Search results

The COVID-19 pandemic has impacted the construction industry, yet still, it is unclear from existing studies about the critical challenges imposed on quality assurance (QA), particularly Cross-border Construction Logistics and Supply Chain (Cb-CLSC). Thus, this study aims to identify and examine the critical challenges of QA of Cb-CLSC during the COVID-19 pandemic.

The aim is achieved via an embedded mixed-method approach pragmatically involving a desk literature review and engaging 150 experts across the globe using expert surveys, and results confirmed by semi-structured interviews. The approach is based on Interpretive Structural Modelling (ISM) as its foundation.

The study revealed ten critical challenges of QA, with the top four including “the shortage of raw construction material (C7)”, “design changes (C6)”, “collaboration and communication difficulties (C1)” and “changes in work practices (C10)”. However, examining the interrelationships among the critical challenges using ISM confirmed C7 and C10 as the most critical challenges. The study again revealed that the critical challenges are sensitive and capable of affecting themselves due to the nature of their interrelationship based on MICMAC analysis. Hence, being consistent with why all the challenges were considered critical amid the pandemic. Sentiment analysis revealed that the critical challenges have not been entirely negative but also positive by creating three areas of opportunities for improvement: technology adoption, worker management, and work process management. However, four areas of challenges in the QA include cost, raw material, time, and work process, including inspection, testing, auditing, communication, etc.

The finding provides a convenient point of reference to researchers, policymakers, practitioners, and decision-makers on formulating policies to enhance the effectiveness of construction QA during the pandemic through to the post-pandemic era.

The study enriches the extant literature on QA, Cb-CLSC, and the COVID-19 pandemic in the construction industry by identifying the critical challenges and examining the interrelationships among them. This provides a better understanding of how the construction QA has been affected by the pandemic and the opportunities created.

The lightweight design of aircraft seats can significantly improve fuel efficiency and reduce greenhouse gas emissions. Metal additive manufacturing (MAM) can produce lightweight topology-optimized designs with improved performance, but limited build volume restricts the printing of large components. The purpose of this paper is to design a lightweight aircraft seat leg structure using topology optimization (TO) and MAM with build volume restrictions, while satisfying structural airworthiness certification requirements.

TO was used to determine a lightweight conceptual design for the seat leg structure. The conceptual design was decomposed to meet the machine build volume, a detailed CAD assembly was designed and print orientation was selected for each component. Static and dynamic verification was performed, the design was updated to meet the structural requirements and a prototype was manufactured.

The final topology-optimized seat leg structure was decomposed into three parts, yielding a 57% reduction in the number of parts compared to a reference design. In addition, the design achieved an 8.5% mass reduction while satisfying structural requirements for airworthiness certification.

To the best of the authors’ knowledge, this study is the first paper to design an aircraft seat leg structure manufactured with MAM using a rigorous TO approach. The resultant design reduces mass and part count compared to a reference design and is verified with respect to real-world aircraft certification requirements.

The purpose of this paper is to investigate how successful lean six sigma (LSS) manifests in the Australasian (Australian and New Zealand) context relative to the context in the USA in terms of LSS project definition, structure and practices.

In-depth investigation through case studies – 12 Australian/New Zealand cases and 4 US cases – on the implementation mechanisms of successful LSS initiatives.

A significant difference was found between Australasian and US definitions of an LSS project. However, firms in both regions followed similar project selection, initiating and execution practices. LSS reporting structures were found to be well-established in US organizations, but none of the Australasian organizations were found to be equipped with such a structure, although the effectiveness of LSS implementation success remained unaffected.

Sufficient uniformity of LSS was found across two regions implying its usefulness/generalizability, but the findings are based only on 12 cases.

The paper provides the groundwork to develop a unique LSS model for Australasian organizations to improve processes in an effective and efficient manner.

