Search results

The aim of this study is to empirically explore and analyze the concrete tasks of output measurement and the inherent challenges related to these tasks in a traditional and autonomous professional public work setting – the judicial system.

The analysis of the tasks is based on a categorization of general performance measurement motives (control-motivate-learn) and main stakeholder levels (society-organization-professionals). The analysis is exploratory and conducted as an empirical content analysis on materials and reports produced in two performance improvement projects conducted in European justice organizations.

The identified main tasks in the different categories are related to managing resources, controlling performance deviations, and encouraging improvement and development of performance. Based on the results, key improvement areas connected to output measurement in professional public organizations are connected to the improvement of objectivity and fairness in budgeting and work allocation practices, improvement of output measures' versatility and informativeness to highlight motivational and learning purposes, improvement of professional self-management in setting output targets and producing outputs, as well as improvement of organizational learning from the output measurement.

The paper presents empirically founded practical examples of challenges and improvement opportunities related to the tasks of output measurement in professional public organization.

This paper fulfils an identified need to study how general performance management motives realize as concrete tasks of output measurement in justice organizations.

This paper aims to promote the higher quality development of high-tech enterprises in China. While science and technology have greatly promoted human civilization, resources have been excessively consumed and the environment has been sharply polluted. Therefore, it is particularly important for current enterprises to make use of scientific and technological innovation to maximize the benefits of mankind, minimize the loss of nature, and promote the sustainable development of our country.

By using DEA-Banker-Charnes-Cooper (BCC) model and DEA-Malmquist model, this paper comprehensively examines the innovation efficiency of high-tech enterprises from both static and dynamic perspectives, and conducts a provincial comparative study with the panel data of ten representative provinces from 2011 to 2020.

The research findings are as follows: the rapid number increase of high-tech enterprises in most provinces (cities) is accompanied by an ineffective input–output efficiency; the quality of high-tech enterprises needs to comprehensively examine both input–output efficiency and total factor productivity; and there is not a positive correlation between element investment and innovation performance.

Because the DEA model used in this paper assumes that the improvement direction of invalid units is to ensure that the input ratio of various production factors remains unchanged but sometimes the proportion of scientific and technological activities personnel and the total research and development investment is not constant. In the future, the nonradial DEA model can be considered for further research. Due to historical data statistics, more provinces, cities and longer panel data are difficult to obtain. The samples studied in this paper mainly refer to the provinces and cities that ranked first in the number of national high-tech enterprises in 2020. Limited by the number of samples, DEA analysis failed to select more input and output indicators. In the future, with the accumulation of statistical data, the existing efficiency analysis will be further optimized.

Aiming at the misunderstanding of emphasizing quantity and neglecting quality in the cultivation of high-tech enterprises, this paper comprehensively uses DEA-BCC model and DEA Malmquist index decomposition method to make a comprehensive comparative study on the development of high-tech enterprises in ten representative provinces (cities) from two aspects of static efficiency evaluation and dynamic efficiency evaluation.

Prior research has emphasised the importance of the early phases of construction projects, as well as the difficulties of procuring engineering services – especially due to the uncertainties. Despite that, studies on the public procurement of engineering services are scarce. Although scholars have shown that uncertainty may affect the choice of control modes, the level of uncertainty that characterises services is not addressed by the two task characteristics: knowledge of the transformation process and output measurability. The purpose is to investigate organisational control in public procurement of engineering services.

The existing control model was adjusted in this study by conceptually adding uncertainty as a third aspect to the two task characteristics. A single case study of the Swedish Transport Administration was used. The empirical data, comprising 14 interviews with managers from the client and engineering consulting companies, were analysed using flexible pattern matching and visual mapping approaches and then illustrated using the model.

The public client did not base its choice of control modes on uncertainty, but rather on the other two task characteristics. Consequently, the service providers argued that the chosen control modes reduced their creativity, increased their financial risks and caused unclear responsibilities. This study therefore shows that uncertainty is an important factor to consider in the choice of control modes, both from a theoretical perspective and from the service providers' point of view. The developed model may therefore be useful for researchers as well as practitioners.

This study is the first attempt to add uncertainty as a task characteristic when choosing control modes. The results contribute to the scarce control literature regarding the procurement of engineering services for construction projects and the procurement of other services with high uncertainty.

This study aims at evaluating the technical efficiency (TE) of healthcare systems in the Arab region and exploring the key factors that affect the efficiency performance.

