Search results

Due to the ongoing Covid-19 pandemic, ventilation in a small cabin where social distancing cannot be guaranteed is extremely important. This study aims to find out the best configuration of open and closed windows in a moving car at varying speeds to improve the ventilation efficiency. The effectiveness of other mitigation measures including face masks, taxi screens and air conditioning (AC) systems are also evaluated.

Each window is given three opening levels: fully open, half open and fully closed. For a car with four windows, this yields 81 different configurations. The location of virus source is also considered, either emitting from the driver or from the rear seat passenger. Then three different travelling speeds, 5 m/s, 10 m/s and 15 m/s, are examined for the window opening/closing configurations that provide the best ventilation effect. A study into the effectiveness of face masks is realised by adjusting virus injection amounts; and the simulation of taxi screens and AC system simply requires a small modification to the car model.

The numerical studies identify the top window opening/closing configurations that provide the most efficient ventilation at different moving speeds, along with a comprehensive ranking list. The results show that fully opening all windows is not always the best choice. Simulations evaluating other mitigation measures confirm good effect of face masks and poor performance of taxi screens and AC systems.

This work is the first large-scale numerical simulation and parametric study about different window opening/closing configurations of a moving car. The results provide useful guides for travellers in shared cars to mitigate Covid-19 transmission risks. The findings are helpful to both individuals' health and society's recovery in the Covid-19 era and they also provide useful information to protect people from other respiratory infectious diseases such as influenza.

High levels of interior water vapour lead to condensation and black mould that in turn represent significant risks to residential properties and their occupants. Beliefs about window opening are good predictors of the degree to which householders will actually open windows to purge their homes of water vapour, including water vapour that they themselves generate. The present study tested if a short information-giving intervention could enhance householders’ beliefs that foster window opening as purge ventilation and, in turn, lead to greater window opening.

Data were collected from 242 UK householders with robust psychometrically sound measures embedded in an online self-report survey that also presented the intervention information.

The intervention led participants, and males in particular, to have significantly greater concerns about condensation and mould and significantly less concerns about heat loss costs arising from opening windows, and these altered beliefs in turn predicted a greater intention to open windows in the future.

By sharing simple information, surveyors and other building professionals can help householders take the simple step of opening their windows and so reduce the threats that condensation and mould present to themselves and their homes.

This is the first study to test (1) a time-based model that predicted the intervention would have a positive effect on specific window opening attitudes and that those new attitudes would in turn affect window opening intentions, and (2) if the intervention had different effects on men and women.

The purpose of this paper is to propose a comprehensive theoretical framework to explain the different diffusion dynamics of a technology realized under an open source (OS) regime vs a technology realized under a closed-proprietary (CP) regime.

Following a systematic combining approach, theoretical predictions derived from literature on diffusion of innovation and on open innovation were matched with empirical observations derived from a case study of two mobile operation systems, which were released under different technological regimes.

This paper proposes a theoretical framework and a set of original theoretical propositions that can help to explain the differences in the diffusion dynamics of technologies that are released under different regimes (i.e. CP vs OS).

This paper provides managers a better understanding of the diffusion dynamics of technologies released according to an open innovation strategy. In addition, the empirical case study improves the understanding of an important industry (the MOS industry) that has not been fully investigated from the innovation diffusion perspective. Nevertheless, the efficacy and generalizability of the theoretical framework proposed in this paper require future empirical tests.

This paper makes an original contribution to the open innovation and innovation diffusion literature by linking, in a conceptual model, three antecedents of the diffusion of a new technology that previous literature has considered only separately: the regime under which the technology is released (OS vs CP), the contingencies related to the characteristics of the technology and to the network of its adopters, and the resulting barriers to adoption.

The effects of dust exposure in buildings and its health and comfort consequences continue to concern occupants, particularly those who spend most of their time indoors. This study examines the influence of building opening characteristics on surface dust loading in indoor environments to determine the dust particles' impact on different opening configurations.

Indoor Harmattan dust surface loading data were collected from Maiduguri, Northeastern Nigeria, using model rooms with six different window configurations. A simple mathematical relationship was employed to assess surface dust loading characteristics in the model rooms. The study measured dust thrice between December and February for three days (72 h). The results were analyzed using descriptive statistics.

