Search results
1 – 10 of 36Erik Velasco and Elvagris Segovia
Waiting for a bus may represent a period of intense exposure to traffic particles in hot and noisy conditions in the street. To lessen the particle load and tackle heat in bus…
Abstract
Purpose
Waiting for a bus may represent a period of intense exposure to traffic particles in hot and noisy conditions in the street. To lessen the particle load and tackle heat in bus stops a shelter was equipped with an electrostatic precipitator and a three-step adiabatic cooling system capable of dynamically adjust its operation according to actual conditions. This study evaluates the effectiveness of the Airbitat Oasis Smart Bus Stop, as the shelter was called, to provide clean and cool air.
Design/methodology/approach
The particle exposure experienced in this innovative shelter was contrasted with that in a conventional shelter located right next to it. Mass concentrations of fine particles and black carbon, and particle number concentration (as a proxy of ultrafine particles) were simultaneously measured in both shelters. Air temperature, relative humidity and noise level were also measured.
Findings
The new shelter did not perform as expected. It only slightly reduced the abundance of fine particles (−6.5%), but not of ultrafine particles and black carbon. Similarly, it reduced air temperature (−1 °C), but increased relative humidity (3%). Its operation did not generate additional noise.
Practical implications
The shelter's poor performance was presumably due to design flaws induced by a lack of knowledge on traffic particles and fluid dynamics in urban environments. This is an example where harnessing technology without understanding the problem to solve does not work.
Originality/value
It is uncommon to come across case studies like this one in which the performance and effectiveness of urban infrastructure can be assessed under real-life service settings.
Details
Keywords
Sergejs Pavlovs, Andris Jakovičs and Alexander Chudnovsky
The purpose of this paper is the study of the electro-vortex flow (EVF) as well as heating and melting processes for mini industrial direct current electric arc furnace (DC EAF).
Abstract
Purpose
The purpose of this paper is the study of the electro-vortex flow (EVF) as well as heating and melting processes for mini industrial direct current electric arc furnace (DC EAF).
Design/methodology/approach
A mini DC EAF was designed, manufactured and installed to study the industrial processes of heating and melting a small amount of melt, being 4.6 kg of steel in the case under study. Numerical modelling of metal melting was performed using the enthalpy and porosity approach at equal values and non-equal values of the solidus and liquidus temperatures of the metal. The EVF of the liquid phase of metal was computed using the large eddy simulation model of turbulence. Melt temperature measurements were made using an infrared camera and a probe with a thermocouple sensor. The melt speed was estimated by observing the movement of particles at the top surface of melt.
Findings
The thermal flux for metal heating and melting, which is supplied through an arc spot at the top surface of metal, is estimated using the thermal balance of the furnace at melting point. The melting time was estimated using numerical modelling of heating and melting of metal. The process started at room temperature and finished once whole volume of metal was molten. The evolution of the solid/melt phase boundary as well as evolution of EVF patterns of the melt was studied.
Originality/value
Numerical studies of heating and melting processes in metal were performed in the case of intensive liquid phase turbulent circulation due to the Lorentz force in the melt, which results from the interaction of electrical current with a self-magnetic field.
Details
Keywords
Panagiotis Karaiskos, Yuvaraj Munian, Antonio Martinez-Molina and Miltiadis Alamaniotis
Exposure to indoor air pollutants poses a significant health risk, contributing to various ailments such as respiratory and cardiovascular diseases. These unhealthy consequences…
Abstract
Purpose
Exposure to indoor air pollutants poses a significant health risk, contributing to various ailments such as respiratory and cardiovascular diseases. These unhealthy consequences are specifically alarming for athletes during exercise due to their higher respiratory rate. Therefore, studying, predicting and curtailing exposure to indoor air contaminants during athletic activities is essential for fitness facilities. The objective of this study is to develop a neural network model designed for predicting optimal (in terms of health) occupancy intervals using monitored indoor air quality (IAQ) data.
