Search results
1 – 10 of 618Salim Caliskan and Hakan Akyuz
This study aims to investigate the effect of speckle pattern on displacement measurements using different speckle diameters and coverage ratios.
Abstract
Purpose
This study aims to investigate the effect of speckle pattern on displacement measurements using different speckle diameters and coverage ratios.
Design/methodology/approach
In order to compare the coverage ratio and speckle diameter during the evaluation of the correlation of digital images (DIC) study, template speckle plates were produced on a computer numerical control (CNC) punch press with 600 punches per minute. After the speckle plates were manufactured, the speckled pattern was randomly painted on a plain white side through the manufactured template plates, and then tensile tests were performed under the same loading conditions for each sample to observe displacement variation via correlation parameters.
Findings
During the manufacturing of templates with thin plates, a punch diameter of less than 1.7 mm will cause tool failure; therefore, uniform speckle size can be assessed before operation. A higher coverage ratio resulted in more accurate and reliable results in displacement data. With smaller coverage, the facet size should be increased to achieve favorable results.
Research limitations/implications
If thick template plates are selected, speckle painting cannot be done properly; therefore, template thickness shall also be assessed before operation.
Practical implications
For randomly distributed DIC templates, increasing coverage beyond 50% does not make sense due to difficulties in the production process in the punch press.
Originality/value
Evaluating DIC results via templates manufactured in a punch press with different speckle diameters and coverage ratios is a new topic in literature.
Details
Keywords
Chuloh Jung, Muhammad Azzam Ismail, Mohammad Arar and Nahla AlQassimi
This study aims to evaluate the efficiency of various techniques for enhancing indoor air quality (IAQ) in construction. It analyzed the alterations in the concentration of indoor…
Abstract
Purpose
This study aims to evaluate the efficiency of various techniques for enhancing indoor air quality (IAQ) in construction. It analyzed the alterations in the concentration of indoor air pollutants over time for each product employed in controlling pollution sources and removing it, which included eco-friendly substances and adsorbents. The study will provide more precise and dependable data on the effectiveness of these control methods, ultimately supporting the creation of more efficient and sustainable approaches for managing indoor air pollution in buildings.
Design/methodology/approach
The research investigates the impact of eco-friendly materials and adsorbents on improving indoor air quality (IAQ) in Dubai's tall apartment buildings. Field experiments were conducted in six units of The Gate Tower, comparing the IAQ of three units built with “excellent” grade eco-friendly materials with three built with “good” grade materials. Another experiment evaluated two adsorbent products (H and Z) in the Majestic Tower over six months. Results indicate that “excellent” grade materials significantly reduced toluene emissions. Adsorbent product Z showed promising results in pollutant reduction, but there is concern about the long-term behavior of adsorbed chemicals. The study emphasizes further research on household pollutant management.
Findings
The research studied the effects of eco-friendly materials and adsorbents on indoor air quality in Dubai's new apartments. It found that apartments using “excellent” eco-friendly materials had significantly better air quality, particularly reduced toluene concentrations, compared to those using “good” materials. However, high formaldehyde (HCHO) emissions were observed from wood products. While certain construction materials led to increased ethylbenzene and xylene levels, adsorbent product Z showed promise in reducing pollutants. Yet, there is a potential concern about the long-term rerelease of these trapped chemicals. The study emphasizes the need for ongoing research in indoor pollutant management.
Research limitations/implications
The research, while extensive, faced limitations in assessing the long-term behavior of adsorbed chemicals, particularly the potential for rereleasing trapped pollutants over time. Despite the study spanning a considerable period, indoor air pollutant concentrations in target households did not stabilize, making it challenging to determine definitive improvement effects and reduction rates among products. Comparisons were primarily relative between target units, and the rapid rise in pollutants during furniture introduction warrants further examination. Consequently, while the research provides essential insights, it underscores the need for more prolonged and comprehensive evaluations to fully understand the materials' and adsorbents' impacts on indoor air quality.
Practical implications
The research underscores the importance of choosing eco-friendly materials in new apartment constructions for better IAQ. Specifically, using “excellent” graded materials can significantly reduce harmful pollutants like toluene. However, the study also highlights that certain construction activities, such as introducing furniture, can rapidly elevate pollutant levels. Moreover, while adsorbents like product Z showed promise in reducing pollutants, there is potential for adsorbed chemicals to be rereleased over time. For practical implementation, prioritizing higher-grade eco-friendly materials and further investigation into furniture emissions and long-term behavior of adsorbents can lead to healthier indoor environments in newly built apartments.
