Search results

The paper aims to determine the thermal comfort perception of schoolchildren from a warm and humid environment. There is a concern about the effect of high temperature on the health and academic performance of schoolchildren.

Objective and subjective methodological approaches were adopted to collect data during the fieldwork in the selected primary schools. ASHRAE adaptive comfort model was adopted to analyze the data.

The paper provided empirical results about the comfort requirements of schoolchildren from the warm and humid environment. During the occupied school time, the studied schoolchildren were found to tolerate temperatures higher than the upper limit temperature recommended by ASHRAE Standard 55. The paper recommends that the studied children may not need any active ventilator to be thermally comfortable during the occupied school hours

The paper found the range of temperatures that schoolchildren from the warm and humid environment can adapt to. The information may be useful to architects, engineers and facility managers

Occupant behavior can lead to considerable uncertainties in thermal comfort and air quality within buildings. To tackle this challenge, the use of probabilistic controls to simulate occupant behavior has emerged as a potential solution. This study seeks to analyze the performance of free-running households by examining adaptive thermal comfort and CO2 concentration, both crucial variables in indoor air quality. The investigation of indoor environment dynamics caused by the occupants' behavior, especially after the COVID-19 pandemic, became increasingly important. Specifically, it investigates 13 distinct window and shading control strategies in courtyard houses to identify the factors that prompt occupants to interact with shading and windows and determine which control approach effectively minimizes the performance gap.

This paper compares commonly used deterministic and probabilistic control functions and their effects on occupant comfort and indoor air quality in four zones surrounding a courtyard. The zones are differentiated by windows facing the courtyard. The study utilizes the energy management system (EMS) functionality of EnergyPlus within an algorithmic interface called Ladybug Tools. By modifying geometrical dimensions, orientation, window-to-wall ratio (WWR) and window operable fraction, a total of 465 cases are analyzed to identify effective control scenarios. According to the literature, these factors were selected because of their potential significant impact on occupants’ thermal comfort and indoor air quality, in addition to the natural ventilation flow rate. Additionally, the Random Forest algorithm is employed to estimate the individual impact of each control scenario on indoor thermal comfort and air quality metrics, including operative temperature and CO2 concentration.

The findings of the study confirmed that both deterministic and probabilistic window control algorithms were effective in reducing thermal discomfort hours, with reductions of 56.7 and 41.1%, respectively. Deterministic shading controls resulted in a reduction of 18.5%. Implementing the window control strategies led to a significant decrease of 87.8% in indoor CO2 concentration. The sensitivity analysis revealed that outdoor temperature exhibited the strongest positive correlation with indoor operative temperature while showing a negative correlation with indoor CO2 concentration. Furthermore, zone orientation and length were identified as the most influential design variables in achieving the desired performance outcomes.

It’s important to acknowledge the limitations of this study. Firstly, the potential impact of air circulation through the central zone was not considered. Secondly, the investigated control scenarios may have different impacts on air-conditioned buildings, especially when considering energy consumption. Thirdly, the study heavily relied on simulation tools and algorithms, which may limit its real-world applicability. The accuracy of the simulations depends on the quality of the input data and the assumptions made in the models. Fourthly, the case study is hypothetical in nature to be able to compare different control scenarios and their implications. Lastly, the comparative analysis was limited to a specific climate, which may restrict the generalizability of the findings in different climates.

Occupant behavior represents a significant source of uncertainty, particularly during the early stages of design. This study aims to offer a comparative analysis of various deterministic and probabilistic control scenarios that are based on occupant behavior. The study evaluates the effectiveness and validity of these proposed control scenarios, providing valuable insights for design decision-making.

The purpose of this paper is to analyse thermal comfort and the thermal environment in naturally ventilated classrooms. Specifically, the aims of the study were to identify the thermal environment and thermal comfort of respondents in naturally ventilated university classrooms and compare them with the ASHRAE and Indonesian National Standard (SNI); to check on whether the predicted mean vote (PMV) model is applicable or not for predicting the thermal comfort of occupants in naturally ventilated university classrooms; and to analyse the neutral temperature of occupants in the naturally ventilated university classrooms.

