Search results

This study examines the influence of the restriction parameters on the stability of a Jeffcott rotor supported by single‐row, six‐recessed hybrid bearings with orifice compensation. The Reynolds equation governing oil‐films is solved using the finite difference method, whilst the determination of stability of the Jeffcott rotor‐bearing system uses the Routh‐Hurwitz method. The load capacity, stability threshold, and the critical whirl ratio versus the changing restriction parameters, are each simulated for the shallow‐recessed bearing and the deep‐recessed bearing with various land‐width ratios. The simulation results indicate that with the appropriate design of restriction parameters and land‐width ratio, a deep‐recessed bearing may be relatively superior. Although the performance of a shallow‐recessed bearing is, by and large, superior to that of a deep‐recessed bearing, it does nevertheless hinge upon the design of both restrictor and bearing.

The present paper proposes a theoretical analysis of the stability characteristics of a rigid rotor‐hybrid bearing system. It is intended that on the basis of the numerical results drawn from this study, the optimal restriction parameter for stable operation can be determined for use in the bearing design process.

A rigid rotor supported by hybrid oil film bearings with six recesses and capillary‐compensated restrictors is studied. In order to facilitate the calculation of film dynamics, using the perturbation method, the Reynolds equation was linearized and subsequently solved using finite difference techniques, whilst the stability maps were determined by the Routh‐Hurwitz method.

The data reported here suggest that the stability characteristics of the rigid rotor‐bearing system could be improved by the use of shallow, dual‐recessed hybrid bearings with capillary compensation. For the same restriction parameter and the same land‐width ratio used in large eccentricity case the stability characteristics of a shallow‐recessed bearing is superior to that of a deep‐recessed bearing, however, a deep‐recessed bearing with a small land‐width ratio and a small restriction parameter can provide better stability than a shallow‐recessed bearing with a large land‐width ratio or with a large restriction parameter.

This study proposes an extensive database as a critical requirement in the design of hybrid bearings, in order to ensure that a rotor bearing system is operating stably.

The purpose of this paper is to study the influences of recess configurations on the performances of high-speed hybrid journal bearing. Hybrid journal bearing earns increasing attention in high-speed machine tool spindle owing to its intrinsic outstanding performances of low temperature rise and high stability.

To investigate the coupled effects of temperature, turbulence and the interaction between lubricant and journal/bearing bush, a thermal fluid-structure interaction approach is presented and validated by the experimental results.

Ladder-type recess has excellent tribological characteristics in decreasing temperature rise, improving stability and inhibiting cavitation, which are all beneficial to improve the performances of high-speed spindle system.

This work can be a valuable guide for the future high-speed hybrid journal bearing design.

The purpose of this paper is to investigate the static stiffness of hydrostatic bearings with three constant compensations in types of constant‐flow pump, capillary and orifice, and both single‐action and double‐action variable restrictors with cylindrical‐spool, tapered‐spool, and membrane types by film gradient and recess pressure.

This paper utilizes the equations of flow equilibrium to determine the variations of film thickness or displacement of loading table with respect to the varying of recess pressure. For a hydrostatic bearing whose recess pressures are controlled by compensations, the stiffness characteristics can be presented directly by these variations.

The usage range of recess pressure and compensation parameters should be selected to correspond to a variation with smallest gradient.

This paper proposes an extensive database as a critical requirement for the selection of types and parameters of the compensation as to yield the acceptable or optimized characteristics in design of hydrostatic bearings.

This paper aims to numerically investigate the influence of magnetic field and recess configurations on performance of hydrostatic thrust bearing. Electrically conducting fluid is supplied to bearing, operating in external magnetic field. Influences of recess geometric shapes (circular, rectangular, elliptical and triangular) and restrictor (capillary and orifice) are numerically examined on stead-state and dynamic performance characteristics of bearing.

Numerical simulation of hydrostatic thrust bearing has been performed using finite element (FE) method based on Galerkin’s technique. An iterative source code based on FE approach, Gauss–Siedel and Newton–Raphson method is used to compute steady-state and dynamic performance indices of bearings.

The presence of magnetic field is observed to be enhancing load-carrying capacity and damping coefficient of bearings. The effect is observed to be more pronounced at low value of Hartmann number, because of the saturation effect observed at higher values of Hartmann number. The enhancement in abovementioned performance indices is observed to be highly dependent on geometry of recess and restrictor.

This study presents a FE-based approach to numerically simulate a hydrostatic thrust bearing. It will help bearing designers and academician in selecting an appropriate recess shape, restrictor and strength of magnetic field, for obtaining optimum performance from hydrostatic thrust bearing.

The present investigation provides a coupled solution of modified Reynolds equation and restrictor equation, which is essential for accurately predicting the performance of hydrostatic thrust bearings.

