Search results

This paper aims to develop a slice-based representation of geometry and material information of a multi-material object to be produced by additive manufacturing. Representation of complex heterogeneous material allowing for the additive manufacturing-based build of a wide range of objects that are limited only by the constraints of the manufacturing process.

Initial 3D CAD models are created with multiple and functionally graded materials using an assembly model to create a single part with well-defined material regions. These models are then sliced to create the geometry and material boundaries required for each layer to enable layer-by-layer fabrication.

A representation schema is proposed to add multi-material attributes to a sliced file for additive manufacturing using the combination of material index and material geometry region. A modified common layer interface data format is proposed to allow for representation of a wide range of homogeneous and heterogeneous material for each slice. This format allows for a generic input for tool paths to be generated for each material of the layer.

The proposed approach allows for slice data representation for any material combination that can be defined mathematically. Three different material types, namely, composite material, functionally graded materials and combination thereof, are provided as examples. These data form the input data for subsequent tool path planning.

Understanding the effect of process parameters on interfaces and interfacial bonding between two materials during multi-material additive manufacturing (MMAM) is crucial to the fabrication of high-quality and strong multi-material structures. The purpose of this paper is to conduct an experimental and statistical study to investigate the effect of process parameters of soft and hard materials on the flexural behavior of multi-material structures fabricated via material extrusion-based MMAM.

Sandwich beam samples composed of a soft core and hard shells are fabricated via MMAM under different printing conditions. A design of experiments is conducted to investigate the effect of the print speed and nozzle temperature on the flexural behavior of soft-hard sandwich beams. Analysis of variance and logistic regression analysis are used to analyze the significance of each process parameter. The interfacial morphology of the samples after the flexural tests is characterized. Thermal distributions during the MMAM process are captured to understand the effect of process parameters on the flexural behavior based on inter-bonding formation mechanisms.

Experimental results show that the soft-hard sandwich beams exhibited two different failure modes, including shell failure and interfacial failure. A transition of failure modes from interfacial failure to shell failure is observed as the nozzle temperatures increase. The samples that fail because of interfacial cracking exhibit a pure adhesive failure because of weak interfacial fracture properties. The samples that fail because of shell cracking exhibit a mixed adhesive and cohesive failure. The flexural strength and modulus are affected by the nozzle temperature for the hard material and the print speeds for both hard and soft materials significantly.

This paper first investigates the effect of process parameters for soft and hard materials on the flexural behavior of additively manufactured multi-material structures. Especially, the ranges of the selected process parameters are distinct, and the effect of all possible combinations of the process parameters on the flexural behavior is characterized through a full factorial design of experiments. The experimental results and conclusions of this paper provide guidance for future research on improving the interfacial bonding and understanding the failure mechanism of multi-material structures fabricated by MMAM.

The purpose of this study is to develop a novel approach to designing locally programmed multi-material distribution in a three-dimensional (3D) model, with the goal of producing a biomimetic robot that could mimic the locomotion of living organisms.

A voxelized representation is used to design the multi-material digital model and the material distribution in the model is optimized with the aims of mimicking the deflection dynamics of a real-life biological structure (i.e. inchworms) during its locomotion and achieving smooth deflection between adjacent regions. The design is validated post-fabrication by comparing the bending profiles of the printed robot with the deflection reference images of the real-life organism.

The proposed design framework in this study provides a foundation for multi-material multi-functional design for biomimicry and a wide range of applications in the manufacturing field and many other fields such as robotics and biomedical fields. The final optimized material design was 3D printed using a novel multi-material additive manufacturing method, magnetic field-assisted projection stereolithography. From the experimental tests, it was observed that the deflection curve and the deflection gradient of the printed robot within the adjacent regions of the body agreed well with the profiles taken from the real-life inchworm.

This paper presents a voxelized digital representation of the material distribution in printed parts, allowing spatially varied programming of material properties. The incorporation of reference images from living organisms into the design approach is a novel approach to transform image domain knowledge into the domain of engineering mechanical and material properties. Furthermore, the novel multi-material distribution design approach was validated through designing, 3D printing and prototyping an inchworm-inspired soft robot, which showed superior locomotion capability by mimicking the observed locomotion of the real inchworm.

