Search results
1 – 10 of over 14000Jinliang Liu, Yanmin Jia, Guanhua Zhang and Jiawei Wang
The calculation of the crack width is necessary for the design of prestressed concrete (PC) members. The purpose of this paper is to develop a numerical model based on the…
Abstract
Purpose
The calculation of the crack width is necessary for the design of prestressed concrete (PC) members. The purpose of this paper is to develop a numerical model based on the bond-slip theory to calculate the crack width in PC beams.
Design/methodology/approach
Stress calculation method for common reinforcement after beam crack has occurred depends on the difference in the bonding performance between prestressed reinforcement and common reinforcement. A numerical calculation model for determining the crack width in PC beams is developed based on the bond-slip theory, and verified using experimental data. The calculation values obtained by the proposed numerical model and code formulas are compared, and the applicability of the numerical model is evaluated.
Findings
The theoretical analysis and experimental results verified that the crack width of PC members calculated based on the bond-slip theory in this study is reasonable. Furthermore, the stress calculation method for the common reinforcement is verified. Compared with the model calculation results obtained in this study, the results obtained from code formulas are more conservative.
Originality/value
The numerical calculation model for crack width proposed in this study can be used by engineers as a reference for calculating the crack width in PC beams to ensure the durability of the PC member.
Details
Keywords
Witold Mazgaj and Adam Warzecha
The purpose of this paper is to present the differences in results of numerical calculations arising from different simplifications of the rotational magnetization model in…
Abstract
Purpose
The purpose of this paper is to present the differences in results of numerical calculations arising from different simplifications of the rotational magnetization model in typical dynamo sheets.
Design/methodology/approach
A comprehensive model of rotational magnetization processes in typical dynamo sheets should take into consideration the magnetic hysteresis and eddy current phenomena and also certain anisotropic properties. The chosen model of the rotational magnetization is briefly presented in this paper. A method of the inclusion of the rotational magnetization model into equations of the magnetic field distribution is described. The correctness of these equations has been verified experimentally. Numerical calculations of the rotational magnetization in two types of dynamo sheets were carried out for several simplifications of the described model.
Findings
Results of numerical calculations of the rotational magnetization with the omission of the hysteresis phenomenon or with the omission of eddy currents were compared with results obtained with the use of the comprehensive model of the rotational magnetization.
Practical implications
The paper presents comments and recommendations concerning the omission of both the hysteresis phenomenon and eddy currents in the analysis of the rotational magnetization in dynamo sheets and the impact of these simplifications on numerical calculation results.
Originality/value
The content of the paper refers to very important issues of modeling and calculations of the rotational magnetization in typical dynamo steel sheets.
Details
Keywords
Jianhua Guo, Xiang Li, Sheng Yu and Hongfu Li
The purpose of this paper is to formulate and simulate the interaction between particles and fields for gyroklystron amplifier rapidly and effectively.
Abstract
Purpose
The purpose of this paper is to formulate and simulate the interaction between particles and fields for gyroklystron amplifier rapidly and effectively.
Design/methodology/approach
From Maxwell's equations, transient electromagnetic field equations and particle motion equations, as the subject of a self‐consistent field theory, are obtained by semi‐analytical and semi‐numerical method. A numerical calculation model on the interaction between particles and fields is proposed and illustrated in detail. Based on above‐mentioned field theory, calculation model and the Runge‐Kutta method, a program to simulate the interaction between particles and fields is designed and its software implementation is achieved using Fortran language. To testify the correctness of the calculation model, a millimeter wave gyroklystron amplifier is simulated by the program, and some numerical results are presented and analyzed. Meanwhile, a contrast among the simulated frequency characteristic, the FDTD‐PIC results and the experiments is made. The computing resources needed by the program are compared with that needed by the FDTD‐PIC method.
Findings
The calculation results show that the model and the program take less CPU time and fewer computing resources than FDTD‐PIC simulation. Moreover, simulated results are in accord with the FDTD‐PIC results and the experiments.
