Search results

The main purpose of this study resides essentially in the development of a new tool to quantify the biomass in the bioreactor operating under steady state conditions.

Modeling is the most relevant tool for understanding the functioning of some complex processes such as biological wastewater treatment. A steady state model equation of activated sludge model 1 (ASM1) was developed, especially for autotrophic biomass (XBA) and for oxygen uptake rate (OUR). Furthermore, a respirometric measurement, under steady state and endogenous conditions, was used as a new tool for quantifying the viable biomass concentration in the bioreactor.

The developed steady state equations simplified the sensitivity analysis and allowed the autotrophic biomass (XBA) quantification. Indeed, the XBA concentration was approximately 212 mg COD/L and 454 mgCOD/L for SRT, equal to 20 and 40 d, respectively. Under the steady state condition, monitoring of endogenous OUR permitted biomass quantification in the bioreactor. Comparing XBA obtained by the steady state equation and respirometric tool indicated a percentage deviation of about 3 to 13%. Modeling bioreactor using GPS-X showed an excellent agreement between simulation and experimental measurements concerning the XBA evolution.

These results confirmed the importance of respirometric measurements as a simple and available tool for quantifying biomass.

Unconventional machining processes, particularly ultrasonic vibration cutting (UVC), can overcome such technical bottlenecks. However, the precise mechanism through which UVC affects the in-service functional performance of advanced aerospace materials remains obscure. This limits their industrial application and requires a deeper understanding.

The surface integrity and in-service functional performance of advanced aerospace materials are important guarantees for safety and stability in the aerospace industry. For advanced aerospace materials, which are difficult-to-machine, conventional machining processes cannot meet the requirements of high in-service functional performance owing to rapid tool wear, low processing efficiency and high cutting forces and temperatures in the cutting area during machining.

To address this literature gap, this study is focused on the quantitative evaluation of the in-service functional performance (fatigue performance, wear resistance and corrosion resistance) of advanced aerospace materials. First, the characteristics and usage background of advanced aerospace materials are elaborated in detail. Second, the improved effect of UVC on in-service functional performance is summarized. We have also explored the unique advantages of UVC during the processing of advanced aerospace materials. Finally, in response to some of the limitations of UVC, future development directions are proposed, including improvements in ultrasound systems, upgrades in ultrasound processing objects and theoretical breakthroughs in in-service functional performance.

This study provides insights into the optimization of machining processes to improve the in-service functional performance of advanced aviation materials, particularly the use of UVC and its unique process advantages.

The purpose of this article is to provide information about interactions between pink-pigmented facultative methylotroph (PPFM) organisms and plants, their molecular mechanisms of methylotrophic metabolism, application of PPFMs in agriculture, biotechnology and bioremediation and also to explore lacuna in PPFMs research and direction for future research.

Research findings on PPFM organisms as potent plant growth promoting organisms are discussed in the light of reports published by various workers. Unexplored field of PPFM research are detected and their application as a new group of biofertilizer that also help host plants to overcome draught stress in poorly irrigated crop field is suggested.

PPFMs are used as plant growth promoters for improved crop yield, seed germination capacity, resistance against pathogens and tolerance against drought stress. Anti-oxidant and UV resistant properties of PPFM pigments protect the host plants from strong sunshine. PPFMs have excellent draught ameliorating capacity.

To meet the ever increasing world population, more and more barren, less irrigated land has to be utilized for agriculture and horticulture purpose and use of PPFM group of organisms due to their draught ameliorating properties in addition to their plant growth promoting characters will be extremely useful. PPFMs are also promising candidates for the production of various industrially and medicinally important enzymes and other value-added products. Wider application of this ecofriendly group of bacteria will reduce crop production cost thus improving economy of the farmers and will be a greener alternative of hazardous chemical fertilizers and fungicides.

Graphicalabstract:

In addition to agriculture, energy production, and industries, potable water plays a significant role in many fields, further increasing the demand for potable water. Purification and desalination play a major role in meeting the need for clean drinking water. Clean water is necessary in different areas, such as agriculture, industry, food industries, energy generation and in everyday chores.

The authors have used the different search engines like Google Scholar, Web of Science, Scopus and PubMed to find the relevant articles and prepared this mini review.

The various stages of water purification include coagulation and flocculation, coagulation, sedimentation and disinfection, which have been discussed in this mini review. Using nanotechnology in wastewater purification plants can minimize the cost of wastewater treatment plants by combining several conventional procedures into a single package.

In society, we need to avail clean water to meet our everyday, industrial and agricultural needs. Purification of grey water can meet the clean water scarcity and make the environment sustainable.

This mini review will encourage the researchers to find out ways in water remediation to meet the need of pure water in our planet and maintain sustainability.

The purpose of this article is to investigate on changes of the microbial load and the chemical and physical properties of date fruits stored for 6 months under two different temperatures.

A composite sample of 100 kg date fruits from the Khalas variety, season 2019, was collected from the local market in Al Ahsa Province, Saudi Arabia, packaged in 1 kg lots, stored at room and refrigerator temperatures and the microbial contamination and the chemical and physical properties monitored over a period of six months of storage. Total bacteria, lactic acid bacteria, Enterobacteriaceae, yeasts and molds were counted and representatives of yeast and mold contaminants were identified using morphological, physiological and molecular typing techniques. Changes in the color and texture of the samples were also monitored during storage.

