Search results

Interaction plays a significant role in robotics and it is considered in all levels of hardware and software control design. Several models have been introduced and developed for controlling robotic interaction. This study aims to address and analyze the state-of-the-art on robotic interaction control by which it is revealed that both practical and theoretical issues have to be faced when designing a controller.

In this review, a critical analysis of the control algorithms developed for robotic interaction tasks is presented. A hierarchical classification of distributed control levels from general aspects to specific control algorithms is also illustrated. Hence, two main control paradigms are discussed together with control approaches and architectures. The challenges of each control approach are discussed and the relevant solutions are presented.

This review presents an evolvement trend of interaction control theories and technologies over time. In addition, it highlights the pros and cons of each control approaches with addressing how the flaws of one control approach were compensated by emerging another control methods.

This review provides the robotic controller designers to select the right architecture and accordingly design the appropriate control algorithm for any given interactive task and with respect to the technology implemented in robotic manipulator.

This paper aims to present a fully actuated aerial manipulator (AM) with a robust motion/force hybrid controller for conducting contact-typed inspection tasks in industrial plants.

An AM is designed based on a hexarotor with tilted rotors and a rigidly attached end effector. By tilting the rotors, the position and attitude of the AM can be controlled independently, and the AM can actively exert forces on industrial facilities through the rigidly attached end effector. A motion/force hybrid controller is proposed to perform contact-typed inspection tasks. The contact-typed inspection task is divided into the approach phase and the contact phase. In the approach phase, the AM automatically approaches the contact surface. In the contact phase, a motion/force hybrid controller is used for contact-typed inspection. Finally, a disturbance observer (DOB) is used to estimate external disturbances and used as feedforward compensation.

The proposed AM can slowly approach the contact surface without significant impact in the contact phase. It can realize constant force control in the direction normal to the contact surface in the contact phase, whereas the motion of the remaining directions can be controlled by the operator. The use of the DOB ensures the robustness of the AM in the presence of external wind disturbances.

A fully actuated AM system with a robust motion/force hybrid controller is proposed. The effectiveness of the proposed AM system for conducting contact-typed industrial inspection tasks is validated by practical experiments.

Many people suffer from injuries related to their hand. This research aims to focus on the improvement of the previously developed smart glove by using position and force control algorithms. The new smart glove may be used for both physiotherapy and assistance.

The proposed robot uses shape memory alloy (SMA) actuators coupled to an under-actuated tendon-driven mechanism. The proposed device, which is presented as a wearable glove attached to an actuation module, is capable of exerting extremely high forces to grasp objects in various hand configurations. The device’s performance is studied in physiotherapy and object manipulation tasks. In the physiotherapy mode, hand motion frequency is controlled, whereas the grasping force is controlled in the object manipulation mode. To simulate the proposed system behavior, the kinematic and dynamic equations of the proposed system have been derived.

The achieved results verify that the system is suitable to be used as part of a rehabilitation device in which it can flex and extend fingers with accurate trajectories and grasp objects efficiently. Specifically, it will be shown that using six SMA wires with the diameter of 0.25 mm, the proposed robot can provide 45 N gripping force for the patients.

The proposed robot uses SMA actuators and an under-actuated tendon-driven mechanism. The resulted robotic system, which is presented as a wearable glove attached to an actuation module, is capable of exerting extremely high force levels to grasp objects in various hand configurations. It is shown that the motion and exerted force of the robot may be controlled effectively in practice.

The application of robots to industrial problems often requires grasping and manipulation of the work piece. The robot is able to perform a task adequately only when it is assigned proper tooling and adequate methods of grasping and handling work pieces. The design of such a task requires an in‐depth knowledge of several interrelated subjects including: gripper design, force, position, stiffness and compliance control and grasp configurations. In this paper, we review the research finding on these subjects in order to present in a concise manner, which can be easily accessed by the designers of robot task, the information reported by the researchers, and identify based on the review, future research directions in these areas.

Presents an approach to improved performance and flexibility in industrial robotics by means of sensor integration and feedback control in task‐level programming and task execution. Also presents feasibility studies in support of the ideas. Discusses some solutions to the problem using six degrees of freedom force control together with the ABB S4CPlus system as an illustrative example. Consider various problems in the design of an open sensor interface for industrial robotics and discusses possible solutions. Finally, presents experimental results from industrial force controlled grinding.

The purpose of this review paper is to address the substantial challenges of the outdated exoskeletons used for rehabilitation and further study the current advancements in this field. The shortcomings and technological developments in sensing the input signals to enable the desired motions, actuation, control and training methods are explained for further improvements in exoskeleton research.

Search platforms such as Web of Science, IEEE, Scopus and PubMed were used to collect the literature. The total number of recent articles referred to in this review paper with relevant keywords is filtered to 143.

Exoskeletons are getting smarter often with the integration of various modern tools to enhance the effectiveness of rehabilitation. The recent applications of bio signal sensing for rehabilitation to perform user-desired actions promote the development of independent exoskeleton systems. The modern concepts of artificial intelligence and machine learning enable the implementation of brain–computer interfacing (BCI) and hybrid BCIs in exoskeletons. Likewise, novel actuation techniques are necessary to overcome the significant challenges seen in conventional exoskeletons, such as the high-power requirements, poor back drivability, bulkiness and low energy efficiency. Implementation of suitable controller algorithms facilitates the instantaneous correction of actuation signals for all joints to obtain the desired motion. Furthermore, applying the traditional rehabilitation training methods is monotonous and exhausting for the user and the trainer. The incorporation of games, virtual reality (VR) and augmented reality (AR) technologies in exoskeletons has made rehabilitation training far more effective in recent times. The combination of electroencephalogram and electromyography-based hybrid BCI is desirable for signal sensing and controlling the exoskeletons based on user intentions. The challenges faced with actuation can be resolved by developing advanced power sources with minimal size and weight, easy portability, lower cost and good energy storage capacity. Implementation of novel smart materials enables a colossal scope for actuation in future exoskeleton developments. Improved versions of sliding mode control reported in the literature are suitable for robust control of nonlinear exoskeleton models. Optimizing the controller parameters with the help of evolutionary algorithms is also an effective method for exoskeleton control. The experiments using VR/AR and games for rehabilitation training yielded promising results as the performance of patients improved substantially.