This study presents a method for fabricating multi-material objects using a hybrid additive and subtractive approach. By hybridizing the material composition in addition to the fabrication process, functional requirements can be met more effectively than through homogenous material parts produced using a single manufacturing process. Development of multi-material objects consisting of dissimilar materials that have been hampered by a lack of a structural interface compatible with in-envelope hybrid additive and subtractive manufacturing.

This research presents a novel method for producing multi-material components through in-envelope hybrid additive and subtractive manufacturing. This study attempts to address the absence of a metal-polymer interface by integrating polymer additive manufacturing into a five-axis mill. The ability of the polymer additive system to reproduce overhang geometries is assessed with different levels of cooling. The relationship between structural performance, cooling and material flow rate is evaluated for the deposited carbon fiber reinforced acrylonitrile butadiene styrene.

A mechanically interlocking root structure is developed to form an interface between a machined aluminum region and a polymer region of an object. The tensile strength of the metal-polymer object is measured and found to be on the same order of magnitude as the bulk three-dimensional printed polymer.

By targeting the material properties to the local functional requirements within a part and taking advantage of both additive and subtractive manufacturing processes, this study will enable broader design options and optimization of performance metrics.

The purpose of this study is to explore the synthesis of novel conductive photo-resins to produce flexible conducting composites for use in additive manufacturing. By using direct ink writing (DIW) additive manufacturing, this study aims to explore the fabrication of multimaterial devices with conductive and insulating components. Using digital light processing (DLP) additive manufacturing, this study aims to fabricate detailed objects with higher resolution than material extrusion 3D printing systems.

In this paper, several photocurable conducting resins were prepared for DIW and DLP additive manufacturing. These resins were then cured using 405 nm near UV light to create intrinsically conductive polymer (ICP) composites. The electrochemical properties of these composites were analysed, and the effect of co-monomer choice and crosslinking density was determined. These results determined a suitable resin for subsequent additive manufacture using DIW and DLP. These 3D printing techniques were used to develop flexible conducting devices of submillimetre resolution that were fabricated with unmodified, commercially available 3D printers.

Cyclic voltammetry and volume conductivity analysis of the conducting resins determined the most conductive resin formula for 3D printing. Conductive devices were fabricated using the two 3D printing techniques. A multimaterial soft conducting device was fabricated using DIW, and each conducting component was insulated from its neighbours. DLP was used to fabricate a soft conducting device with good XY resolution with a minimum feature size of 0.2 mm. All devices were prepared in unmodified commercially available 3D printers.

These findings have value in the development of soft robotics, artificial muscles and wearable sensors. In addition, this work highlights techniques for DIW and DLP additive manufacturing.

Several original conducting resin formulae were developed for use in two 3D printing systems. The resulting 3D-printed composites are soft and flexible while maintaining their conductive properties. These findings are of value to both polymer chemists and to the field of additive manufacturing.

This study highlights the demand for low-cost and high accuracy products through the design and development of new 3D printing technologies. Besides, significant progress has been made in this field. A comparative study helps to understand the latest development in materials and future prospect of this technology.

Nevertheless, a large amount of progress still remains to be made. While some of the works have focused on the performances of the materials, the rest have focused on the development of new methods and techniques in additive manufacturing.

This paper critically evaluates the current 3D printing technologies, including the development and optimizations made to the printing methods, as well as the printed objects. Meanwhile, previous developments in this area and contributions to the modern trend in manufacturing technology are summarized briefly.

The paper can be summarized in three sections. Firstly, the existing printing methods along with the frequently used printing materials, as well as the processing parameters, and the factors which influence the quality and mechanical performances of the printed objects are discussed. Secondly, the optimization techniques, such as topology, shape, structure and mechanical property, are described. Thirdly, the latest development and applications of additive manufacturing are depicted, and the scope of future research in the relevant area is put forward.

The purpose of this study is focused on the mechanical properties of multi-materials porous structures manufactured by selective laser melting (SLM).

The Diamond structure was designed by the triply periodic minimal surface function in MATLAB, and multi-materials porous structures were manufactured by SLM. Compression tests were applied to analyze the anisotropy of mechanical properties of multi-materials porous structures.

Compression results show that the multi-materials porous structure has a strong anisotropy behavior. When the compression force direction is parallel to the material arrangement, multi-materials porous structure was compressed in a layer-by-layer way, which is the traditional deformation of the gradient structure. However, when the compression force direction is perpendicular to the material arrangement, the compression curves show a near-periodic saw-tooth waveform characteristic, and this kind of structure was compressed consistently. It is demonstrated that the combination with high strength brittle material and low strength plastic material improves compression mode, and plastic material plays a role in buffering fracture.