Organisations are investing in systems such as product lifecycle management (PLM) to support product development, collaboration across complex supply chains and to provide a framework for digital transformation. Graduates of apparel programmes would benefit from a knowledge of PLM to help realise the opportunities that PLM offers. The purpose of this paper is to report on an educational research project that used PLM as a context for practice-based learning and as a mechanism to update the learning experience and stimulate the development of future practice.

This paper reports on the experiences, critical reflections and data from an action research study to establish a learning community through an educational partnership for PLM software within an undergraduate fashion business course. The cohort of the first year of the intervention (n = 28) is the main study population.

The findings indicate that PLM provided a stimulating learning context supportive of a detailed understanding of current industry practice, critical and innovative thinking and the development of a professional identity.

The opportunity for the development of both industry and educational practice is outlined.

A general introduction to PLM provides important information to support and advance Fashion Industry 4.0. Educational partnerships can reduce barriers to the integration of advanced technologies into the higher education curriculum.

Applications of PLM are under researched in textiles and apparel. The paper contributes to the broadening of the knowledge base of PLM and its potential to achieve strategic transformation of the sector.

The research explores the shift to Quality 4.0, examining the move towards a data-focussed transformation within organizational frameworks. This transition is characterized by incorporating Industry 4.0 technological innovations into existing quality management frameworks, signifying a significant evolution in quality control systems. Despite the evident advantages, the practical deployment in the Indian manufacturing sector encounters various obstacles. This research is dedicated to a thorough examination of these impediments. It is structured around a set of pivotal research questions: First, it seeks to identify the key barriers that impede the adoption of Quality 4.0. Second, it aims to elucidate these barriers' interrelations and mutual dependencies. Thirdly, the research prioritizes these barriers in terms of their significance to the adoption process. Finally, it contemplates the ramifications of these priorities for the strategic advancement of manufacturing practices and the development of informed policies. By answering these questions, the research provides a detailed understanding of the challenges faced. It offers actionable insights for practitioners and policymakers implementing Quality 4.0 in the Indian manufacturing sector.

Employing Interpretive Structural Modelling and Matrix Impact of Cross Multiplication Applied to Classification, the authors probe the interdependencies amongst fourteen identified barriers inhibiting Quality 4.0 adoption. These barriers were categorized according to their driving power and dependence, providing a richer understanding of the dynamic obstacles within the Technology–Organization–Environment (TOE) framework.

The study results highlight the lack of Quality 4.0 standards and Big Data Analytics (BDA) tools as fundamental obstacles to integrating Quality 4.0 within the Indian manufacturing sector. Additionally, the study results contravene dominant academic narratives, suggesting that the cumulative impact of organizational barriers is marginal, contrary to theoretical postulations emphasizing their central significance in Quality 4.0 assimilation.

This research provides concrete strategies, such as developing a collaborative platform for sharing best practices in Quality 4.0 standards, which fosters a synergistic relationship between organizations and policymakers, for instance, by creating a joint task force, comprised of industry leaders and regulatory bodies, dedicated to formulating and disseminating comprehensive guidelines for Quality 4.0 adoption. This initiative could lead to establishing industry-wide standards, benefiting from the pooled expertise of diverse stakeholders. Additionally, the study underscores the necessity for robust, standardized Big Data Analytics tools specifically designed to meet the Quality 4.0 criteria, which can be developed through public-private partnerships. These tools would facilitate the seamless integration of Quality 4.0 processes, demonstrating a direct route for overcoming the barriers of inadequate standards.

This research delineates specific obstacles to Quality 4.0 adoption by applying the TOE framework, detailing how these barriers interact with and influence each other, particularly highlighting the previously overlooked environmental factors. The analysis reveals a critical interdependence between “lack of standards for Quality 4.0” and “lack of standardized BDA tools and solutions,” providing nuanced insights into their conjoined effect on stalling progress in this field. Moreover, the study contributes to the theoretical body of knowledge by mapping out these novel impediments, offering a more comprehensive understanding of the challenges faced in adopting Quality 4.0.

