Search results

The purpose of this paper is agile attitude control design with the novel three-dimensional (3D) magnetically suspended wheel (MSW) that is the preferred type for agile maneuvering compared to conventional control moment gyro due to frictionless, low vibration and long lifetime. This system does not require a separate steering law for pyramid arrangement to derive tilt angles. It is also conducting an agile maneuver with high accuracy despite the high-frequency disturbances.

In this paper, a disturbance observer-based attitude stabilization method is proposed for an agile satellite with a pyramid cluster of the novel 3D magnetically suspended wheel actuator. This strategy includes a disturbance observer and a linear quadratic regulator controller. The rotor shaft deflection of MSW is actively controlled to reduce vibration and producing gyro torque. The deflection angle of the pyramid cluster MSWs considered as control parameters. The closed-loop stability is proved by using the Lyapunov strategy. The efficiency and performance of the offered method verified by numerical simulation via MATLAB/SIMULINK software.

According to simulation results, the disturbance observer-based control controller stabilized the system with high accuracy and optimal tilt angles without any extra steering law equation. Hence, the system speed is increased, and the system error is minimized without separate steering law.

The magnetically suspended wheel is a new kind of inertia actuator for attitude control that has several benefits such as frictionless, high-speed rotor, clean environment and low vibration compared to the traditional wheel. It has complex nonlinear dynamics that cause have complicated controller design. The proposed strategy stabilizes the system and conducting an agile maneuver with high precision despite the high-frequency disturbances. It is applicable for some missions requiring high accuracies, like Earth observation and the solar observation mission that require a very accurate pointing control and a long lifetime.

This paper is the initial paper to design a pyramid array for magnetically suspended wheels. Compared to other research, this method doesn’t need a separate steering law of the MSWs cluster and presented optimal tilt angles with less computational. Also, it designs a disturbance observer-based controller for this system that proposed high accuracy and agile stabilization.

Humanoid robots have been utilized in many fields such as medical, construction, and disaster response. While humanoid robots nowadays can achieve great capabilities, the one-leg balancing task still poses a challenging problem. This paper aims to propose a novel approach to solve the problem.

To aid the balance of one leg in humanoid robot, an external balance mechanism is inserted to the back of the humanoid robot. First, a dynamic model of the humanoid robot with balance mechanism and its simplified model are introduced. Second, a backstepping-based control method is utilized to build the proposed controller for one-leg stance system through two steps. For the first step, a minimum observer-based controller with a virtual control input is used to control the first sub-system reaching the desired reference input. For the second step, a virtual control input is considered as a reference input of a second sub-system, then a model reference adaptive controller (MRAC) is employed to control the second sub-system reaching the virtual control input in presence of uncertainties. By using the external balance mechanism, the sideway balancing task is separated from normal walking function. Furthermore, the utilization of the balance mechanism ensures the humanoid robot's hip adduction does not exceed the threshold of a human when walking. Finally, a simulation study is carried out to evaluate the effectiveness of the proposed method.

This paper proposes a model reference adaptive control using state observer for balancing one leg of humanoid robot in stance phase that extends our previous research (Tran et al., 2021).

The main research contents have been introduced.

The purpose of this paper is to investigate the stabilization of unstable periodic orbits of Chua’s system using adaptive fuzzy sliding mode controllers with moving surface.

For this aim, the sliding mode controller and fuzzy systems are combined to achieve the stabilization. Then, the authors propose a moving sliding surface to improve robustness against uncertainties during the reaching phase, parameter variations and extraneous disturbances.

Afterward, the authors design a sliding observer to estimate the unmeasurable states which are used in the previously designed controller.

Numerical results are provided to show the effectiveness and robustness of the proposed method.

Considering the unmeasurable states of the systems and the previewed reference signal, a novel fuzzy observer-based preview controller, which is a mixed controller of the fuzzy observer-based controller, fuzzy integrator and preview controller, is considered to address the tracking control problem.

The authors employ an augmentation technique to construct an augmented error system for uncertain T-S fuzzy discrete-time systems with time-varying uncertainties. Additionally, the authors obtain the corresponding linear matrix inequality (LMI) conditions for designing the preview controller.

This paper discusses the preview tracking problem for nonlinear systems. First, considering the unmeasurable states of the systems and the previewed reference signal, a novel fuzzy observer-based preview controller, which is a mixed controller of the fuzzy observer-based controller, fuzzy integrator, and preview controller, is considered to address the tracking control problem. Then, using the fuzzy Lyapunov functional with the linear matrix inequality (LMI) technique, new sufficient conditions for the asymptotic stability of the augmented system are derived by applying the LMI technique. The preview controller and fuzzy observer can be designed in one step. Finally, a numerical example is used to illustrate the effectiveness of the results.