The study was carried out at the new campus of Faculty of Engineering, Hasanuddin University, Gowa campus. A number of field surveys, which measured thermal environments, namely, air temperature, mean radiant temperature (MRT), relative humidity, and air velocity, were carried out. The personal activity and clothing properties were also recorded. At the same time, respondents were asked to fill a questionnaire to obtain their thermal sensation votes (TSV) and thermal comfort votes (TCV), thermal preference, and thermal acceptance. A total of 118 respondents participated in the study. Before the survey was conducted, a brief explanation was provided to the participants to ensure that they understood the study objectives and also how to fill in the questionnaires.

The results indicated that the surveyed classrooms had higher thermal environments than those specified in the well-known ASHRAE standard and Indonesian National Standard (SNI). However, this condition did not make respondents feel uncomfortable because a large proportion of respondents voted within the comfort zone (+1, 0, and −1). The predictive mean vote using the PMV model was higher than the respondents’ votes either by TSV or by TCV. There was a huge difference between neutral temperature using operative temperature (T_o) and air temperature (T_a). This difference may have been because of the small value of MRT recorded in the measured classrooms.

The research shows that the use of the PMV model in predicting thermal comfort in the tropic region might be misleading. This is because PMV mostly overestimates the TSV and TCV of the respondents. People in the tropic region are more tolerant to a higher temperature. On the basis of this finding, there is a need to develop a new thermal comfort model for university classrooms that is particularly optimal for this tropical area.

The purpose of this paper is to examine the seasonal performance, occupants’ comfort and cold stress in cross-laminated timber school buildings located in the USA (Northeast region).

The Fall survey was done from October–November 2017. In the Winter, it was considered from December 2017–February 2018. The study measured environmental parameters in the chosen spaces. The research applied the wet-bulb globe temperature (WBGT) model to determine the indexes in various seasons.

In the Fall, the average inside temperature was 21.2°C, the average RH was 50.7 per cent, and the mean dew-point was 9.3°C. The mean inside temperature was 20.5°C in the Winter while the mean RH was 23.9 per cent and the average dew-point was −1.9°C. The overall mean inside temperatures in both seasons were within the ASHRAE comfort temperature limits for cold seasons. During the surveys, higher average values of temperature, RH and dew-point were measured in the offices than the other spaces.

The research showed people might be subject to lower temperatures in the hall than the other spaces. Some design parameters and occupation hours may contribute to the lower temperatures reported in the hall than the different spaces.

The study proposes the WBGT of 16.0°C and 13.7°C as the stress indexes in the Fall and Winter seasons correspondingly. Last, the research suggests a WBGT of 14.9°C as the overall mean stress index within the spaces considered in this study.

Occupants dwelling in hot climatic regions of India for a longer term are tolerable to high temperature levels than predicted by American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) standards. The purpose of this study is to evaluate the thermal sensations (TS) and neutral temperature of the occupants in naturally ventilated (NV) and air-conditioned (AC) classrooms of two technical institutions located in the same premises in the suburbs of Madurai. The main focus of this study is to understand the occupants’ behaviour in response to the thermal conditions of the educational buildings particularly in the warm and humid climatic zone of Madurai.

This research collected data through field studies. The data included 383 survey questionnaires from NV classrooms and 285 from AC classrooms, as well as on-site measurements of interior and exterior weather conditions. The TS results show that the students preferred well-designed NV classrooms than AC classrooms. A new adaptive comfort equation derived from this study can be applied to NV classrooms in warm and humid climates where mean outdoor temperature exceeds 40°C.

The neutral temperature derived for NV classrooms in Madurai ranged from 29°C to 34°C. Thus, the occupants in the NV classrooms of the higher learning educational institutions in the warm and humid climatic region of Madurai can adapt well to higher indoor temperature levels than predicted by ASHRAE comfort levels with minimum adjustments.

The study was limited to only occupants in two premier higher learning technical educational institutions located in Madurai region within 5–10 km within the city limits to understand the implications of microclimate with respect to the urban context. Thus, further research is required to examine the tendency under local conditions in other regions beyond those applied to this study.

The findings of this study showed that occupants in higher learning educational intuitions in Madurai prefer NV classrooms than AC classrooms. Therefore, with rising demands of energy use for mechanical ventilation and the associated high cost for running AC buildings, architects should prioritize the design of energy efficient buildings through the optimal use of passive design strategies for ventilation and thermal comfort. This study gives a base data for architects to understand the adaptive limitations of occupants and design NV buildings that can promote natural ventilation and provide better thermal environments that can help increase the productivity of students.