Originality/value
A calculation model on the interaction between particles and fields is proposed and achieved in this paper. A program is designed and proved to be a fast and effective calculation tool for solving the simulation of the interaction. In addition, a detailed speed spread model of particles is studied. The calculation model considering speed spread, the program and the simulated results constitute the main contribution of this paper.
Details
Keywords
A.M. Blokhin and A.A. Iohrdanidy
A mathematical gas dynamic model for semiconductor devices is numerically analysed. The well‐known ballistic diode problem is taken as an example.
Abstract
A mathematical gas dynamic model for semiconductor devices is numerically analysed. The well‐known ballistic diode problem is taken as an example.
Details
Keywords
Mohamed Nabil Houhou, Abderahim Belounar, Tamir Amari and Abdelaziz Brouthen
This paper aims to focus on three-dimensional (3D) numerical simulation of a monitored urban underground road consisting of diaphragm walls supported by one row of temporary steel…
Abstract
Purpose
This paper aims to focus on three-dimensional (3D) numerical simulation of a monitored urban underground road consisting of diaphragm walls supported by one row of temporary steel struts and a cover slab in the central area. In addition to the lateral wall displacements, the analysis focuses on the load development in the struts and the evolution of the total stresses at the soil–wall interface, and highlights the 3D effect on the behavior of the structure.
Design/methodology/approach
Computation by back-analysis has become an important contribution to the understanding of observed phenomena. In this context, this paper investigates a full 3D numerical back-analysis of diaphragm wall deformation using the finite difference code FLAC3D.
Findings
The instrumentation allows a deep understanding of the ground response and the soil-structure interaction phenomena. It also provides an opportunity to validate numerical models. Using a soil model with simple failure criteria, the wall displacements are strongly influenced by the soil deformation modulus. The strut stiffness considerably influences the wall behavior. The geometrical effects have a significant impact on the induced wall displacements.
Originality/value
In the present study, the main soil geotechnical characteristics were deduced from laboratory and in situ tests. However, Young’s modulus of the soil has been adjusted to take account of the unloading effect. In the same context, the non-linearity of the elastic characteristics of the steel struts has been taken into account by modeling the struts using their experimental stiffness instead of their theoretical rigidity.
Details
Keywords
In this paper, some issues about model formulation and solving methods for the Lorenz’s model are discussed, which also deals with fundamental characteristics of non‐linear…
Abstract
In this paper, some issues about model formulation and solving methods for the Lorenz’s model are discussed, which also deals with fundamental characteristics of non‐linear models. Mainly, there existed problems that Lorenz’s model was formulated based on the weak nonlinear, and spectral expansion which changed the fundamental properties of prototype of the N‐S equations. Furthermore, its solving methods, which are based on continuously smoothing schemes, not only distorted the fundamental characteristics of non‐linear models, but also led to misunderstanding of the concept of “schaos”, which has already caused confusion to people’s way of thinking. In essence, Lorenz’s chaos is an “error volute” which is trapped into “calculation of error values”. Whether it can be named “chaos” may need to be discussed with questions.
Details
Keywords
Włodzimierz Wróblewski, Krzysztof Bochon, Mirosław Majkut, Krzysztof Rusin and Emad Hasani Malekshah
The presence of air in the water flow over the hydrofoil is investigated. The examined hydrofoil is ClarkY 11.7% with an angle of attack of 8 deg. The flow simulations are…
Abstract
Purpose
The presence of air in the water flow over the hydrofoil is investigated. The examined hydrofoil is ClarkY 11.7% with an angle of attack of 8 deg. The flow simulations are performed with the assumption of different models. The Singhal cavitation model and the models which resolve the non-condensable gas including 2phases and 3phases are implemented in the numerical model. The calculations are performed with the uRANS model with assumption of the constant temperature of the mixture. The two-phase flow is simulated with a mixture model. The dynamics and structures of cavities are compared with literature data and experimental results.
Design/methodology/approach
The cavitation regime can be observed in some working conditions of turbomachines. The phase transition, which appears on the blades, is the source of high dynamic forces, noise and also can lead to the intensive erosion of the blade surfaces. The need to control this process and to prevent or reduce the undesirable effects can be fulfilled by the application of non-condensable gases to the liquid.