The study applies a two-stage Data Envelopment Analysis (DEA) approach to a sample of 20 Arab countries. In the first stage, a DEA model is used to calculate the TE scores of the examined healthcare systems in 2019 and 2010, following both the output and input orientations of efficiency. In the second stage, a censored Tobit model is estimated to investigate the determinants of healthcare efficiency.

DEA results of 2019 indicate that achievable efficiency gains of the Arab countries range from 0.4% to 16% under the output and input orientations, respectively. Six countries are efficient under both orientations. Although the average efficiency scores of the Arab countries have deteriorated between 2010 and 2019, Djibouti and Sudan had the greatest efficiency improvements between the two years. Bahrain, Mauritania, Morocco and Qatar proved to be efficient in 2010 and 2019 under the two orientations of efficiency and according to the two DEA specifications followed. The Tobit model reveals that corruption and government health expenditure tend to have an adverse impact on healthcare efficiency.

The author evaluates healthcare efficiency and healthcare's efficiency determinants in the Arab countries. Regardless Arab countries' diversity, these countries are facing common health challenges, including diminishing role of governments in healthcare financing; increased out-of-pocket healthcare spending; poor healthcare outputs and prevalence of health inequities resulting from weak governance institutions. Comparing the efficiency of healthcare systems between 2010 and 2019 gives insights on the potential impact of the Arab spring uprisings on healthcare efficiency. Moreover, examining the determinants of healthcare efficiency allows for better understanding of how to improve the efficiency of healthcare systems in the region.

This paper is a dedication to Professor Ngo Van Long who introduced the idea of Kant–Nash equilibrium. The author extends this analysis to the study of adult and child labor markets.

This is a game theoretic analysis of the market for adult and child workers when some firms behave in the neoclassical Nashian way and some firms follow a Kantian social norm.

The presence of Kantian firms in the output market in addition to Nashian lowers industry output and labor demand. This raises the possibility that Kantian behavior in the output market could lower wages sufficiently and increase the incidence of child labor. If firms engage in Kantian behavior in the labor market by not hiring child workers, adult wage rises but could lower child wage as children if they work can only work for Nashian firms. When labor demand is sufficiently high, more Kantians could raise adult wage above subsistence and eliminate child labor supply.

This is the first paper to apply Kant–Nash equilibrium to the labor market. The result that Kantian behavior could have an unintended negative spillover effect in other markets is new. The paper keeps alive the ideas of Professor Long, which hopefully will stimulate further work and build on his ideas.

This article aims to investigate the financial constraints and nonlinearity of farm size growth.

Farm size growth is measured with land, labor and output using data from the Farm Accountancy Data Network (FADN) for Hungary and Slovenia. A dynamic panel model is applied to assess financial constraints and nonlinearity of farm size growth.

Results show that, except for land in Slovenia and output in Hungary, liquidity constraints are less important for farm size growth than endogenous factors based on farm size growth expectations and steady farm size restructuring. Smaller farms are growing faster than larger ones. The hypothesis that a higher level of subsidies would increase farm size is not supported for Hungary. When farms reach a certain size, the land area of the largest farms increases. Farm debts in Hungary are linked with land growth and in Slovenia with output growth.

Further research on the impact of liquidity constraints and subsidies can be conducted at a disaggregate farm-type level to examine whether there is variability in the underlying interlinkages at the farm-type specialization level.

The implication that farm size growth is dependent on initial size and that smaller farms are growing faster than bigger ones indicates that it is not necessary to favor the fastest growing smaller farms thus supports the application of a non-discriminatory farm size policy for observing farm size structural changes.

The dynamic panel econometric model that incorporates cash flow as a measure of financial constraints provides insight into farm size growth in cross-country comparison in relation to potential farm liquidity constraints, farm debt and the nonlinearity of farm size, which information is of relevance to policy makers and practitioners.

In this paper, the heterogeneity of the linkages among financial development, productivity and growth across income groups is emphasized.

An empirical analysis is conducted with an illustrative sample of 130 economies over the period 1991–2019 and classified into four subsamples: Organisation for Economic Co-operation and Development (OECD), developing, least developed and net food importing developing countries. Forecast error variance decompositions and panel vector auto-regressive estimations are computed, with insightful findings.

Higher levels of output stimulate the economic development in the agricultural sector, mainly via the productivity channel and, in the most developed economies, also through access to credit. Differently, in developing and least developed economies, the role of access to credit is marginal. The findings have practical implications for stakeholders involved in the planning of long-run investments. In less developed economies, priorities should be given to investments in technology and innovation, whereas financial markets are more suited to boost the development of the agricultural sector of developed economies.