This paper was an attempt to develop the adaptive comfort model for NV classrooms in Madurai regions. There has been no attempt to identify the adaptive comfort levels of occupants in higher learning technical educational institutions located in warm and humid climatic region of India.

This paper aims to develop a deep characterization of PA‐Al₂O₃ composite for selective laser sintering (SLS). Tension test is used to determine main mechanical characteristics of the material, both at room temperature and at 100°C. An accurate knowledge of the parts' performances as a function of the building orientation, is fundamental to understand the manufacturing anisotropy. Particular attention is dedicated to the joining and failure micromechanisms ruling the macroscopic characteristics, on the basis of the knowledge developed by the authors on SLS of both metal and polymeric powders.

Specimens have been built with different orientations in regard to powder deposition plane and laser path. Tension test is used to determine main mechanical characteristics of the material, both at room temperature and at 100°C. A particular attention is dedicated to the joining and failure micromechanisms ruling the macroscopic characteristics of the composite material by means of optical and scanning electron microscope (SEM) observations.

The sintered material shows an evident anisotropy in the growth direction (z‐axis), as well as it seems to be not sensitive to the sintering direction at room temperature (x, y, xy). At 100°C the effect of sintering direction becomes more evident and a different behaviour results considering x‐ and y‐direction, respectively. Accurate SEM characterization has been carried out to understand the effect of the manufacturing anisotropy on the mechanical performances, both in terms of additive construction and laser sintering strategy. The observation of the rupture surfaces showed that cracks originate from the external surface and propagate initially by the ductile failure of the polymeric matrix, up to the sudden fracture of the whole section.

Previous studies concerning polyamide charged parts confirm the importance of fabrication parameters and geometry on the final performances, due to anisotropic heat supply and transfer phenomena. The originality of the paper is in the investigation on both at room temperature and at 100°C. Moreover, a model is proposed where it is hypothesized that the layer‐by‐layer construction is only marginally responsible of the anisotropic behaviour of the material.

In this chapter the potential to use water-based Trombe walls to provide heated water for building applications during the summer months is investigated. Design Builder software is used to model a simple single-story building with a south-facing Trombe wall. The effects of using different thermal storage mediums within the Trombe wall on building heating loads during the winter and building cooling loads during the summer are modeled. The amount of thermal energy stored and temperature of water within the thermal storage medium during hot weather conditions were also simulated. On a sunny day on Toronto, Canada, the average temperature of the water in a Trombe wall integrated into a single-story building can reach ∼57°C, which is high enough to provide for the main hot water usages in buildings. Furthermore, the amount of water heated is three times greater than that required in an average household in Canada. The results from this work suggest that water-based Trombe walls have great potential to enhance the flexibility and utility of Trombe walls by providing heated water for building applications during summer months, without compromising performance during winter months.

Comfortable outdoor workspaces are important for employees in business parks and urban areas. Prioritizing a pleasant thermal environment is essential for employee productivity, as well as the improvement of outdoor spaces between office buildings to enhance social activities and quality of outdoor workplaces in a hot arid climate has been subjected to very little studies Thus, this study focuses on business parks (BPs) landscape elements. The objective of this study is to enhance the user's thermal comfort in the work environment, especially in the outdoors attached to the administrative and office buildings such as the BPs.

This research follows Four-phases methodology. Phase 1 is the investigation of the literature review including the Concept and consideration of BP urban planning, Achieving outdoor thermal comfort (OTC) and shading elements analysis. Phase 2 is the case study initial analysis targeting for prioritizing zones for shading involves three main methods: social assessment, geometrical assessment and environmental assessment. Phase 3 entails selecting shading elements that are suitable for the zones requiring shading parametrize the selected shading elements. Phase 4 focuses on the optimization of OTC through shading arrangements for the prioritized zones.

Shading design is a multidimensional process that requires consideration of various factors, including social aspects, environmental impact and structural integrity. Shading elements in urban areas play a crucial role in mitigating heat stress by effectively shielding surfaces from solar radiation. The integration of parametric design and computational optimization techniques enhances the shading design process by generating a wide range of alternative solutions.

