Search results

The purpose of this paper is to fabricate and characterize osteochondral beta‐tricalcium phosphate/collagen scaffold with bio‐inspired design by ceramic stereolithography (CSL) and gel casting.

Histological analysis was applied to explore the morphological characteristics of the transitional structure between the bone and the cartilage. The acquired data were used to design biomimetic biphasic scaffolds, which include the bone phase, cartilage phase, and their transitional structure. The engineered scaffolds were fabricated from β‐TCP‐collagen by CSL and gel casting. The cartilage phase was added to the ceramic phase by gel‐casting and freeze drying.

The resulting ceramic scaffolds were composed of a bone phase with the following properties: 700‐900 μm pore size, 200‐500 μm interconnected pores size, 50‐65 percent porosity, fully interconnected, ∼12 Mpa compressive strength. A suitable binding force between cartilage phase and ceramic phase was achieved by physical locking that was created by the biomimetic transitional structure. Cellular evaluation showed satisfactory results.

This study is the first try to apply CSL to fabricate biological implants with β‐TCP and type‐I collagen. There are still some defects in the composition of the slurry and the fabrication process.

This strategy of osteochondral scaffold fabrication can be implemented to construct an osteochondral complex that is similar to native tissue.

The CSL technique is highly accurate, as well as biologically secure, when fabricating ceramic tissue engineering scaffolds and may be a promising method to construct hard tissue with delicate structures. The present strategy enhances the versatility of scaffold fabrication by RP.

The purpose of this study is to develop a novel approach to designing locally programmed multi-material distribution in a three-dimensional (3D) model, with the goal of producing a biomimetic robot that could mimic the locomotion of living organisms.

A voxelized representation is used to design the multi-material digital model and the material distribution in the model is optimized with the aims of mimicking the deflection dynamics of a real-life biological structure (i.e. inchworms) during its locomotion and achieving smooth deflection between adjacent regions. The design is validated post-fabrication by comparing the bending profiles of the printed robot with the deflection reference images of the real-life organism.

The proposed design framework in this study provides a foundation for multi-material multi-functional design for biomimicry and a wide range of applications in the manufacturing field and many other fields such as robotics and biomedical fields. The final optimized material design was 3D printed using a novel multi-material additive manufacturing method, magnetic field-assisted projection stereolithography. From the experimental tests, it was observed that the deflection curve and the deflection gradient of the printed robot within the adjacent regions of the body agreed well with the profiles taken from the real-life inchworm.

This paper presents a voxelized digital representation of the material distribution in printed parts, allowing spatially varied programming of material properties. The incorporation of reference images from living organisms into the design approach is a novel approach to transform image domain knowledge into the domain of engineering mechanical and material properties. Furthermore, the novel multi-material distribution design approach was validated through designing, 3D printing and prototyping an inchworm-inspired soft robot, which showed superior locomotion capability by mimicking the observed locomotion of the real inchworm.

The purpose of this paper is to review cases of artificial reefs built through additive manufacturing (AM) technologies and analyse their ecological goals, fabrication process, materials, structural design features and implementation location to determine predominant parameters, environmental impacts, advantages, and limitations.

The review analysed 16 cases of artificial reefs from both temperate and tropical regions. These were categorised based on the AM process used, the mortar material used (crucial for biological applications), the structural design features and the location of implementation. These parameters are assessed to determine how effectively the designs meet the stipulated ecological goals, how AM technologies demonstrate their potential in comparison to conventional methods and the preference locations of these implementations.

The overview revealed that the dominant artificial reef implementation occurs in the Mediterranean and Atlantic Seas, both accounting for 24%. The remaining cases were in the Australian Sea (20%), the South Asia Sea (12%), the Persian Gulf and the Pacific Ocean, both with 8%, and the Indian Sea with 4% of all the cases studied. It was concluded that fused filament fabrication, binder jetting and material extrusion represent the main AM processes used to build artificial reefs. Cementitious materials, ceramics, polymers and geopolymer formulations were used, incorporating aggregates from mineral residues, biological wastes and pozzolan materials, to reduce environmental impacts, promote the circular economy and be more beneficial for marine ecosystems. The evaluation ranking assessed how well their design and materials align with their ecological goals, demonstrating that five cases were ranked with high effectiveness, ten projects with moderate effectiveness and one case with low effectiveness.

AM represents an innovative method for marine restoration and management. It offers a rapid prototyping technique for design validation and enables the creation of highly complex shapes for habitat diversification while incorporating a diverse range of materials to benefit environmental and marine species’ habitats.

The purpose of this paper is to provide a review of recent progress into the development of biomimetic adhesives, particularly those that mimic the attachment mechanism of the gecko lizard's foot.

This paper first discusses the discovery of the gecko's adhesion mechanism. It then describes key “gecko glue” developments and summarises the properties of experimental adhesives that exploit this effect. It concludes with a consideration of anticipated applications.

