Search results

In a wireless sensor network (WSN), the sensor nodes are distributed in the network, and in general, they are linked through wireless intermediate to assemble physical data. The nodes drop their energy after a specific duration because they are battery-powered, which also reduces network lifetime. In addition, the routing process and cluster head (CH) selection process is the most significant one in WSN. Enhancing network lifetime through balancing path reliability is more challenging in WSN. This paper aims to devise a multihop routing technique with developed IIWEHO technique.

In this method, WSN nodes are simulated originally, and it is fed to the clustering process. Meanwhile, the CH is selected with low energy-based adaptive clustering model with hierarchy (LEACH) model. After CH selection, multipath routing is performed by developed improved invasive weed-based elephant herd optimization (IIWEHO) algorithm. In addition, the multipath routing is selected based on certain fitness functions like delay, energy, link quality and distance. However, the developed IIWEHO technique is the combination of IIWO method and EHO algorithm.

The performance of developed optimization method is estimated with different metrics, like distance, energy, delay and throughput and achieved improved performance for the proposed method.

This paper presents an effectual multihop routing method, named IIWEHO technique in WSN. The developed IIWEHO algorithm is newly devised by incorporating EHO and IIWO approaches. The fitness measures, which include intra- and inter-distance, delay, link quality, delay and consumption of energy, are considered in this model. The proposed model simulates the WSN nodes, and CH selection is done by the LEACH protocol. The suitable CH is chosen for transmitting data through base station from the source to destination. Here, the routing system is devised by a developed optimization technique. The selection of multipath routing is carried out using the developed IIWEHO technique. The developed optimization approach selects the multipath depending on various multi-objective functions.

Multipath routing holds a great potential to provide sufficient bandwidth to a plethora of applications in wireless sensor networks. In this paper, we consider the problem of interference that can significantly affect the expected performances. We focus on the performance evaluation of the iterative paths discovery approach as opposed to the traditional concurrent multipath routing. Five different variants of multipath protocols are simulated and evaluated using different performance metrics. We mainly show that the iterative approach allows better performances when used jointly with an interference-aware metric or when an interference-zone marking strategy is employed. This latter appears to exhibit the best performances in terms of success ratio, achieved throughput, control messages overhead as well as energy consumption.

This paper aims to propose a 3D-map aided tightly coupled positioning solution for land vehicles to reduce the errors caused by non-line-of-sight (NLOS) and multipath interference in urban canyons.

First, a simple but efficient 3D-map is created by adding the building height information to the existing 2D-map. Then, through a designed effective satellite selection method, the distinct NLOS pseudo-range measurements can be excluded. Further, an enhanced extended Kalman particle filter algorithm is proposed to fuse the information from dual-constellation Global Navigation Satellite Systems and reduced inertial sensor system. The dependable degree of each selected satellite is adjusted through fuzzy logic to further mitigate the effect of misjudged LOS and multipath.

The proposed solution can improve positioning accuracy in urban canyons. The experimental results evaluate the effectiveness of the proposed solution and indicate that the proposed solution outperforms all the compared counterparts.

The effect of NLOS and multipath is addressed from both the observation level and fusion level. To the authors’ knowledge, mitigating the effect of misjudged LOS and multipath in the fusion algorithm of tightly coupled integration is seldom considered in existing literature.

The purpose of this paper is to describe common methods for evaluating the performance of wireless devices such as wireless sensors in harsh radio environments.

The paper describes how measurements of real‐world propagation environments can be used to support the evaluation process, then presents representative measurement data from multipath environments where sensor networks are likely to be deployed: a fixed‐infrastructure, process‐control environment (here an oil refinery), and a heavy industrial environment (here an automotive assembly plant).

Results on the characterization of multipath in the propagation channel are summarized and how these results may be used in the performance evaluation of sensor networks is discussed.

The paper describes measurement results from environments where little open‐literature data exists on point‐to‐point propagation, specifically high‐multipath environments. These highly reflective scenarios can present difficulties for deployment of sensor networks.

With the rapid growth of wireless sensor networks (WSNs), they have become an integral and substantial part of people's life. As such WSN stands as an assuring outlook, but because of sensor's resource limitations and other prerequisites, optimal dual route discovery becomes an issue of concern. WSN along with central sink node is capable of handling wireless transmission, thus optimizing the network's lifetime by selecting the dual path. The major problem confronted in the application of security mechanisms in WSNs is resolving the issues amid reducing consumption of resources and increases security.

