Search results

The purpose of this paper is to present a deep-learning-based beamforming method for phased array weather radars, especially whose antenna arrays are equipped with large number of elements, for fast and accurate detection of weather observations.

The beamforming weights are computed by a convolutional neural network (CNN), which is trained with input–output pairs obtained from the Wiener solution.

To validate the robustness of the CNN-based beamformer, it is compared with the traditional beamforming methods, namely, Fourier (FR) beamforming and Capon beamforming. Moreover, the CNN is compared with a radial basis function neural network (RBFNN) which is a shallow type of neural network. It is shown that the CNN method has an excellent performance in radar signal simulations compared to the other methods. In addition to simulations, the robustness of the CNN beamformer is further validated by using real weather data collected by the phased array radar at Osaka University (PAR@OU) and compared to, besides the FR and RBFNN methods, the minimum mean square error beamforming method. It is shown that the CNN has the ability to rapidly and accurately detect the reflectivity of the PAR@OU with even less clutter level in comparison to the other methods.

Motivated by the inherit advantages of the CNN, this paper proposes the development of a CNN-based approach to the beamforming of PAR using both simulated and real data. In this paper, the CNN is trained on the optimum weights of Wiener solution. In simulations, it is applied on a large 32 × 32 planar phased array antenna. Moreover, it is operated on real data collected by the PAR@OU.

This paper aims to present the design, fabrication and analysis of a wideband, enhanced gain 1 × 2 patch antenna array with a simple profile structure to meet the desired antenna traits, such as wide bandwidth, high gain and directional patterns expected for the upcoming fifth-generation (5G) wireless applications in the millimeter wave band. To enhance these parameters (bandwidth and gain), a new antenna geometry by using a T-junction power divider is presented.

The theory behind this paper is connected with advancements in the 5G communications related to antennas. The methodology used in this work is to design a high gain array antenna and to identify the best possible power divider to deliver the power in an optimized way. The design methodology adopts several steps like the selection of proper substrate material as per the design specification, size of the antenna as per the frequency of operation and application-specific environment condition. The simulation has been performed on the designed antenna in the electromagnetic simulation tool (high-frequency structure simulator [HFSS]), and optimization has been done with parametric analysis, and then the final array antenna model is proposed. The proposed array contains 2-patch elements excited by one port adapted to 50 Ω through a T-junction power divider. The 1 × 2 array configuration with the suggested geometry helps to improve the overall gain of the antenna, and the implementation of the T-junction power divider provides enhanced bandwidth. The proposed array designed using a 1.6 mm thick flame retardant substrate occupies a compact area of 14 × 12.14 mm².

The prototype of the array antenna is fabricated and measured to validate the design concept. A good agreement has been reached between the measured and simulated antenna parameters. The measured results confirm its wideband and high gain characteristics, covering 24.77–28.80 GHz for S₁₁= –10 dB with a peak gain of about 15.16 dB at 27.65 GHz.

The proposed antenna covers the bandwidth requirements of the 26 GHz n258 band (24.25–27.50 GHz) to be deployed in the UK and Europe. The suggested antenna structure also covers the federal communications commission (FCC)-regulated 28 GHz n261 band (27.5–28.35 GHz) to be deployed in America and Canada. The low profile, compact size, simple structure, wide bandwidth, high gain and desired directional radiation patterns confirm the applicability of the suggested array antenna for the upcoming 5 G wireless systems.

The purpose of this research is to efficiently separate incident terahertz (THz) waves into distinct transmission and reflection channels by minimizing the absorption ratio. So, the optical systems operating within the THz frequency range can developed. To achieve a multi-band response, four different periodic arrays of graphene patterns are used. These arrays are strategically stacked on both sides of three SU-8 photoresists, serving as dielectric materials. Consequently, each layer exhibits a unique influence on the device's response, and by applying four external bias voltages, the behavior of the device can be precisely controlled and adjusted.

A novel optoelectronic device operating in the THz frequency range is introduced, using periodic arrays of graphene patterns and SU-8 photoresist dielectrics. The design of this device is based on meta-surface principles, using both the equivalent circuit model (ECM) and transmission line concept. The output of the device is a THz coupler implemented by analyzing the reflection and transmission channels. The structure is characterized using the ECM and validated through comprehensive full-wave simulations. By representing the electromagnetic phenomenon with passive circuit elements, enabling the calculation of absorption, reflection and transmission through the application of the theory of maximum power transfer.

Based on simulation results and theoretical analysis, the proposed device exhibits sensitivity to gate biasing, enabling efficient reflection and transmission of THz waves. The device achieves reflection and transmission peaks exceeding across the five distinct THz bands 90%, and its behavior can be tuned by external gate biasing. Moreover, the device's sensitivity to variations in geometrical parameters and chemical potentials demonstrates its reliable performance. With its outstanding performance, this high-performance meta-surface emerges as an ideal candidate for fundamental building blocks in larger optical systems, including sensors and detectors, operating within the THz frequency band.