This research provides a new method for the design and manufacturing of multi-materials porous structures and an approach to change the compression behavior of the porous structure.

The present work aims in presenting the energy absorbing capability of different combination stacking of multiple materials, namely, Vero White and Tango Plus, under static and dynamic loading conditions.

Honeycomb structures with various multi-material stackings are fabricated using PolyJet 3D printing technique. From the static and dynamic test results, the structure having the better energy absorbing capability is identified.

It is found that from the various stacking combinations of multiple materials, the five-layered (5L) sandwich multi-material honeycomb structure has better energy absorbing capability.

This multi-material combination with a honeycomb structure can be used in the application of crash resistance components such as helmet, knee guard, car bumper, etc.

Through experimental work, various multi-material honeycomb structures and impact resistance of single material clearly indicated the inability to absorb impact loads which experiences a maximum force of 5,055.24 N, whereas the 5L sandwich multi-material honeycomb structure experiences a minimum force of 1,948.17 N, which is 38.5 per cent of the force experienced by the single material. Moreover, in the case of compressive resistance, 2L sandwich multi-material honeycomb structure experiences a maximum force of 5,887.5 N, whereas 5L sandwich multi-material honeycomb structure experiences a minimum force of 2,410 N, which is 40.9 per cent of the force experienced by two-layered (2L) sandwich multi-material honeycomb structure. In this study, the multi-material absorbed most of the input energy and experienced minimum force in both compressive and impact loads, thus showing its energy absorbing capability and hence its utility for structures that experience impact and compressive loads. A maximum force is required to deform the single and 2L material in terms of impact and compressive load, respectively, under maximum stiffness conditions.

Material jetting approximates composite material properties through deposition of base materials in a dithered pattern. This microscale, voxel-based patterning leads to macroscale property changes, which must be understood to appropriately design for this additive manufacturing (AM) process. This paper aims to identify impacts on these composites’ viscoelastic properties due to changes in base material composition and distribution caused by incomplete dithering in small features.

Dynamic mechanical analysis (DMA) is used to measure viscoelastic properties of two base PolyJet materials and seven “digital materials”. This establishes the material design space enabled by voxel-by-voxel control. Specimens of decreasing width are tested to explore effects of feature width on dithering’s ability to approximate macroscale material properties; observed changes are correlated to multi-material distribution via an analysis of ingoing layers.

DMA shows storage and loss moduli of preset composites trending toward the iso-strain boundary as composition changes. An added iso-stress boundary defines the property space achievable with voxel-by-voxel control. Digital materials exhibit statistically significant changes in material properties when specimen width is under 2 mm. A quantified change in same-material droplet groupings in each composite’s voxel pattern shows that dithering requires a certain geometric size to accurately approximate macroscale properties.

This paper offers the first quantification of viscoelastic properties for digital materials with respect to material composition and identification of the composite design space enabled through voxel-by-voxel control. Additionally, it identifies a significant shift in material properties with respect to feature width due to dithering pattern changes. This establishes critical design for AM guidelines for engineers designing with digital materials.

This paper aims to present a multi-material additive manufacturing (AM) process with a newly developed curing-on-demand method to fabricate a three-dimensional (3D) object with multiple material compositions.

Unlike the deposition-on-demand printing method, the proposed curing-on-demand printheads use a digital light processing (DLP) projector to selectively cure a thin layer of liquid photocurable resin and then clean the residual uncured material effectively using a vacuuming and post-curing device. Each printhead can individually fabricate one type of material using digitally controlled mask image patterns. The proposed AM process can accurately deposit multiple materials in each layer by combining multiple curing-on-demand printheads together. Consequently, a three-dimensional object can be fabricated layer-by-layer using the developed curing-on-demand printing method.

Effective cleaning of uncured resin is realized with reduced coated resin whose height is in the sub-millimeter level and improved vacuum cleaning performance with the uncleaned resin less than 10 µm thick. Also, fast material swapping is achieved using the compact design of multiple printheads.

The proposed multi-material stereolithography (SL) process enables 3D printing components using more viscous materials and can achieve desired manufacturing characteristics, including high feature resolution, fast fabrication speed and low machine cost.