The results determined the highest average surface dust loading of 12.03 g/m2 in the room with awning windows at an indoor-to-outdoor (I/O) ratio of 0.7. In contrast, the experiment in the room with a closed window recorded the lowest average surface dust loading of 5.24 g/m2 at an I/O ratio of 0.30, which is infiltration. The outcomes further indicate that the average surface dust loading varies with the building opening type and position, as higher surface dust loadings were recorded in locations closer to the openings (doors and windows), reaffirming that the dominant source of the dust particles is outdoors. According to the study, dust incursion due to infiltration accounts for 30% of the outdoor surface loading.

Thus, Harmattan dust is a serious challenge to the health, productivity and hygiene of building occupants in the study area. The built-environment professionals must use the study's outcome to optimize building openings' designs (shape, size and form) for effective indoor dust control.

Occupant behavior can lead to considerable uncertainties in thermal comfort and air quality within buildings. To tackle this challenge, the use of probabilistic controls to simulate occupant behavior has emerged as a potential solution. This study seeks to analyze the performance of free-running households by examining adaptive thermal comfort and CO2 concentration, both crucial variables in indoor air quality. The investigation of indoor environment dynamics caused by the occupants' behavior, especially after the COVID-19 pandemic, became increasingly important. Specifically, it investigates 13 distinct window and shading control strategies in courtyard houses to identify the factors that prompt occupants to interact with shading and windows and determine which control approach effectively minimizes the performance gap.

This paper compares commonly used deterministic and probabilistic control functions and their effects on occupant comfort and indoor air quality in four zones surrounding a courtyard. The zones are differentiated by windows facing the courtyard. The study utilizes the energy management system (EMS) functionality of EnergyPlus within an algorithmic interface called Ladybug Tools. By modifying geometrical dimensions, orientation, window-to-wall ratio (WWR) and window operable fraction, a total of 465 cases are analyzed to identify effective control scenarios. According to the literature, these factors were selected because of their potential significant impact on occupants’ thermal comfort and indoor air quality, in addition to the natural ventilation flow rate. Additionally, the Random Forest algorithm is employed to estimate the individual impact of each control scenario on indoor thermal comfort and air quality metrics, including operative temperature and CO2 concentration.

The findings of the study confirmed that both deterministic and probabilistic window control algorithms were effective in reducing thermal discomfort hours, with reductions of 56.7 and 41.1%, respectively. Deterministic shading controls resulted in a reduction of 18.5%. Implementing the window control strategies led to a significant decrease of 87.8% in indoor CO2 concentration. The sensitivity analysis revealed that outdoor temperature exhibited the strongest positive correlation with indoor operative temperature while showing a negative correlation with indoor CO2 concentration. Furthermore, zone orientation and length were identified as the most influential design variables in achieving the desired performance outcomes.

It’s important to acknowledge the limitations of this study. Firstly, the potential impact of air circulation through the central zone was not considered. Secondly, the investigated control scenarios may have different impacts on air-conditioned buildings, especially when considering energy consumption. Thirdly, the study heavily relied on simulation tools and algorithms, which may limit its real-world applicability. The accuracy of the simulations depends on the quality of the input data and the assumptions made in the models. Fourthly, the case study is hypothetical in nature to be able to compare different control scenarios and their implications. Lastly, the comparative analysis was limited to a specific climate, which may restrict the generalizability of the findings in different climates.

Occupant behavior represents a significant source of uncertainty, particularly during the early stages of design. This study aims to offer a comparative analysis of various deterministic and probabilistic control scenarios that are based on occupant behavior. The study evaluates the effectiveness and validity of these proposed control scenarios, providing valuable insights for design decision-making.

Although it may be said that man sees the world through a window a surveyor can see much of the condition of a building in a window. From the narrow windows of the massive constructions of medieval times, the development of the structural frame with infill enabled windows to be enlarged. But it was the encouragement of the development of glass towards the end of the Middle Ages which enabled windows to throw light into the interior of the buildings and encouraged, the advancement of interior design and decoration.

While the Noble Quran dictates the prohibition of interest, conventional banks promote Islamic banking by opening Islamic banking windows. Against this backdrop, this study aims to investigate the perceived gaps between managers and clients in Islamic marketing and banking, focusing on conventional banks’ Islamic banking windows.

Guided by a qualitative approach, semi-structured personal interviews and observations served as the data collection methods, involving 25 banks and 50 respondents in 3 different districts, namely, Shirajganj, Rajshahi and Chapainawabganj of Bangladesh from January to October 2023. The data were analysed using ATLAS.ti 2023 to explore codes and quotations derived from 14 interview questions. Further, ATLAS.ti 2023 facilitated synthesizing content, concepts, code occurrence, network analysis and thematic analysis.