The proposed device covers a significant portion of the THz gap through the provision of five adjustable peaks for reflection and transmission channels. Additionally, the ECM and impedance matching concept offers a simplified and time-efficient approach to designing the meta-surface. Leveraging this approach, the proposed device is effectively represented using passive circuit elements such as inductors, capacitors and resistors, while its performance is validated through the utilization of the finite element method (FEM) as a full-wave simulation tool. This combination of circuit modeling and FEM simulation contributes to the robustness and accuracy of the device's performance evaluation.

The aim of this research study is to mitigate shading impact on solar photovoltaic array. Photovoltaic (PV) array when getting shaded not only results in appreciable power loss but also exhibits multiple power peaks. Due to these multiple power peaks, the maximum power point tracking (MPPT) controllers’ performance will be affected, as most of the times it ends up in tracking the local maximum power peak and not the global power peak.

The PV panels in an PV array when getting shaded even partially would result in huge power loss. The pattern of shading also plays a crucial role, as it renders a cascaded impact on the overall power output because the cells/panels are connected in series and are parallel. Therefore, during shading, intelligent schemes are needed to appropriately connect and discard the unhealthy and healthy panels in right place with right combination. This research proposes one such scheme to mitigate the shading impact.

To mitigate the shading impact and also to have a smooth power-voltage (P-V) curve, a new series inducing switching scheme is introduced. The proposed scheme not only mitigates the shading impact and enhances the output power but also smoothens the P-V curve that facilitates the MPPTs to track the P-V appropriately.

The research findings are inventive in nature and not copied work. The reference works and the inspirations have been duly cited and credited.

The purpose of this paper is to present investigations on the significant influence of the tube material and fin density on fluid elastic instability and vortex shedding in a parallel triangular finned tube array subjected to water cross flow.

The experiment was conducted on finned tube arrays with a fin height of 6 mm and fin density of 3 fins per inch (fpi) and 9 fpi. A dedicated setup has been developed to examine fluid elastic instability and vortex shedding. Nine parallel triangular tube arrays with a pitch to tube diameter ratio of 1.78 were considered. The plain tube arrays, coarse finned tube arrays and fine finned tube arrays each of steel, copper and aluminium materials were tested. Plain tube arrays were tested to compare the results of the finned tube arrays having an effective tube diameter same as that of the plain tube.

A significant effect of fin density and tube material with a variable mass damping parameter was observed on the instability threshold. In the parallel triangular finned tube array subjected to water cross flow, a delay in the instability threshold was observed with an increase in fin density. For steel and aluminium tube arrays, the natural frequency is 9.77 Hz and 10.38 Hz, which is close to each other, whereas natural frequency of the copper tubes is 7.40 Hz. The Connors’ stability constant K for steel and aluminium tube arrays is 4.78 and 4.87, respectively, whereas it is 5.76 for copper tube arrays, which increases considerably compared to aluminum and steel tube arrays. The existence of vortex shedding is confirmed by comparing experimental results with Owen’s hypothesis and the Strouhal number and Reynolds number relationship.

This paper’s results contribute to understand the effect of tube materials and fin density on fluid elastic instability threshold of finned tube arrays subjected to water cross flow.

The assembly simulation in tolerance analysis is one of the most important steps for the tolerance design of mechanical products. However, most assembly simulation methods are based on the rigid body assumption, and those assembly simulation methods considering deformation have a poor efficiency. This paper aims to propose a novel efficient and precise tolerance analysis method based on stable contact to improve the efficiency and reliability of assembly deformation simulation.

The proposed method comprehensively considers the initial rigid assembly state, the assembly deformation and the stability examination of assembly simulation to improve the reliability of tolerance analysis results. The assembly deformation of mating surfaces was first calculated based on the boundary element method with optimal initial assembly state, then the stability of assembly simulation results was assessed by the density-based spatial clustering of applications with noise algorithm to improve the reliability of tolerance analysis. Finally, combining the small displacement torsor theory, the tolerance scheme was statistically analyzed based on sufficient samples.

A case study of a guide rail model demonstrated the efficiency and effectiveness of the proposed method.

The present study only considered the form error when generating the skin model shape, and the waviness and the roughness of the matching surface were not considered.

To the best of the authors’ knowledge, the proposed method is original in the assembly simulation considering stable contact, which can effectively ensure the reliability of the assembly simulation while taking into account the computational efficiency.

The asymmetry of the velocity profile caused by geometric deformation, complex turbulent motion and other factors must be considered to effectively use the flowmeter on any section. This study aims to better capture the flow field information and establish a model to predict the profile velocity, we take the classical double elbow as the research object and propose to divide the flow field into three categories with certain common characteristics.