The yeasts detected were two strains of each of Lachancea thermotolerans and Rhodosporidiobolus fluvialis and one strain of Cystofilobasidium lacus-mascardii. For molds, one strain of each of Aspergillus niger, Aspergillus flavus, Penicillium chrysogenum and Aspergillus caespitosus have been detected. No significant growth of these microorganisms was observed, but enough load persisted during storage that makes the samples not meeting the microbiological standards. There were significant changes in the color and texture of the fruits during storage.

These findings add important information that can help producers and processors to improve quality and promote marketing of date fruits, especially to international markets.

A direct correlation exists between waste disposal, disease spread and public health. This article systematically reviewed healthcare waste and its implication for public health. This review identified and described the associations and impact of waste disposal on public health.

This paper systematically reviewed the literature on waste disposal and its implications for public health by searching Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA), PubMed, Web of Science, Scopus and ScienceDirect databases. Of a total of 1,583 studies, 59 articles were selected and reviewed.

The review revealed the spread of infectious diseases and environmental degradation as the most typical implications of improper waste disposal to public health. The impact of waste includes infectious diseases such as cholera, Hepatitis B, respiratory problems, food and metal poisoning, skin infections, and bacteremia, and environmental degradation such as land, water, and air pollution, flooding, drainage obstruction, climate change, and harm to marine and wildlife.

Infectious diseases such as cholera, hepatitis B, respiratory problems, food and metal poisoning, skin infections, bacteremia and environmental degradation such as land, water, and air pollution, flooding, drainage obstruction, climate change, and harm to marine and wildlife are some of the public impacts of improper waste disposal.

Healthcare industry waste is a significant waste that can harm the environment and public health if not properly collected, stored, treated, managed and disposed of. There is a need for knowledge and skills applicable to proper healthcare waste disposal and management. Policies must be developed to implement appropriate waste management to prevent public health threats.

This article sets out to show how principles and questions about method that underlie a way of interpreting the discipline of conservation and restoration can find results in research and studies, aiming at achieving even conscious reuse process. The occasion is the very recent research performed on the former Church of Saints Gerolamo and Francesco Saverio in Genoa, Italy, the Jesuit church annexed to the 17th-century College of the order. It is a small Baroque jewel in the heart of the ancient city, former University Library and actually abandoned, forgotten for years, inaccessible and awaiting a new use.

The two-year work carried out on the monumental building was conducted according to a study and research methodology developed and refined over the years within the activities of the School of Specialisation in Architectural Heritage and Landscape of the University of Genoa. It is a multidisciplinary and rigorous approach, which aims to train high-level professionals, up-to-date and aware of the multiple problems that interventions on existing buildings, especially of a monumental nature, involve.

The biennal study has been carried out within the activities of the Post-Graduate Programme in Architectural Heritage and Landscape of the University of Genoa. The work methodology faces the challenges of the contemporary complexity, raised by the progressive broadening of the concept of cultural “heritage” and by the problems of its conservation, its active safeguard and its reuse: safety in respect of seismic risk, fire and hydro geological instability, universal accessibility – cognitive, physical and alternative – resource efficiency, comfort and savings in energy consumption, sustainability, communication and involvement of local communities and stakeholders.

The goals of the work were the following: understanding of the architectural heritage, through the correlated study of its geometries, elements and construction materials, surfaces, structures, spaces and functions; understanding of the transformations that the building has undergone over time, relating the results of historical reconstructions from indirect sources and those of direct archaeological analysis; assessment of the state of conservation of the building recognising phenomena of deterioration, damage, faults and deficits that affect materials, construction elements, systems and structures; identification of the causes and extent of damage, faults and deficits, assessing the vulnerability and level of exposure of the asset to the aggression of environmental factors and related risks; evaluation of the compatibility between the characteristics of the available spaces, the primary needs of conservation, the instance of regeneration and possible new uses; the definition of criteria and guidelines for establishing the planning of conservation, restoration and redevelopment interventions.

Blood lipid and lipoprotein abnormalities are common among patients with diabetes. The study aimed to assess dietary fat intake and its association with blood lipids among patients with Type 2 diabetes mellitus (T2DM) considering sex differences.

A cross-sectional observational study was conducted with patients (207 males and 197 females) with T2DM. The daily food intake and its contents of fat and fat types were assessed through face-to-face interview. Anthropometric measurements, glycated hemoglobin (HbA1c), triglyceride, total cholesterol (TC), high-density lipoprotein (HDL) cholesterol and low-density lipoprotein (LDL) cholesterol were initially recorded.

The results revealed that TC, LDL and HDL cholesterol levels were significantly higher in females than in males. However, the TC: HDL ratio was significantly higher in males than in females. The results also showed that the daily intake of saturated fatty acid (SFA) slightly exceeded the daily recommended allowance. However, the monounsaturated fatty acid + polyunsaturated fatty acid/SFA (MUFA + PUFA/SFA) ratio was within the recommended ratio. In addition, this study found that the main sources of SFA and cholesterol intake were milk and milk products. A significant association between high fat intake and HbA1c levels was observed (r = 0.234, p < 0.001).

As it is a cross-sectional observational study, this study has the natural limitation where it can only demonstrate an association.

The types of dietary fat intake may contribute to blood lipid abnormalities and differences effects may exist among male and female. Studies on the effect of daily fat intake and its types on blood lipids in patients with diabetes, in particular Saudi patients with diabetes are limited. This study focused on the amount and type of the consumed fat among male and female Saudi patients with T2DM and studied the relationship between the type of consumed fat and blood lipid profiles.