This paper shows that, following the discovery of the gecko's adhesion mechanism in 2002, which is based on van der Waals forces, biomimetic adhesives have become the topic of a major research effort. These developments are poised to yield families of novel adhesive materials with superior properties which are likely to find uses in industries ranging from defence and nanotechnology to healthcare and sport.

The paper provides a unique insight into the latest developments in biomimetic adhesive technology.

The purpose of this paper is to design a biomimetic surface structure for use in a glass transport device to enhance the suspension lift of a glass transport unit.

This paper presents a surface structure of a suspended glass transport device based on the principle of bionics. First, a mapping model is constructed based on the wing structure. Second, the optimal structural parameters are given according to genetic algorithm optimization. Finally, the experimental comparison of the test bench verified the feasibility of the theory.

Through experimental comparison, the biomimetic suspension glass transport device saves 20% of air pressure compared with the ordinary suspended glass transport device, which verifies the effectiveness of the theoretical method.

This paper proposes a suspended glass transport device based on the principle of bionics, which saves the air pressure required for work. It is expected to be used in suspension glass transport devices.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-09-2019-0389/

This paper aims to investigate whether the trabecular architecture found in natural bone can be effectively replicated through the selective laser sintering process of Nylon P2200.

Trabecular bone was idealised into a scaled up hexagonal cell proven to replicate the natural structure. The structure was modelled in Solidworks 2013 to form a network of interlinking cells. The specific property analysed was the structure toughness through the measurement of the energy absorbed before sample fracture.

It was found that the impact absorption can be increased with the integration of a greater number of trabecular cells producing a finer resolution and not necessarily by increasing the trabecular size. The information gained from this research may be useful in the design of impact and shock absorbing components, with an emphasis on efficient use of material mass.

Designers and engineers may find biomimetic methods of absorbing shock and impact an efficient alternative consideration in design applications.

The trabecular architecture should be designed so as to be weaker than the bounding surfaces, ensuring that the individual trabecular experience failure first, maximising their energy absorbing capability through increasing the period of deceleration. The simplest way of doing this is to ensure the rod thickness is less than the bounding material thickness.

This work documents original testing of both the RP material and consolidated design of samples of idealised bone structures. It builds on previous work in the area and through the results of empirical testing, derives recommendations for further considerations in this area of design and manufacture of biomimetic structures.

The purpose of this paper is to describe recent research involving the application of biomimetic design concepts to nanosensor developments.

Following a short introduction to nanobiomimetic concepts, this paper discusses a range of recent nanosensor developments whose designs mimic or use naturally‐occurring nanostructures or nanomaterials.

This shows that biomimetic design concepts are being applied to a range of nanosensors which have been shown to respond to a range of physical and chemical variables, often with very high sensitivities. Potential applications include homeland security and military uses, healthcare and robotics.

This paper provides details of recent nanobiomimetic sensor research which has potential in a range of critical applications.

Human-induced marine environmental noise, such as commercial shipping and seismic exploration, is concentrated in the low-frequency range. Meanwhile, low-frequency sound signals can achieve long-distance propagation in water. To meet the requirements of long-distance underwater detection and communication, this paper aims to propose an micro-electro-mechanical system (MEMS) flexible conformal hydrophone for low-frequency underwater acoustic signals. The substrate of the proposed hydrophone is polyimide, with silicon as the piezoresistive unit.

This paper proposes a MEMS heterojunction integration process for preparing flexible conformal hydrophones. In addition, sensors prepared based on this process are non-contact flexible sensors that can detect weak signals or small deformations.

The experimental results indicate that making devices with this process cannot only achieve heterogeneous integration of silicon film, metal wire and polyimide, but also allow for customized positions of the silicon film as needed. The success rate of silicon film transfer printing is over 95%. When a stress of 1 Pa is applied on the x-axis or y-axis, the maximum stress on Si as a pie-zoresistive material is above, and the average stress on the Si film is around.

The flexible conformal vector hydrophone prepared by heterogeneous integration technology provides ideas for underwater acoustic communication and signal acquisition of biomimetic flexible robotic fish.

The aim of this research is to develop, demonstrate and characterize techniques for fabricating such scaffolds by combining solid freeform fabrication and computational design methods. When fully developed, such techniques are expected to enable the fabrication of tissue engineering scaffolds endowed with functionally graded material composition and porosity exhibiting sharp or smooth gradients. Results of bio‐compatibility and in vivo implantation are presented.

The purpose of this paper is to design and fabricate a three-dimensional (3D) bionic airflow sensing array made of two multi-electrode piezoelectric metal-core fibers (MPMFs), inspired by the structure of a cricket’s highly sensitive airflow receptor (consisting of two cerci).

A metal core was positioned at the center of an MPMF and surrounded by a hollow piezoceramic cylinder. Four thin metal films were spray-coated symmetrically on the surface of the fiber that could be used as two pairs of sensor electrodes.

In 3D space, four output signals of the two MPMFs arrays can form three “8”-shaped spheres. Similarly, the sensing signals for the same airflow are located on a spherical surface.

Two MPMF arrays are sufficient to detect the speed and direction of airflow in all three dimensions.