Design/methodology/approach
This research study presents an innovative approach employing a long short-term memory (LSTM) recurrent neural network (RNN) to determine optimal occupancy intervals for ensuring the safety and well-being of occupants. The dataset was collected over a 3-month monitoring campaign, encompassing 15 meteorological and indoor environmental parameters monitored. All the parameters were monitored in 5-min intervals, resulting in a total of 77,520 data points. The dataset collection parameters included the building’s ventilation methods as well as the level of occupancy. Initial preprocessing involved computing the correlation matrix and identifying highly correlated variables to serve as inputs for the LSTM network model.
Findings
The findings underscore the efficacy of the proposed artificial intelligence model in forecasting indoor conditions, yielding highly specific predicted time slots. Using the training dataset and established threshold values, the model effectively identifies benign periods for occupancy. Validation of the predicted time slots is conducted utilizing features chosen from the correlation matrix and their corresponding standard ranges. Essentially, this process determines the ratio of recommended to non-recommended timing intervals.
Originality/value
Humans do not have the capacity to process this data and make such a relevant decision, though the complexity of the parameters of IAQ imposes significant barriers to human decision-making, artificial intelligence and machine learning systems, which are different. Present research utilizing multilayer perceptron (MLP) and LSTM algorithms for evaluating indoor air pollution levels lacks the capability to predict specific time slots. This study aims to fill this gap in evaluation methodologies. Therefore, the utilized LSTM-RNN model can provide a day-ahead prediction of indoor air pollutants, making its competency far beyond the human being’s and regular sensors' capacities.
Details
Keywords
Agnishwar Girigoswami, Poornima Govindharaj, Mahashweta Mitra Ghosh and Koyeli Girigoswami
Abstract
Purpose
In addition to agriculture, energy production, and industries, potable water plays a significant role in many fields, further increasing the demand for potable water. Purification and desalination play a major role in meeting the need for clean drinking water. Clean water is necessary in different areas, such as agriculture, industry, food industries, energy generation and in everyday chores.
Design/methodology/approach
The authors have used the different search engines like Google Scholar, Web of Science, Scopus and PubMed to find the relevant articles and prepared this mini review.
Findings
The various stages of water purification include coagulation and flocculation, coagulation, sedimentation and disinfection, which have been discussed in this mini review. Using nanotechnology in wastewater purification plants can minimize the cost of wastewater treatment plants by combining several conventional procedures into a single package.
Social implications
In society, we need to avail clean water to meet our everyday, industrial and agricultural needs. Purification of grey water can meet the clean water scarcity and make the environment sustainable.
Originality/value
This mini review will encourage the researchers to find out ways in water remediation to meet the need of pure water in our planet and maintain sustainability.
Details
Keywords
The research focused on analysing a unique type of heat exchanger that uses swirling air flow over heated tubes. This heat exchanger includes a round baffle plate with holes and…
Abstract
Purpose
The research focused on analysing a unique type of heat exchanger that uses swirling air flow over heated tubes. This heat exchanger includes a round baffle plate with holes and opposite-oriented trapezoidal air deflectors attached at different angles. The deflectors are spaced at various distances, and the tubes are arranged in a circular pattern while maintaining a constant heat flux.
Design/methodology/approach
This setup is housed inside a circular duct with airflow in the longitudinal direction. The study examined the impact of different inclination angles and pitch ratios on the performance of the heat exchanger within a specific range of Reynolds numbers.
Findings
The findings revealed that the angle of inclination significantly affected the flow velocity, with higher angles resulting in increased velocity. The heat transfer performance was best at lower inclination angles and pitch ratios. Flow resistance decreased with increasing angle of inclination and pitch ratio.
Originality/value
The average thermal enhancement factor decreased with higher inclination angles, with the maximum value observed as 0.94 at a pitch ratio of 1 at an angle of 30°.