An augmented error system is successfully constructed by the state augmentation approach. A novel preview controller is designed to address the tracking control problem. The preview controller and fuzzy observer can be designed in one step.

The purpose of this paper is to propose development of a formation control algorithm by employing a nonlinear observer for compensating the delay in the sensor signal transmission to the controller arising due to packet dropout in acoustic medium.

A robust control law is developed using the sliding mode approach integrated with a communication consensus algorithm for achieving cooperative motion of acoustic underwater vehicles in a group ensuring the transfer of information among the AUVs. In acoustic medium, inter-vehicle communication is challenging for a group of AUVs deployed in formation because underwater channel encounter a number of constraints such as low data rate, packet delays and dropouts.

It is observed that the sliding mode control-unscented Kalman filter formation control exhibits superior control performance such as mitigating larger initial error of estimation and removing the use of the Jacobian matrices among the three controllers developed. The proposed nonlinear observer estimates the un-measureable states such as position in x, y and z-axes, heading, rudder and sturn angle, needed for generating the formation control. A simulation setup is realized to demonstrate the performance of the proposed observer-based formation controller. Simulations were performed in MATLAB and the obtained results are analysed and compared which envisage that the proposed control algorithm provides efficient formation control under the acoustic communication constraints.

Development of observer for achieving formation control of AUVs in underwater area – common reference velocity and error signals being available to all cooperating AUVs – UKO performs better based on initial error estimation and tracking the same path in shallow water area.

For most practical control system problems, the state variables of a system are not often available or measureable due to technical or economical constraints. In these cases, an observer-based controller design problem, which is involved with using the available information on inputs and outputs to reconstruct the unmeasured states, is desirable, and it has been wide investigated in many practical applications. However, the investigation on a discrete-time singular Markovian jumping system is few so far. This paper aims to consider an observer-based control problem for a discrete-time singular Markovian jumping system and provides a set of easy-used conditions to the proposed control law.

According to the connotation of the separation principle extended from linear systems, a mode-dependent observer and a state-feedback controller is designed and carried out independently via two sets of derived necessary and sufficient conditions in terms of linear matrix inequalities (LMIs).

A set of necessary and sufficient conditions for an admissibility analysis problem related to a discrete-time singular Markovian jumping system is derived to be a doctrinal foundation for the proposed design problems. A mode-dependent observer and a controller for such systems could be designed via two sets of strictly LMI-based synthesis conditions.

The proposed method can be applied to discrete-time singular Markovian jumping systems with transition probability p_ij > 0 rather than the ones with p_ii = 0.

The formulated problem and proposed methods have extensive applications in various fields such as power systems, electrical circuits, robot systems, chemical systems, networked control systems and interconnected large-scale systems. Take robotic networked control systems for example. It is recognized that the variance phenomena derived from network transmission, such as packets dropout, loss and disorder, are suitable for modeling as a system with Markovian jumping modes, while the dynamics of the robot systems can be described by singular systems. In addition, the packets dropout or loss might result in unreliable transmission signals which motivates an observer-based control problem.

Both of the resultant conditions of analysis and synthesis problems for a discrete-time singular Markovian jumping system are necessary and sufficient, and are formed in strict LMIs, which can be used and implemented easily via MATLAB toolbox.

This paper aims to investigate the feasibility of using the combination of Lorentz force and aerodynamic force as a propellantless control method for spacecraft formation.

It is assumed that each spacecraft is equipped with several large flat plates, which can rotate to produce aerodynamic force. Lorentz force can be achieved by modulating spacecraft’s electrostatic charge. An adaptive output feedback controller is designed based on a sliding mode observer to account for unknown uncertainties and the absence of relative velocity measurements. Aiming at distributing the control input, an optimal control allocation method is proposed to calculate the electrostatic charge of the Lorentz spacecraft and control commands for the atmospheric-based actuators.

Numerical examples are provided to demonstrate the effectiveness of the proposed control strategy in the presence of J₂ perturbations. Simulation results show that relative motion in a formation can be precisely controlled by the proposed propellantless control method under uncertainties and unavailability of velocity measurements.

The controllability of the system is not theoretically investigated in the current work.

The proposed control method introduced in this paper can be applied for small satellites formation in low Earth orbit.

The main contribution of the paper is the proposal of the propellantless control approach for satellite formation using the combination of Lorentz force and aerodynamic force, which can eliminate the requirement of the propulsion system.

A novel proportional integral derivative-extended state disturbance observer-based control (PID-ESDOBC) algorithm is proposed to solve the nonlinear hydrodynamics, parameters perturbation and external disturbance in yaw control of remote operated vehicles (ROVs). The effectiveness of PID-ESDOBC is verified through the experiments and the results indicate that the proposed method can effectively track the desired attitude and attenuate the external disturbance.