Findings
The results show that the Singhal cavitation model predicts the cavity structure and related characteristics differently with 2phases and 3phases models at low cavitation number where the cavitating flow is highly dynamic. On the other hand, the impact of dissolved air on the cloud structure and dynamic characteristic of cavitating flow is gently observable.
Originality/value
The originality of this paper is the evaluation of different numerical cavitation models for the prediction of dynamic characteristics of cavitating flow in the presence of air.
Details
Keywords
In the present study, a finite volume approach for solving two‐dimensional, two‐fluids flows with heat and mass transfer was developed for predicting the flow of particulate…
Abstract
In the present study, a finite volume approach for solving two‐dimensional, two‐fluids flows with heat and mass transfer was developed for predicting the flow of particulate materials through pneumatic dryer. The model was solved for a two‐dimensional steady‐state condition and considering axial and radial profiles for the flow variables. A two‐stage drying process was implemented. The numerical procedure includes discretization of calculation domain into torus‐shaped final volumes, solving the gas phase conservation equations by a modified semi‐implicit method for pressure‐linked equations algorithm, and the conservation equations of particulate phase were solved by the explicit forward difference algorithm. The mass momentum and energy coupling between the phases were considered by principles of the Interphase slip algorithm. In order to validate the theoretical and the numerical models, the developed models were applied to simulate the drying process of wet PVC particles in a large‐scale pneumatic dryer and to the drying process of wet sand in a laboratory‐scale pneumatic dryer. The predictions of the numerical simulations were compared successfully with the results of independent numerical and experimental investigations. Following the models validation, the two‐dimensional distributions of the flow characteristics were examined.
Details
Keywords
Deliang Liu, Shuhua Cao and Jiujun Xu
The purpose of this paper is to establish a rapid and effective numerical model of thin film lubrication with clear physical conception, in which viscosity variation along the…
Abstract
Purpose
The purpose of this paper is to establish a rapid and effective numerical model of thin film lubrication with clear physical conception, in which viscosity variation along the direction of film thickness was used instead of average viscosity, and continuous Reynolds equation was used in the calculation of thin film lubrication.
Design/methodology/approach
Based on rheology and thin film lubrication with point contact and considering features of shear thinning and like-solidification of lubricant oil in the thin film lubrication state, a modified formula with overall average equivalent viscosity was proposed by combining numerical calculation and experiment data.
Findings
It is a fast and efficient method for film lubrication state simulation.
Research limitations/implications
Thin film lubrication research on a nanoscale is very popular, and a variety of thin film lubrication models are proposed. Due to the complexity of thin film lubrication, it is still in the stage of revealing law and establishing calculation model.
Originality/value
The key issue is how to obtain the viscosity correction formula derived from engineering practice, also considered the lubricating oil class solidification and shear-thinning properties on thin film lubrication, while based on the system experiment, the viscosity modified formula for the gap, speed changes are proposed to obtain the overall average equivalent viscosity which makes the thin film lubrication micro to macro, so that a clear physical meaning for thin-film lubrication numerical calculation model is established.
Details
Keywords
Przemysław Smakulski, Sławomir Pietrowicz and Jun Ishimoto
This paper aims to describe and investigate the mathematical models and numerical modeling of how a cell membrane is affected by a transient ice freezing front combined with the…
Abstract
Purpose
This paper aims to describe and investigate the mathematical models and numerical modeling of how a cell membrane is affected by a transient ice freezing front combined with the influence of thermal fluctuations and anisotropy.
Design/methodology/approach
The study consists of mathematical modeling, validation with an analytical solution, and shows the influence of thermal noises on phase front dynamics and how it influences the freezing process of a single red blood cell. The numerical calculation has been modeled in the framework of the phase field method with a Cahn–Hilliard formulation of a free energy functional.
Findings
The results show an influence scale on directional phase front propagation dynamics and how significant are stochastic thermal noises in micro-scale freezing.
Originality/value
The numerical calculation has modeled in the framework of the phase field method with a Cahn–Hilliard formulation of a free energy functional.
Details