Islamic and non-Islamic banks use Quranic verses, hadiths (prophetic traditions), images of mosques, the Kaaba and Arabic texts as Islamic marketing tools. These spiritual, divine and prescriptive tools are associated with Islamic banking. However, conventional banks receive criticism for having separate Islamic banking windows to serve religiously conscious clients, which generates tension among clients and bank managers.

The findings can theoretically assist academics in examining conventional banks’ Islamic marketing and banking practices, opening Islamic banking windows. Importantly, Shariah boards can play policy roles in safeguarding the function of Islamic marketing and banking. Managers can use the findings to anticipate client perceptions and enhance Islamic marketing and banking strategies. Likewise, the social implications include the explicit stance of Shariah to mitigate the mixture of halal and haram banking.

This pioneering study explores the perspectives of Islamic banking windows by non-Islamic banks. The combination of Islamic marketing and banking is a noteworthy novelty in this study and deserves recognition for its unique contribution to halal marketing and finance.

Purpose – This chapter discusses the difference between a product strategy and a platform strategy, relying on examples from the history of Apple and Microsoft in personal computers and other devices as well as Sony and Japan Victor Corporation in videocassette recorders.

Design/methodology/approach – The chapter begins with a review of how the term “platform” has been used in the management literature and defines an industry-wide platform (as compared to an in-house company product platform) as a foundation technology (or service) that brings multiple parties in a market together for a common purpose. An industry-wide platform can generate powerful network effects between the platform and complementary products and services that make the platform increasingly valuable. Apple, with the Macintosh computer, and Sony with the Betamax VCR as well as other products, such as the Walkman media player, are examples of firms that developed excellent products but followed a product-first strategy and ended up losing in these markets or becoming niche players. They paid relatively little attention to opening up their technology to outside firms and cultivating an ecosystem of partners. Apple changed in the early 2000s with the iPod and iTunes, and then the iPhone and iPad, and has risen from near bankruptcy to become an enormously valuable and profitable platform leader.

Findings – Historical examples suggest that, in a platform market, the winner is not the firm with the best product, but rather the firm with the best platform – that is, the foundation technology or service that is most open to outsiders and which stimulates development of the most compelling complements.

Originality/value – This result extends the literature's understanding of platform strategy.

The purpose of this paper is to describe a programme of research into an innovative approach to whole‐house ventilation with heat reclaim. In order to save energy, houses are now required to be constructed to a high level of air tightness. This poses potential problems of indoor air quality, condensation and mould growth, with implications for human health. Adequate and controlled ventilation is a necessity, and in Europe the adoption of mechanical systems incorporating heat reclaim has become the preferred technology. The relatively mild climate of the UK undermines the efficiency of these fan‐driven solutions. The programme of research has been to test the viability of an engineered system of natural ventilation for use in temperate regions.

The system works by the combination of “supply air” windows and passive stacks. The windows have an air path for incoming ventilation that passes between panes of glass, the pressure drop across the windows to induce the air flow through them is provided by the passive stacks in kitchens and bathrooms. Passive stacks are an alternative to the use of extract fans; they have been included in the building regulations since their efficacy was proven by research carried out at the Building Research Establishment in the 1980s. “Supply air” windows are manufactured in Finland, and have also been researched in Canada. The research described in this paper is the first to combine “supply air” windows and passive stacks to form a system that is completely natural and operates without the use of electricity. It has been carried out over the course of a number of projects. Beginning with laboratory studies that established the design dimensions for the windows, followed by test cell measurements, and then installation in real buildings monitored, both empty and occupied. Each stage was validated in relation to simulation models.

It was demonstrated that window U‐values of down to 0.6 W/m²/°C can be achieved. It has been demonstrated in real building applications that a reduction in overall household heating consumption of 20 per cent is attained in dwellings where the system has been installed. User approval, which was the focus of the later projects carried out in Norwich, has also been high.

The windows have no special installation requirements and passive stacks are a catalogue component. The windows are designed as two separate sashes that are locked together by catches that can be undone to clean the space between the panes. The system is an alternative to mechanical ventilation heat reclaim systems, it is a simple low maintenance, low‐cost method that offers good indoor air quality as well as energy advantages, which has been shown to be particularly suited to the typical winter climate conditions in the UK.