Details
Keywords
Laina Hilma Sari, Brit Anak Kayan and Zahriah Zahriah
During the COVID-19 pandemic in 2020–2021 in Indonesia, the indoor environmental quality (IEQ) of local houses occupied by infected occupants was adversely affected. This paper…
Abstract
Purpose
During the COVID-19 pandemic in 2020–2021 in Indonesia, the indoor environmental quality (IEQ) of local houses occupied by infected occupants was adversely affected. This paper aims to appraise the IEQ of the affected Banda Aceh houses with insights into enabling them to be resilient against the negative impacts of the pandemic.
Design/methodology/approach
Quantitative field measurement in the case study of five concrete houses located in urban areas which are affected by IEQ factors: (1) indoor air quality (IAQ), (2) thermal comfort and (3) visual comfort, compared against the Indonesian National standard (SNI). The case study involved measurement of the first two factors over 24 h, while the third factor was measured during sun hours. Considering the limitations of the measuring tools for logging available data in this research, air quality is measured from 8 am to 10 pm.
Findings
Thermal comfort in the affected houses is generally regarded as warm, optimal and cool comfort, indicated by the effective temperatures of between 20.5 and 27.1°C. Frequently closed windows, limited land area and access had caused a lack of air circulation, with air velocity of dominantly 0 m/s in the houses. The illuminance of natural light received in three houses was insufficient – less than 120 lux as compared with the other two. This study found an uptrend of higher air temperature and relative humidity in the affected houses resulting in poorer IAQ; conversely, the higher the air velocity in the houses, the fewer the indoor air pollutants such as formaldehyde (HCHO), total volatile organic compounds (TVOC) and carbon dioxide (CO2).
Originality/value
This study is a pioneer in evaluating IEQ in houses occupied by COVID-19 patients in Indonesia, especially in dwelling cases in Aceh Province. It also encompasses environmental and societal challenges to sustaining resilient buildings in pandemic hit regions.
Details
Keywords
Nirmal K. Manna, Abhinav Saha, Nirmalendu Biswas and Koushik Ghosh
This paper aims to investigate the thermal performance of equivalent square and circular thermal systems and compare the heat transport and irreversibility of magnetohydrodynamic…
Abstract
Purpose
This paper aims to investigate the thermal performance of equivalent square and circular thermal systems and compare the heat transport and irreversibility of magnetohydrodynamic (MHD) nanofluid flow within these systems.
Design/methodology/approach
The research uses a constraint-based approach to analyze the impact of geometric shapes on heat transfer and irreversibility. Two equivalent systems, a square cavity and a circular cavity, are examined, considering identical heating/cooling lengths and fluid flow volume. The analysis includes parameters such as magnetic field strength, nanoparticle concentration and accompanying irreversibility.
Findings
This study reveals that circular geometry outperforms square geometry in terms of heat flow, fluid flow and heat transfer. The equivalent circular thermal system is more efficient, with heat transfer enhancements of approximately 17.7%. The corresponding irreversibility production rate is also higher, which is up to 17.6%. The total irreversibility production increases with Ra and decreases with a rise in Ha. However, the effect of magnetic field orientation (γ) on total EG is minor.
Research limitations/implications
Further research can explore additional geometric shapes, orientations and boundary conditions to expand the understanding of thermal performance in different configurations. Experimental validation can also complement the numerical analysis presented in this study.
Originality/value
This research introduces a constraint-based approach for evaluating heat transport and irreversibility in MHD nanofluid flow within square and circular thermal systems. The comparison of equivalent geometries and the consideration of constraint-based analysis contribute to the originality and value of this work. The findings provide insights for designing optimal thermal systems and advancing MHD nanofluid flow control mechanisms, offering potential for improved efficiency in various applications.
Graphical Abstract
Details
Keywords
The purpose of this experimental research was to examine a novel axial heat exchanger featuring swirling air movement over heated tubes. This apparatus is designed with perforated…
Abstract
Purpose
The purpose of this experimental research was to examine a novel axial heat exchanger featuring swirling air movement over heated tubes. This apparatus is designed with perforated circular baffle plates complemented by rectangular air deflectors operating at different inclination angles. The tubes were arranged in a consistent layout parallel to the longitudinal airflow. The deflector’s heightened air-side turbulence initiates the frenzied motion, escalating the surface heat transfer rate.