Corporate social responsibility (CSR) ISO standards have been noted as an essential marketing strategy by which firms can achieve consumer trust while improving environmental, social, and quality factors. This study discloses the contextual relationship between CSR ISO standards and sustainable impulse buying behavior. This study also looks to uncover the CSR ISO driving and linkage factors that motivate consumers to make sustainable impulsive purchases.

Three distinct research methods were employed in this research. First, a consumer expert opinion-based Interpretive Structural Modeling (ISM) approach was adopted to reveal the contextual relationship between CSR ISO factors and sustainable impulse buying behavior. Secondly, Matrice Impacts Croises Multiplication Appliques Classement (MICMAC) was used to examine these factors' driving and dependent power. In addition, Minitab package software was also used to check the statistical validation of ISM-MICMAC results.

The results indicate that although environmentally responsible CSR ISO 14001, socially responsible CSR ISO 26000, and consumer perception of product quality CSR ISO 9001 standards contain strong driving power, their dependent power was weak. All these CSR ISO factors (14,001, 26,000, and 9001) strongly impact each other and sustainable impulse buying. Therefore, these three CSR ISO factors have been placed at the bottom of the ISM model. The CSR ISO 14020 standard (labeling of the product), knowledge of CSR ISO standards, consumer trust, and advertising about CSR ISO standards have been placed in the middle. The mentioned factors have intense driving and dependent power and are classified as linkage factors for sustainable impulse buying. Impulse buying behavior has weak driving and strong dependent power, yet this factor strongly depends on other CSR ISO factors. Hence, this factor is placed at the top of the ISM model. In addition, the Minitab package software results indicate that ISM-MICMAC results are statistically valid.

To the best of our knowledge, this research is unique and examines the influence of CSR ISO factors on sustainable impulse buying in the context of Pakistani consumers. Secondly, our study has thoroughly investigated several CSR ISO factors and allied these factors in the context of consumer buying behavior. Third, several CSR ISO factors and impulse buying behavior were examined using a mix of ISM-MICAC and Minitab methods. Thus, including these steps in our study has led to the development of a novel technique.

The research paper aims to study dissatisfaction of teleworking employees in Spain during the Covid-19 health pandemic in order to propose three models: sociodemographic profile of the teleworking dissatisfied employee; advantages and disadvantages for the teleworking dissatisfied employee and advantages for the teleworking dissatisfied employee.

This study uses official open data obtained from the Spanish National Statistical Institute (INE, 2022) through Decision Trees statistical multivariable models implementing Classification and Regression Trees and Recursive Partitioning and Regression Trees techniques to determine the variables that can influence the satisfaction or dissatisfaction of the subjects.

This investigation offers three models with two sociodemographic profiles of dissatisfied teleworking employee, who is a high/middle-level manager/employee around 45 years old, and she/he lives with the partner. Regarding the most important advantage of teleworking, employees consider “use/saving of time” and as disadvantage “worse organization and coordination of work”.

This research provides empirical evidence with inductive reasoning on understanding the challenges of teleworking dissatisfied employees in Spain not only in turbulent times but also in “normalcy” to improve overall teleworker well-being and accomplish company’s and organization’s long-term objectives for better productivity and effectivity. The study has high practical value due to the integral approach incorporating dissatisfaction as a driver that can trigger negative behaviours towards the organizations and that is seldom addressed in the literature. Additionally, this paper could provide some new ideas for accomplishing “Spain Digital 2025” and “Europe’s Digital Decade: 2030” plans on institutional level.

The COVID-19 pandemic has posed many challenges in almost all sectors around the globe. Because of the pandemic, government entities responsible for managing health-care resources face challenges in managing and distributing their limited and valuable health resources. In addition, severe outbreaks may occur in a small or large geographical area. Therefore, county-level preparation is crucial for officials and organizations who manage such disease outbreaks. However, most COVID-19-related research projects have focused on either state- or country-level. Only a few studies have considered county-level preparations, such as identifying high-risk counties of a particular state to fight against the COVID-19 pandemic. Therefore, the purpose of this research is to prioritize counties in a state based on their COVID-19-related risks to manage the COVID outbreak effectively.