This study fully investigates the hydrodynamic model of ROVs and proposes a control-oriented hydrodynamic state space model of ROVs in yaw direction. Based on this, this study designs the PID-ESDOBC controller, whose stability is also analyzed through Kharitonov theorem and Mikhailov criterion. The conventional proportional-integral-derivative (PID) and active disturbance rejection control (ADRC) are compared with our method in our experiment.

In this paper, the authors address the nonlinear hydrodynamics, parameters perturbation and external disturbance problems of ROVs with multi-vector propulsion by using PID-ESDOBC control scheme. The advantage is that the nonlinearities and external disturbance can be estimated accurately and attenuate promptly without requiring the precise model of ROVs. Compared to PID and ADRC, both in overshoot and settling time, the improvement is 2X on average compared to conventional PID and ADRC in the pool experiment.

The delays occurred in the control process can be solved in the future work.

The attitude control is a kernel problem for ROVs. A precise kinematic and dynamic model for ROVs and an advanced control system are the key factors to obtain the better maneuverability in attitude control. The PID-ESDOBC method proposed in this paper can effectively attenuate nonlinearities and external disturbance, which leads to a quick response and good tracking performance to baseline controller.

The PID-ESDOBC algorithm proposed in this paper can be ensure the precise and fast maneuverability in attitude control of ROVs or other underwater equipment operating in the complex underwater environment. In this way, the robot can better perform undersea work and tasks.

The dynamics of the ROV and the nominal control model are investigated. A novel control scheme PID-ESDOBC is proposed to achieve rapidly yaw attitude tracking and effectively reject the external disturbance. The robustness of the controller is also analyzed which provides parameters tuning guidelines. The effectiveness of the proposed controller is experimental verified with a comparison by conventional PID, ADRC.

This paper’s aim is modeling and simulation of an advanced controller design for a novel mechatronics system that consists of a hydrostatic journal bearing with servo control. The proposed mechatronic system has more worth in tribology applications as compared to the traditional hydrostatic bearing which has limited efficiency and poor performance because of lower stiffness and load-carrying capacity. The proposed mechatronic system takes advantage of active lubrication to improve stiffness, rotor’s stability and load-carrying capacity.

The current work proposes extended state observer-based controller to control the active lubrication for hydrostatic journal bearing. The advantage of using observer is to estimate unknown state variables and lumped effects because of unmodeled dynamics, model uncertainties, and unknown external disturbances. The effectiveness of the proposed mechatronic system is checked against the traditional hydrostatic bearing.

Proposed mechatronics active hydrostatic journal bearing system is checked against traditional hydrostatic journal bearing. It is found that novel active hydrostatic journal bearing with servo control has good tribology performance factors such as stiffness, less rotor vibration, no wear and friction under starting conditions and high load-carrying capacity under different conditions of spindle speed, temperature, initial oil pressure and external disturbance. The result shows that proposed mechatronics system has more worth in rotary tribology applications.

The current manuscript designs a novel active hydrostatic journal bearing system with servo control. The mathematical model has advantages in term of estimating unknown state variables and lumped effects because of unmodeled dynamics, model uncertainties and unknown external disturbances. The result shows improvement in dynamic characteristics of a hydrostatic journal bearing under different dynamic conditions.

The purpose of this paper is to concern the design of a robust model predictive controller for distributed networked systems with transmission delays.

The overall system is composed of a number of interconnected nonlinear subsystems with time-varying transmission delays. A distributed networked system with transmission delays is modeled as a nonlinear system with a time-varying delay. Time delays appear in distributed systems due to the information transmission in the communication network or transport of material between the sub-plants. In real applications, the states may not be available directly and it could be a challenge to address the control problem in interconnected systems using a centralized architecture because of the constraints on the computational capabilities and the communication bandwidth. The controller design is characterized as an optimization problem of a “worst-case” objective function over an infinite moving horizon.

The aim is to propose control synthesis approach that depends on nonlinearity and time varying delay characteristics. The MPC problem is represented in a time varying delayed state feedback structure. Then the synthesis sufficient condition is provided in the form of a linear matrix inequality (LMI) optimization and is solved online at each time instant. In the rest, an LMI-based decentralized observer-based robust model predictive control strategy is proposed.

The authors develop RMPC strategies for a class of distributed networked systems with transmission delays using LMI-Based technique. To evaluate the applicability of the developed approach, the control design of a networked chemical reactor plant with two sub-plants is studied. The simulation results show the effectiveness of the proposed method.