According to the proposed system, two metrics, namely, path length and packets delivery ratio are incorporated for identifying dual routes amid the source and destination. Thereafter by making use of the distance metric, the optimal dual route is chosen and data transmission is carried out amid the nodes. With the usage of the recommended routing protocol high packet delivery ratio is achieved with reduced routing overhead and low average end to end delay. It is clearly portrayed in the simulation output that the proposed on demand dual path routing protocol surpasses the prevailing routing protocol. Moreover, security is achieved make use of in accord the data compression reduces the size of the data. With the help of dual path, mathematical model of Finite Automata Theory is derived to transmit data from source to destination. Finite Automata Theory comprises Deterministic Finite Automata (DFA) that is being utilized for Dual Path Selection. In addition, data transition functions are defined for each input stage. In this proposed work, another mathematical model is 10; introduced to efficiently choose an alternate path between a receiver and transmitter for data transfer with qualified node as relay node using RR Algorithm. It also includes Dynamic Mathematical Model for Node Localization to improve the precision in location estimation using Node Localization Algorithm. As a result a simulator is built and various scenarios are elaborated for comparing the performance of the recommended dual path routing protocol with respect to the prevailing ones.

Reliability and fault-tolerance: The actual motive in utilizing the approach of multipath routing in sensor network was to offer path resilience in case of a node or link failures thus ascertaining reliable transmission of data. Usually in a fault tolerant domain, when the sensor node is unable to forward the data packets to the sink, alternative paths can be utilized for recovering its data packets during the failure of any link/node. Load balancing: Load balancing involves equalizing energy consumption of all the existing nodes, thereby degrading them together. Load balancing via clustering improves network scalability. The network's lifetime as well as reliability can be extended if varied energy level's nodes exist in sensor node. Quality of service (QoS): Improvement backing of quality of service with respect to the data delivery ratio, network throughput and end-to-end latency stands very significant in building multipath routing protocols for various network types. Reduced delay: There is a reduced delay in multipath routing since the backup routes are determined at the time of route discovery. Bandwidth aggregation: By dividing the data toward the same destination into multiple streams (by routing all to a separate path) can aggregate the effective bandwidth. The benefit being that, in case a node possesses many links with low bandwidth, it can acquire a bandwidth which is more compared to the individual link.

Few more new algorithms can be used to compare the QoS parameters.

Proposed mechanism with feedback ascertains improvised delivery ratio compared to the single path protocol since in case of link failure, the protocol has alternative route. In case there are 50 nodes in the network, the detection mechanism yields packet delivery of 95% and in case there are 100 nodes, the packet delivery is lowered to 89%. It is observed that the packet rate in the network is more for small node range. When the node count is 200, the packet ratio is low, which is lowered to 85%. With a node count of 400, the curve depicts the value of 87%. Hence, even with a decrease in value, it is superior than the existing protocols. The average end-to-end delay represents the transmission delay of the data packets that have been successfully delivered as depicted in Figure 6 and Table 3. The recommended system presents the queue as well as the propagation delay from the source to destination. The figure depicts that when compared to the single path protocol, the end-to-end delay can be reduced via route switching. End-to-end delay signifies the time acquired for the delay in the receival of the the retransmitted packet by each node. The comparison reveals that the delay was lower compared to the existing ones in the WSN. Proposed protocol aids in reducing consumption of energy in transmitter, receiver and various sensors. Comparative analysis of energy consumptions of the sensor in regard to the recommended system must exhibit reduced energy than the prevailing systems.

On demand dual path routing protocol. Hence it is verified that the on demand routing protocol comprises DFA algorithms determines dual path. Here mathematical model for routing between two nodes with relay node is derived using RR algorithm to determine alternate path and thus reduce energy consumption. Another dynamic mathematical model for node localization is derived using localization algorithm. For transmitting data with a secure and promising QoS in the WSNs, the routing optimization technique has been introduced. The simulation software environment follows the DFA. The simulation yields in improvised performance with respect to packet delivery ratio, throughput, average end-to-end delay and routing overhead. So, it is proved that the DFA possesses the capability of optimizing the routing algorithms which facilitates the multimedia applications over WSNs.

The purpose of this paper is to propose, a new multi-path routing protocol that distributes packets over the available paths between a sender and a receiver in a multi-hop ad hoc network. We call this protocol Geometric Sequence Based Multipath Routing Protocol (GMRP).

GMRP distributes packets according to the geometric sequence. GMRP is evaluated using GloMoSim simulator. The authors use packet delivery ratio and end-to-end delay as the comparison performance metrics. They also vary many network configuration parameters such as number of nodes, transmission rate, mobility speed and network area.