Robotic exoskeleton-based rehabilitation will help to reduce the fatigue of physiotherapists. Repeated and intention-based exercise will improve the recovery of the affected part at a faster pace. Improved rehabilitation training methods like VR/AR-based technologies help in motivating the subject.

The paper describes the recent methods for signal sensing, actuation, control and rehabilitation training approaches used in developing exoskeletons. All these areas are key elements in an exoskeleton where the review papers are published very limitedly. Therefore, this paper will stand as a guide for the researchers working in this domain.

The purpose of this paper is to provide a hybrid adaptive impedance-leader-follower control algorithm for multi-arm coordination manipulators, which is significant for dealing with the problems of kinematics inconsistency and error accumulation of interactive force in multi-arm system.

This paper utilized a motion mapping theory in Cartesian space to establish a centralized dynamic leader-follower control algorithm which helped to reduce the possibility of kinematics inconsistency for multiple manipulators. A virtual linear spring model (VLSM) was presented based on a recognition approach of characteristic marker. This paper accomplished an adaptive impedance control algorithm based on the VLSM, which took into account the non-rigid contact characteristic. Experimentally demonstrated results showed the proposed algorithm guarantees that the motion and interactive forces asymptotically converge to the prescribed values.

The hybrid control method improves the accuracy and reliability of multi-arm coordination system, which presents a new control framework for multiple manipulators.

This algorithm has significant commercial applications, as a means of controlling multi-arm coordination manipulators that could serve to handle large objects and assemble complicated objects in industrial and hazardous environment.

This work presented a new control framework for multiple coordination manipulators, which can ensure consistent kinematics and reduce the influence of error accumulation, and thus can improve the accuracy and reliability of multi-arm coordination system.

Stiffness control of redundant robot arm, aimed at using extra degrees of freedom (DoF) to shape the robot tool center point (TCP) elastomechanical behavior to be consistent with the essential requirements needed for a successful part mating process, i.e., to mimic part supporting mechanism with selective quasi-isotropic compliance (Remote Center of Compliance – RCC), with additional properties of inherent flexibility.

Theoretical analysis and synthesis of the complementary projector for null-space stiffness control of kinematically redundant robot arm. Practical feasibility of the proposed approach was proven by extensive computer simulations and physical experiments, based on commercially available 7 DoF SIA 10 F Yaskawa articulated robot arm, equipped with the open-architecture control system, system for generating excitation force, dedicated sensory system for displacement measurement and a system for real-time acquisition of sensory data.

Simulation experiments demonstrated convergence and stability of the proposed complementary projector. Physical experiments demonstrated that the proposed complementary projector can be implemented on the commercially available anthropomorphic redundant arm upgraded with open-architecture control system and that this projector has the capacity to efficiently affect the task-space TCP stiffness of the robot arm, with a satisfactory degree of consistency with the behavior obtained in the simulation experiments.

A novel complementary projector was synthesized based on the adopted objective function. Practical verification was conducted using computer simulations and physical experiments. For the needs of physical experiments, an adequate open-architecture control system was developed and upgraded through the implementation of the proposed complementary projector and an adequate system for generating excitation and measuring displacement of the robot TCP. Experiments demonstrated that the proposed complementary projector for null-space stiffness control is capable of producing the task-space TCP stiffness, which can satisfy the essential requirements needed for a successful part-mating process, thus allowing the redundant robot arm to mimic the RCC supporting mechanism behavior in a programmable manner.

This paper aims to describe how a novel biomimetic chewing robot was designed, including its motion, force, control and mechanical designs, and shows some initial experiments about motion tracking.

According to the biomechanics, the authors modeled the muscles of mastication in six linkages and the temporomandibular joint in higher kinematic pairs of point contact. As a result, the chewing robot was represented in a redundantly actuated parallel mechanism. With reference to literature data on the biological system, the authors specified the motion and force requirements for the robot via inverse kinematics and force analysis. A prototype of the robot was built, which has a position control system and is driven by six linear actuators. Experiments were conducted to show the capability of the robot in reproducing the human chewing motion.

A chewing robot was successfully modeled and developed, which is able to simulate the motion of human mastication in a biologically faithful way.

The chewing robot as a scientific instrument can be used to test dental materials and evaluate food textural properties of chewing.

Two higher kinematic pairs of point contact are proposed to simulate the two temporomandibular joints. The mechanism of the novel chewing robot is the first of this kind, which has two higher kinematic pairs of point contact and is a redundantly actuated spatial parallel mechanism.

Describes the experience of setting up a cooperative arm system based on individual open‐architecture controllers. Two six‐degree‐of‐freedom industrial manipulators, one of which is mounted on a moving track, are installed to realize a cooperative experimental set‐up. The main issues related to the cooperative manipulation are overviewed and its potential applications in industry are discussed. A brief description of the system’s components is given. The most relevant problems encountered in setting up the cooperative system based on individual control architectures are detailed. The result of the experience is that by using available industrial manipulators, rather than prototypes, and without re‐designing the controller hardware, it is possible to realize a cooperative manipulator system.