Design/methodology/approach
The tubes maintained a constant heat flux condition over the surface. In each baffle plate, eight deflectors with identical inclination angles were devised in a reverse position, forming a rotation of air inside a circular duct that held tubes (carrying hot water) which elevated air-side turbulence, thereby enhancing the rate of heat transference on the surface. The baffle plates were equally situated from each other at changing pitch ratios. The Reynolds quantity was preserved in the scope of 16,000–30,000. The performance of the heat exchanger considering pitch ratios and inclination angles was examined.
Findings
The research indicates that when examined under similar conditions, an exchanger with a deflector baffle plate shows a strong dependence on the pitch ratio and inclination angle with a mean rise of 0.19 times in thermal enhancement factor at an inclination angle of 30° and a pitch ratio of 1.2 contrasted with an exchanger with segmental baffle plates.
Originality/value
The result shows the dependence of pitch ratio, Reynolds number and inclination on the heat transfer and friction factor rate.
Details
Keywords
Sepehr Ghazinoory and Parvaneh Aghaei
This study aims to investigate the importance and effect of asymmetric technological collaborations’ key success factors in developing countries. The number of collaborations…
Abstract
Purpose
This study aims to investigate the importance and effect of asymmetric technological collaborations’ key success factors in developing countries. The number of collaborations between large enterprises and SMEs, known as asymmetric technological collaborations (ATC) is growing considerably. But this asymmetry in itself can increase the number and intensity of collaboration challenges. So far, limited studies have been conducted on the stability of ATCs, and most of them have been in the context of developed countries. Meanwhile, studying the strength and stability of collaboration in the nano industry with growing market value and increasing newcomers is of particular importance.
Design/methodology/approach
Here, with bionic engineering approach, we used chemistry for the first time to identify the main stability factors of ATCs and build our hypotheses and research model. To this end, we introduced the factors affecting the stability of the dative chemical bond as a bionic counterpart of corporate venture capital (CVC), which is a type of ATC, and proposed 4 hypotheses. We used structural equation modeling (SEM) with partial least squares (PLS) method to examine the hypothesized relationships.
Findings
The analysis of survey questionnaire data from 26 asymmetric collaborations in Iran’s nanotechnology industry shows that “learning of the acceptor company” with a negative effect, “network ties” and “development of the collaboration host region” with a positive effect and “diversity in the collaboration portfolio” with an inverted U-shaped effect are the most influential factors in the stability and continuity of CVCs, respectively.
Originality/value
The findings of this research can be the beginning of a broad path leading to exploring and getting inspiration from chemistry to analyze management issues.
Details
Keywords
Sonali Khatua, Manoranjan Dash and Padma Charan Mishra
Ores and minerals are extracted from the earth’s crust depending on the type of deposit. Iron ore mines come under massive deposit patterns and have their own mine development and…
Abstract
Purpose
Ores and minerals are extracted from the earth’s crust depending on the type of deposit. Iron ore mines come under massive deposit patterns and have their own mine development and life cycles. This study aims to depict the development and life cycle of large open-pit iron ore mines and the intertwined organizational design of the departments/sections operated within the industry.
Design/methodology/approach
Primary data were collected on the site by participant observation, in-depth interviews of the field staff and executives, and field notes. Secondary data were collected from the literature review to compare and cite similar or previous studies on each mining activity. Finally, interactions were conducted with academic experts and top field executives to validate the findings. An organizational ethnography methodology was employed to study and analyse four large-scale iron ore mines of India’s largest iron-producing state, Odisha, from January to April 2023.
Findings
Six stages were observed for development and life cycle, and the operations have been depicted in a schematic diagram for ease of understanding. The intertwined functioning of organizational set-up is also discovered.
Originality/value
The paper will benefit entrepreneurs, mining and geology students, new recruits, and professionals in allied services linked to large iron ore mines. It offers valuable insights for knowledge enhancement, operational manual preparation and further research endeavours.
Details