The deep learning method is used to establish the model of multipath linear velocity fitting profile average velocity. A total of 480 groups of data are taken for training and validation, with ten integer velocity flow fields from 1 m/s to 10 m/s. Finally, accuracy research with relative error as standard is carried out.

The numerical experiment yielded the following promising results: the maximum relative error is approximately 1%, and in the majority of cases, the relative error is significantly lower than 1%. These results demonstrate that it surpasses the classical optimization algorithm Equal Tab (5%) and the traditional artificial neural network (3%) in the same scenario. In contrast with the previous research on a fixed profile, we focus on all the velocity profiles of a certain length for the first time, which can expand the application scope of a multipath ultrasonic flowmeter and promote the research on flow measurement in any section.

This work proposes to divide the flow field of double elbow into three categories with certain common characteristics to better capture the flow field information and establish a model to predict the profile velocity.

The purpose of this paper is to present the author’s method of conservative load spectrum (LS) derivation and close-proximity LS extrapolation applying a correction for measurement uncertainty caused by too low sampling frequency or signal noise, which may affect the load histories collected during the flying session and cause some recorded load increments to be lower than the actual values.

Having in mind that the recorded load signal is burdened with some measurement error, a conservative approach was applied during qualification of the recorded values into 32 discrete load-level intervals and derivation of 32 × 32 half-cycle arrays. A part of each cell value of the half-cycle array was dispersed into the neighboring cells placed above by using a random number generator. It resulted in an increase in the number of load increments, which were one or two intervals higher than those resulting from direct data processing. Such an array was termed a conservative clone of the actual LS. The close-proximity approximation consisted of multiplication of the LSs clones and their aggregation. This way, the LS for extended time of operation was obtained. The whole process was conducted in the MS Excel environment.

Fatigue life calculated for a chosen element of aircraft structure using conservative LS is about 20%–60% lower than for the actual LS (depending on the applied value of dispersion coefficients used in the procedure of LSs clones generation). It means that such a result gives a bigger safety margin when operational life of the aircraft is estimated or when the fatigue test for an extended operational period is programed based on a limited quantity of data from a flying session.

This paper presents a proposal for a novel, conservative approach to fatigue life estimation based on the short-term LS derived from the load signal recorded during the flying session.

This paper aims to introduce the quasi impedance source inverter (qZSI)-based static compensator (STATCOM), which is incorporated into the hybrid distributed power generation system for enhancement of power quality. The distributed power generation system includes the photovoltaic (PV), wind energy conversion system (WECS) and battery energy storage system.

The WECS is used by the self-excited induction generator (SEIG) and the flywheel energy storage system (FESS). To regulate its terminal voltage and frequency, the SEIG requires adjustable volt-ampere reactive (VAR). A combination of a STATCOM and a fixed condenser bank usually serves to satisfy the VAR demand. The maximum correntropy criterion-based adaptive filter technique (AFT) is proposed to control the qZSI-STATCOM and to guarantee that the voltage at the SEIG terminal is harmonic-free while providing non-linear three-phase and single-phase loads.

The coordinated operation of the suggested voltage control and flywheel control systems ensures that load voltage and frequency are retained in their respective values at very low harmonic distortions regardless of wind speed and load variation. The simulation and experimental studies are carried out under different load conditions to validate the efficiencies of the PV-assisted STATCOM.

To improve system stability and minimize total costs, extra load current sensors can also be avoided. This paper proposes to control the SEIG terminal voltage and harmonic elimination in the standalone WECS systems using maximum correntropy criterion-based AFT with a fuzzy logic controller.

With 43.2 million coronavirus cases and 525,000 deaths in 2022, India ranked second worldwide, after the United States (84.6 million cases and 1 million deaths), according to the latest available June 2022 COVID-19 impact data.

Amid people’s growing mistrust in the government, India’s news media enhanced the nation’s distinguished designation as the world’s largest and most populous democracy. India’s news media inform, educate, empower, and entertain a surging population of 1.4 billion people, which is roughly one-sixth of the world’s people.

Drawing upon the media agendamelding theoretical framework, we conducted a case study research into interplay between two prominent democratic institutions, the media and the government, to analyze the role of the COVID-19 pandemic in redefining India’s networked society.

India’s COVID-19 pandemic aggravated internecine tensions between media and government relating to four key freedom issues: (1) world’s largest COVID-19 lockdown affecting 1.3 billion Indians from March 25, 2020 to August 2020 with extensions and five-phased re-openings, to restrict the spread of COVID-19; (2) Internet shutdowns; (3) media censorship during the 1975–1977 “Emergency”; and (4) unabated murders of journalists in India.

Although the COVID-19 pandemic caused deleterious problems debilitating the tensions between the media and the government, India’s journalists thrived by speaking truth to power. This study delineates key aspects of India’s media agendamelding that explicates how the people of India form their media agendas. India’s news audiences meld media messages from newspapers, television, and social media to form a picture of the issues, insights, and ideas that define their lives and times in the 21st century digital age.