The authors conclude on the credit–output–productivity nexus and contribute to the literature in (at least) three ways. First, they assess how credit access, agricultural output and agricultural productivity are jointly determined. Second, they use a novel approach, which departs from most of the case studies based on single-country data. Third, they conclude on potential causality links to conclude on policy implications.

The purpose of this study is to analyze the environmental efficiency level and trend of the transportation sector in the upper–mid–downstream of the Yangtze River Economic Belt and the JingJinJi region in China and assess the effectiveness of policies for protecting the low-carbon environment.

This study uses the meta-frontier slack-based measure (SBM) approach to evaluate environmental efficiency, which targets and classifies specific regions into regional groups. First, this study employs the SBM with the undesirable outputs to construct the environmental efficiency measurement models of the four regions under the meta-frontier and group frontiers, respectively. Then, this study uses the technology gap ratio to evaluate the gap between the group frontier and the meta-frontier.

The analysis reveals several key findings: (1) the JingJinJi region and the downstream of the YEB had achieved the overall optimal production technology in transportation than the other two regions; (2) significant technology gaps in environmental efficiency were observed among these four regions in China; and (3) the downstream region of the YEB exhibited the lowest levels of energy consumption and excessive CO₂ emissions.

To evaluate the differences in environmental efficiency resulting from regions and technological gaps in transportation, this study employs the meta-frontier model, which overcomes the limitation of traditional environmental efficiency methods. Furthermore, in the practical, the study provides the advantage of observing the disparities in transportation efficiency performed by the Yangtze River Economic Belt and the Beijing–Tianjin–Hebei regions.

The article aims to establish whether the degree of aversion to inflation and the responsiveness to deviations from potential output have changed over time.

This paper assesses time variation in monetary policy rules by applying a time-varying parameter generalised methods of moments (TVP-GMM) framework.

Using monthly data until December 2022 for five inflation targeting countries (the UK, Canada, Australia, New Zealand, Sweden) and five countries with alternative monetary regimes (the US, Japan, Denmark, the Euro Area, Switzerland), we find that monetary policy has become more averse to inflation and more responsive to the output gap in both sets of countries over time. In particular, there has been a clear shift in inflation targeting countries towards a more hawkish stance on inflation since the adoption of this regime and a greater response to both inflation and the output gap in most countries after the global financial crisis, which indicates a stronger reliance on monetary rules to stabilise the economy in recent years. It also appears that inflation targeting countries pay greater attention to the exchange rate pass-through channel when setting interest rates. Finally, monetary surprises do not seem to be an important determinant of the evolution over time of the Taylor rule parameters, which suggests a high degree of monetary policy transparency in the countries under examination.

It provides new evidence on changes over time in monetary policy rules.

The paper aims at addressing the following research questions: does institutional quality improve countries' environmental efficiency? And which pillars of institutional quality improve countries' environmental efficiency?

By specifying a directional distance function in the context of stochastic frontier method where GHG emissions are considered as the bad output and the GDP is referred as the desirable one, the work computes the environmental efficiency into the appraisal of a production function for the European countries over three decades.

According to the countries' performance, the findings confirm that high and upper middle-income countries have higher environmental efficiency compared to low middle-income countries. In this environmental context, the role of institutional quality turns out to be really important in improving the environmental efficiency for high income countries.

This article attempts to analyze the role of different dimensions of institutional quality in different European countries' performance – in terms of mitigating GHGs (undesirable output) – while trying to raise their economic performance through their GDP (desirable output).

1. The paper aims at addressing the following research question: does institutional quality improve countries' environmental efficiency?

2. We adopt a directional distance function in the context of stochastic frontier method, considering 40 European economies over a 30-year time interval.

3. The findings confirm that high and upper middle-income countries have higher environmental efficiency compared to low middle-income countries.

4. The role of institutional quality turns out to be really important in improving the environmental efficiency for high income countries, while the performance decreases for the low middle-income countries.

The paper aims at addressing the following research question: does institutional quality improve countries' environmental efficiency?

We adopt a directional distance function in the context of stochastic frontier method, considering 40 European economies over a 30-year time interval.

The findings confirm that high and upper middle-income countries have higher environmental efficiency compared to low middle-income countries.

The role of institutional quality turns out to be really important in improving the environmental efficiency for high income countries, while the performance decreases for the low middle-income countries.