In this research, the authors use a systematic hybrid approach that uses a clustering technique to group counties that share similar COVID conditions and use a multi-criteria decision-making approach – the analytic hierarchy process – to rank clusters with respect to the severity of the pandemic. The clustering was performed using two methods, k-means and fuzzy c-means, but only one of them was used at a time during the experiment.

The results of this study indicate that the proposed approach can effectively identify and rank the most vulnerable counties in a particular state. Hence, state health resources managing entities can identify counties in desperate need of more attention before they allocate their resources and better prepare those counties before another surge.

To the best of the authors’ knowledge, this study is the first to use both an unsupervised learning approach and the analytic hierarchy process to identify and rank state counties in accordance with the severity of COVID-19.

The concept of productivity is central to performance management and decision-making, although it is complex and multifaceted. This paper aims to describe a methodology based on the use of Big Data in a cluster analysis combined with a data envelopment analysis (DEA) that provides accurate and reliable productivity measures in a large network of retailers.

The methodology is described using a case study of a leading kitchen furniture producer. More specifically, Big Data is used in a two-step analysis prior to the DEA to automatically cluster a large number of retailers into groups that are homogeneous in terms of structural and environmental factors and assess a within-the-group level of productivity of the retailers.

The proposed methodology helps reduce the heterogeneity among the units analysed, which is a major concern in DEA applications. The data-driven factorial and clustering technique allows for maximum within-group homogeneity and between-group heterogeneity by reducing subjective bias and dimensionality, which is embedded with the use of Big Data.

The use of Big Data in clustering applied to productivity analysis can provide managers with data-driven information about the structural and socio-economic characteristics of retailers' catchment areas, which is important in establishing potential productivity performance and optimizing resource allocation. The improved productivity indexes enable the setting of targets that are coherent with retailers' potential, which increases motivation and commitment.

This article proposes an innovative technique to enhance the accuracy of productivity measures through the use of Big Data clustering and DEA. To the best of the authors’ knowledge, no attempts have been made to benefit from the use of Big Data in the literature on retail store productivity.

In demand-driven markets, customer value, sometimes called perceived use value or consumer surplus, is defined by the customer rather than the firm. The value a firm can appropriate, its profits, is driven by the customer’s willingness to pay for the value they receive, adjusted by costs. This paper introduces a conceptual framework that helps understand value creation and appropriation in demand-driven markets and shows how to influence them through strategic decision-making.

This paper uses an axiomatic approach combined with an extended analytical formulation of the jobs-to-be-done framework to contextualise demand-driven markets. It mathematically derives implications for managerial decision-making concerning selecting customer segments, optimising customer value creation and maximising firm value appropriation in a competitive environment.

Rooting strategic decision-making in the jobs-to-be-done framework allows distinguishing between what customers want to achieve (goal), what product attributes need to be satisfied (opportunity space/constraints) and what value creation criteria related to features are important (utility function). This paper shows that starting from a job-to-be-done, the problem of identifying which customer segments to serve, what product to offer and what price to charge, can be formulated as an optimisation problem that simultaneously (rather than sequentially) solves for the three decision variables, customer segments, product features and price, by maximising the value that a firm can appropriate, subject to maximising customer value creation and constrained by the competitive environment.

Applying the derived results to simultaneously deciding which customer segments to target, what product features to offer and what price to charge, given a set of competing products, allows managers to increase their chances of winning the competitive game.

This paper shows that starting from a job-to-be-done and simultaneously focusing on customers, product features, price and competitors enhances firm profitability. Strategic decision-making is formulated as an optimisation problem based on an axiomatic approach contextualising demand-driven markets.