize the literature on the topic of strategic renewal by identifying the key dimensions of extant research and the connections between fragmented research domains.

This study applies systematic literature review to identify the level of consistency and generalizability of research findings across existing studies in a comprehensive manner.

This study identifies six main themes of strategic renewal in the extant literature: (1) antecedents, (2) initiation, (3) logic, (4) structure, (5) process and (6) outcomes of strategic renewal.

By integrating the current streams of research, the review offers a conceptual model of strategic renewal that maps the current state of the research and provide insights into key themes for the future research.

This study, identifies connections between fragmented research domain and offers a conceptual framework of strategic renewal.

The purpose of this paper is to develop a new method based on operational matrices of two-dimensional delta functions for solving two-dimensional nonlinear quadratic integral equations (2D-QIEs) of fractional order, numerically.

For this aim, two-dimensional delta functions are introduced, and their properties are expressed. Then, the fractional operational matrix of integration based on two-dimensional delta functions is calculated for the first time.

By applying the operational matrices, the main problem would be transformed into a nonlinear system of algebraic equations which can be solved by using Newton's iterative method. Also, a few results related to error estimate and convergence analysis of the proposed method are investigated.

Two numerical examples are presented to show the validity and applicability of the suggested approach. All of the numerical calculation is performed on a personal computer by running some codes written in MATLAB software.

The purpose of this paper is to investigate the determinants of best management practices in an Australian state-run healthcare system, namely New South Wales (NSW), and studies the impact of a range of hospital factors in driving best management practices as a means of enhancing healthcare delivery.

This study adapts a unique survey instrument globally tested to quantify the multi-dimensional nature of hospital management practices in 42 acute care public hospitals of NSW. The authors then analysed the role of hospital-specific characteristics in driving best management practices, namely hospital size (measured by the number of hospital beds, employees and doctors), level of skill and education, degree of hospital manager autonomy and organisational hierarchy.

The findings of this study show the areas of strength and potential areas of improvement in NSW hospitals. The authors find a positive association between the adoption of better management practices and hospital size (measured by the number of hospital beds and employees), level of skills and education, degree of hospital manager autonomy and organisational hierarchy. However, hospital size as measured by the number of doctors did not have a statistically significant relationship.

This paper is of interest to both hospital administrators, clinical doctors and healthcare policy-makers who want to improve and develop strategies for better management in the healthcare sector.

This study provides an internationally comparable robust measure of management capability in public hospitals, and contributes to the evidence-base of management practices and performance in hospitals.

This paper proposes to study the effect of line resistance and driver width on crosstalk noise for a CMOS gate driven inductively and capacitively coupled VLSI interconnects.

The paper considers a distributed RLC interconnect topology. The interconnect length is 4 mm and far‐end capacitive loading is 30 fF. The SPICE simulation set‐up uses an IBM 0.13 μm, 1.2 V technology model. The input falling ramp has a transition time of 50 ps. The victim line is grounded through a driver resistance of 50 Ω at near end of interconnect. While observing the effect of line resistance, the aggressor driver has PMOS and NMOS widths of 70 and 30 μm, respectively, and the line resistance is varied from 0 to 500 Ω. For capturing the effect of driver width, SPICE waveforms are generated at far end of victim line for three different line resistances (R=0, 30, and 60 Ω respectively). In each case, the aggressor PMOS driver width is swept from 20 to 100 μm. The corresponding NMOS width is half of PMOS width.

It is observed that, as line resistance increases, the noise peak reduces. This is due to the fact that with increasing resistance the incident and reflected waves traveling along the line experience increasing attenuation. Hence, the waves arriving at the far‐end of the line are of smaller magnitude and larger time durations. This causes noise pulses in the lossy lines to be smaller and wider compared with those in a lossless line. The effect of driver width on noise waveforms is further observed. It is observed that, as the PMOS (and corresponding NMOS) driver width is increased, the victim line gets more prone to crosstalk noise. The crosstalk magnitude level increases alarmingly as driver width is increased, because the driver resistance decreases, which in turn increases the current driving capability of driver.

While designing coupled interconnects, driver width and line resistance play an important role in deciding the crosstalk level. An interconnect designer often increases driver width and reduces line resistance for achieving lower propagation delays. This effort may result in higher crosstalk noise in coupled interconnect. Therefore, a designer should be concerned simultaneously for crosstalk noise while reducing delays.

The complications caused by metallic orthopaedic bone screws like stress-shielding effect, screw loosening, screw migration, higher density difference, painful reoperation and revision surgery for screw extraction can be overcome with the bioabsorbable bone screws. This study aims to use additive manufacturing (AM) technology to fabricate orthopaedic biodegradable cortical screws to reduce the bone-screw-related-complications.

The fused filament fabrication technology (FFFT)-based AM technique is used to fabricate orthopaedic cortical screws. The influence of various process parameters like infill pattern, infill percentage, layer height, wall thickness and different biological solutions were observed on the compressive strength and degradation behaviour of cortical screws.

The porous lattice structures in cortical screws using the rapid prototyping technique were found to be better as porous screws can enhance bone growth and accelerate the osseointegration process with sufficient mechanical strength. The compressive strength and degradation rate of the screw is highly dependent on process parameters used during the fabrication of the screw. The compressive strength of screw is inversely proportional to the degradation rate of the cortical screw.

The present study is focused on cortical screws. Further different orthopaedic screws can be modified with the use of different rapid prototyping techniques.

The use of rapid prototyping techniques for patient-specific bone screw designs is scantly reported. This study uses FFFT-based AM technique to fabricate various infill patterns and porosity of cortical screws to enhance the design of orthopaedic cortical screws.