This paper aims to describe a theoretical and experimental research concerning influence of recess shape on comprehensive lubrication performance of high speed and heavy load hydrostatic thrust bearing with a constant flow.

The lubrication performance of a hydrostatic thrust bearing with different recess shape under the working conditions of high speed and heavy load has been simulated by using computational fluid dynamics and finite volume method.

It is found that the comprehensive lubrication performance of a hydrostatic thrust bearing with circular recess is optimal. The results demonstrate that recess shape has a great influence on the lubrication performance of the hydrostatic thrust bearing.

The simulation results indicate that to get an improved performance from a hydrostatic thrust bearing with constant flow, a proper selection of the recess shape is essential.

This paper aims to study the static characteristics of the hydrostatic conical journal bearings by utilizing single-action membrane restrictors to compensate the working pressures of recesses.

The flow resistance network method is used to analyze the influences of load capacity and static stiffness of bearing with the design parameters, including the number of recesses, radial eccentricity ratio, axial displacement ratio, restriction constant, membrane compliance, length-diameter ratio, circumferential land width ratio, axial land width ratio and half of cone angle.

This study shows the infinite stiffness of the oil produced in the first and second recesses while single-action membrane restriction constant of 2 and 3, respectively, as well as in the fourth recess while single-action membrane restriction constant of 0.01 and 0.1, respectively.

This article provides the hydrostatic conical bearings in static and unbiased states for analyses of design parameters. The analyses ignore dynamic pressure effect and do not use the Reynolds equation, and assuming that each oil recesses pressure is constant.

The influences of the design parameters including the number of recesses, membrane restriction, membrane compliance, length-diameter ratio, half of con-angle, circumferential land width ratio, and axial land width ratio are discussed to the load capacity and static stiffness of conical bearing.

Based on the characteristics of the conical bearing through analysis, this article suggests the front bearing with hard membrane restrictor (capillary) and the back bearing with soft membrane restrictor are the most appropriate for axial stiffness.

The purpose of this paper is to describe a simulation and experimental research concerning the effect of recess depth on the lubrication performance of a hydrostatic thrust bearing by constant rate flow.

The computational fluid dynamics and finite volume method have been used to compute the lubrication characteristics of an annular recess hydrostatic thrust bearing with different recess depths. The performances are oil recess pressure, oil recess temperature and oil film velocity. The recess depth has been optimized. A test rig is established for testing the pressure field of the structure of hydrostatic thrust bearing after recess depth optimization, and experimental results show that experimental data are basically identical with the simulation results, which demonstrates the validity of the proposed numerical simulation method.

The results demonstrate that the oil film temperature decreases and the oil film pressure first increases and then decreases with an increase in the recess depth, but oil film velocity is constant. To sum up comprehensive lubrication performance, the recess depth of 3.5 mm is its optimal value for the annular recess hydrostatic thrust bearing.

The computed results indicate that to get an improved performance from a constant flow hydrostatic thrust bearing, a proper selection of the recess depth is essential.

The present paper proposes a theoretical analysis of the stability characteristics of a Jeffcott rotor‐hybrid bearing system. It is intended that on the basis of the numerical results drawn from this study, appropriate recess depth, land size, orifice location and speed parameter for stable operation can be determined for use in the bearing design process.

A Jeffcott rotor supported by hybrid oil film bearings with dual‐row recesses and orifice‐ compensated restrictors is studied. In order to facilitate the calculation of film dynamics, using the perturbation method, the Reynolds equation was linearized and subsequently solved using finite difference techniques, whilst the stability maps were determined by the Routh‐Hurwitz method.

The data reported here suggest that the stability characteristics of the Jeffcott rotor‐bearing system could be improved by the use of shallow, dual‐recessed hybrid bearings with orifice compensation. In addition to greater eccentricity ratios, smaller land‐width ratios and greater shaft stiffness may also provide shallow‐recessed bearings with better stability. In all cases, the stability provided by upstream orifice‐sited bearings is better than that provided by center orifice‐sited bearings, whilst high‐speed parameters may also provide a greater stability threshold.

This study proposes an extensive database as a critical requirement in the design of hybrid bearings, in order to ensure that a rotor bearing system is operating stably.

Many instances of maladaptive behaviors are due at least in part to a lack of social skills. Although there are effective interventions for teaching social skills, generalization of trained social skills remains a challenge. One promising way to enhance generalization may be to use functional behavior assessments to select social skills to teach that can meet individuals’ specific needs. This chapter describes a process for embedding function-based support into social skills interventions that may generalize to untrained settings. The chapter concludes with a case study demonstrating generalization of positive peer interaction from recess to a classroom setting for a grade two student. Results indicated that the student’s behavior during recess and during classroom instruction both changed upon implementation of the recess intervention, and these behaviors maintained over three months after the intervention was withdrawn.