The simulation results show that GMRP reduces the average end-to-end delay by up to 49 per cent and increases the delivery ratio by up to 8 per cent.

This study is the first to propose to use of geometric sequence in the multipath routing approach.

The purpose of this work is to obtain an overbounded broadcast sigma from actual (non-Gaussian) correction error distribution under the stringent navigation integrity requirements for aircraft precision approach and landing.

Approach is statistically to overbound satellite pseudorange correction error distribution with the use of numerical solution of Fisher-Z transformation. Inflation factors for overbounding broadcast sigma are extracted from Fisher-Z transformation based on measured correlation and counted independent identically distributed (iid) sample sizes of true empirical data.

New overbounded broadcast sigma values for eight long-pass satellites were obtained based on measured actual empirical data and ensured integrity risk at 10⁻⁸ probability level. Proposed methodology successfully overbounds ground reflection multipath-type systematic and temporal errors sources.

This paper introduced a new method of accounting for ground reflection multipath for local area augmentation system/ground-based augmentation system navigation integrity. The method is also applicable to statistically overbound any other serially correlated temporal variation in measured data if both correlation values and finite iid sample sizes are known.

The purpose of this study is to develop a high-quality factor fractal inductor for wireless applications such as satellite, WLAN, Bluetooth, microwave, radar and cellular phone.

The Hilbert fractal curve is used in the implementation of the proposed inductor. In the proposed inductor, the metal width has split into multiple paths based on the skin depth of the metal. The simulations of the proposed inductor are performed in 180 nm CMOS technology using the Advanced Design System EM simulator.

The multipath technique reduces the skin effects and proximity effects, which, in turn, decreases the series resistance of the inductor and attains high-quality factor over conventional fractal inductor for the equal on-chip area.

The width of the path has chosen higher than the skin depth of the metal for a required operating frequency. Due to cost constraints, the manufacturing of the proposed fractal inductor is limited to a single layer.

The proposed inductor will be useful for the implementation of critical building blocks of radio frequency integrated circuits and monolithic microwave integrated circuits such as low-noise amplifiers, voltage-controlled oscillators, mixers, filters and power amplifiers.

This paper presents for the first time the use of a multipath technique for the fractal inductors to enhance the quality factor.

The purpose of this paper is to review the existing routing algorithms for wireless ad hoc networks to evaluate the methods according to the current requirements. Wireless ad hoc network can provide communication in emergency situations. Active nodes in ad hoc network work as sender, receiver and router at the same time. Nodes are equipped with limited bandwidth and energy. Optimal routing method can help in “smart use” of available resources. Evolvement of routing method based on need is a continuous process. Numerous applications of ad hoc network motivates researcher for further development to fulfill the need of society.

In this paper, routing algorithms for ad hoc network based on ant colony optimization, multipath routing and with multiple input multiple output (MIMO) antenna support have been discussed.

Comparative analysis has been drawn among existing algorithms of different categories. Transmitting message packets parallel through multiple paths in the network can save overall resource usage in the network.

The authors have discussed the future area of development for optimal routing in ad hoc networks. Considering signal noise ratio and congestion status while selecting path can provide better energy use in the network. Rather than leaving less prioritized route paths, multiple paths can be used for sending data packets parallel.

The asymmetry of the velocity profile caused by geometric deformation, complex turbulent motion and other factors must be considered to effectively use the flowmeter on any section. This study aims to better capture the flow field information and establish a model to predict the profile velocity, we take the classical double elbow as the research object and propose to divide the flow field into three categories with certain common characteristics.

The deep learning method is used to establish the model of multipath linear velocity fitting profile average velocity. A total of 480 groups of data are taken for training and validation, with ten integer velocity flow fields from 1 m/s to 10 m/s. Finally, accuracy research with relative error as standard is carried out.

The numerical experiment yielded the following promising results: the maximum relative error is approximately 1%, and in the majority of cases, the relative error is significantly lower than 1%. These results demonstrate that it surpasses the classical optimization algorithm Equal Tab (5%) and the traditional artificial neural network (3%) in the same scenario. In contrast with the previous research on a fixed profile, we focus on all the velocity profiles of a certain length for the first time, which can expand the application scope of a multipath ultrasonic flowmeter and promote the research on flow measurement in any section.

This work proposes to divide the flow field of double elbow into three categories with certain common characteristics to better capture the flow field information and establish a model to predict the profile velocity.