While conducting this research, it is important to acknowledge certain limitations that may affect the generalizability and scope of the findings. One significant limitation lies in the use of the shade audit method as a tool to prioritize zones for shading. Although the shade audit approach offers practical benefits for designers compared to using questionnaires, it may have its own inherent biases or may not capture the full complexity of human preferences and needs.

Few studies have focused on optimizing the type and location of devices that shade outdoor spaces. As a result, there is no consensus on the workflow that should regulate the design of outdoor shading installations in terms of microclimate and human thermal comfort, therefore testing parametric shading scenarios for open spaces between office buildings to increase the benefit of the outer environment is very important. The study synthesizes OTC strategies by filling the research gap through the implementation of a proper workflow that utilizes parametric thermal comfort.

The purpose of this research is using materials to improve the thermal insulation, and reducing the cost. A large amount of energy is consumed by masonary due to cooling and heating. Adding material with certain percentages to the building materials is one of the ways to improve the thermal insulation, and these additives should keep as much as possible the mechanical properties of the building materials. Carbon additives are one of commonly used materials to masonry materials. In spite of the many advantages of using carbon fibers and carbon nano tubes (CNTs) to the cementitious materials, they are very expansive and their thermal conductivity is high.

In this research charcoal (which is a product of burning process) with very low thermal conductivity and cost in the form of micro particles will be used with mortar and compared with short carbon fibers and multiwall carbon nanotubes (MWCNTs) via thermal conductivity, density and compressive strength tests. This research includes also an effort to build a model of building to evaluate the thermal insulation of the materials used in the practical part. The main building design and performance simulation tool in this research is DesignBuilder.

Results showed that adding micro charcoal particles to mortar resulted in improving the thermal insulation and decrease the rate of reduction in the compressive strength compared to other additives, while adding short carbon fibers resulted in improving the thermal insulation and decrease the compressive strength. Adding MWCNT to the mortar had a negative effect on mechanical and physical properties, i.e. compressive strength, density and thermal insulation.

This paper uses DesignBuilder software to design a model of building made from the materials used in the practical part to predict and evaluate the thermal insulation.

The paper aims to clarify the relationship between energy flexibility and building components and technologies. It determines the energy flexibility potential of buildings in relation to their physical characteristics and heat supply systems with respect to external boundary conditions.

The emphasis of the evaluation is based on the timing and the amount of shiftable and storable thermal loads in buildings under defined indoor thermal comfort conditions. Dynamic building simulation is used to evaluate the potential of selected building characteristics to shift heating loads away from peak demand periods. Insights on the energy flexibility potential of individual technologies are gained by examining the thermal behaviour of single-zone simulation models as different input parameters are varied. For this purpose, parameters such as envelope qualities, construction materials, control systems for heating are modified.

The paper provides a comprehensive understanding of the influence of the different building parameters and their variations on their energy shifting potential under “laboratory conditions” with steady boundaries. It suggests that the investigated boundary conditions such as outside temperature, infiltration, envelope quality and user behaviour, which influence the heating load of a building, also influence the resulting potential for energy flexibility. The findings show that the combination of a slowly reacting heat transfer system, such as concrete core activation and a readily available storage mass in the room, and a high insulation standard proved to have a high potential to shift heating loads.

In this paper, energy-flexible components were evaluated in a steady-state simulation approach. Outside temperature, solar irradiation and internal loads over the simulation duration were set constant over time to provide laboratory conditions for the potential analysis. On the basis of both duration and performance of the load shifting or storage event, the components were then quantified in a parametric simulation. The determined energy flexibility is directly related to the power of the heating, cooling, hot water and ventilation system, which can be switched on or off. In general, it can be seen that high power (high loads) demand usually can be switched on and off for a short duration, and low power demand usually for a longer duration. The investigated boundary conditions such as outside temperature, infiltration, envelope quality and user behaviour, which influence the load of a building, also influence the resulting potential for energy flexibility. Higher insulation standards, for example, lead to lower loads that can be switched on or off, but increase the duration of the event (flexibility time). So that, in particular, the shiftable load potential is low but results in a long switch-off duration. Furthermore, passive storage potential in buildings like the storage mass inside the room and the type of heat/cooling transfer system can affect the flexibility potential by more than three times. Especially the combination of a high storage mass and a concrete core heat transfer system can significantly increase the flexibility.