Originality/value
The research offers a unique empirical assessment of eco-friendly materials' impact on indoor air quality within Dubai's rapidly constructed apartment buildings. Through field experiments, it directly compares different material grades, providing concrete data on pollutant levels in newly built environments. Additionally, it explores the efficacy of specific adsorbents, which is of high value to the construction and public health sectors. The findings shed light on how construction choices can influence indoor air pollution, offering valuable insights to builders, policymakers and residents aiming to promote public health and safety in urban living spaces.
Details
Keywords
The primary objective of this investigation was to explore how employees’ utilization of social media for work-related purposes impacts their service innovation behavior, both…
Abstract
Purpose
The primary objective of this investigation was to explore how employees’ utilization of social media for work-related purposes impacts their service innovation behavior, both directly and through the intermediary mechanisms of knowledge management and employees’ risk-taking.
Design/methodology/approach
In developing its conceptual framework, this study has drawn upon the stimulus-organism-response (SOR) theory. To test its hypotheses, this study has surveyed 241 financial analysts from ten Iranian financial companies and has employed variance-based structural equation modeling (specifically, PLS-SEM) with the assistance of “WarpPLS 8.0 software.”
Findings
The findings revealed that employees’ work-related use of social media positively influences their service innovation behavior using knowledge management, encompassing knowledge sharing and acquisition capability as well as employee risk-taking. However, this influence is not directly significant.
Originality/value
To the best of our knowledge, this study marks the first instance in which the effect of work-related use of social media on employee service innovation behavior directly and through the mediating roles of knowledge management and risk-taking has been investigated through the lens of the SOR paradigm, especially in the financial sector.
Details
Keywords
Andreas Gschwentner, Manfred Kaltenbacher, Barbara Kaltenbacher and Klaus Roppert
Performing accurate numerical simulations of electrical drives, the precise knowledge of the local magnetic material properties is of utmost importance. Due to the various…
Abstract
Purpose
Performing accurate numerical simulations of electrical drives, the precise knowledge of the local magnetic material properties is of utmost importance. Due to the various manufacturing steps, e.g. heat treatment or cutting techniques, the magnetic material properties can strongly vary locally, and the assumption of homogenized global material parameters is no longer feasible. This paper aims to present the general methodology and two different solution strategies for determining the local magnetic material properties using reference and simulation data.
Design/methodology/approach
The general methodology combines methods based on measurement, numerical simulation and solving an inverse problem. Therefore, a sensor-actuator system is used to characterize electrical steel sheets locally. Based on the measurement data and results from the finite element simulation, the inverse problem is solved with two different solution strategies. The first one is a quasi Newton method (QNM) using Broyden's update formula to approximate the Jacobian and the second is an adjoint method. For comparison of both methods regarding convergence and efficiency, an artificial example with a linear material model is considered.
Findings
The QNM and the adjoint method show similar convergence behavior for two different cutting-edge effects. Furthermore, considering a priori information improved the convergence rate. However, no impact on the stability and the remaining error is observed.
Originality/value
The presented methodology enables a fast and simple determination of the local magnetic material properties of electrical steel sheets without the need for a large number of samples or special preparation procedures.
Details
Keywords
Yanhao Sun, Tao Zhang, Shuxin Ding, Zhiming Yuan and Shengliang Yang
In order to solve the problem of inaccurate calculation of index weights, subjectivity and uncertainty of index assessment in the risk assessment process, this study aims to…
Abstract
Purpose
In order to solve the problem of inaccurate calculation of index weights, subjectivity and uncertainty of index assessment in the risk assessment process, this study aims to propose a scientific and reasonable centralized traffic control (CTC) system risk assessment method.
Design/methodology/approach
First, system-theoretic process analysis (STPA) is used to conduct risk analysis on the CTC system and constructs risk assessment indexes based on this analysis. Then, to enhance the accuracy of weight calculation, the fuzzy analytical hierarchy process (FAHP), fuzzy decision-making trial and evaluation laboratory (FDEMATEL) and entropy weight method are employed to calculate the subjective weight, relative weight and objective weight of each index. These three types of weights are combined using game theory to obtain the combined weight for each index. To reduce subjectivity and uncertainty in the assessment process, the backward cloud generator method is utilized to obtain the numerical character (NC) of the cloud model for each index. The NCs of the indexes are then weighted to derive the comprehensive cloud for risk assessment of the CTC system. This cloud model is used to obtain the CTC system's comprehensive risk assessment. The model's similarity measurement method gauges the likeness between the comprehensive risk assessment cloud and the risk standard cloud. Finally, this process yields the risk assessment results for the CTC system.
Findings
The cloud model can handle the subjectivity and fuzziness in the risk assessment process well. The cloud model-based risk assessment method was applied to the CTC system risk assessment of a railway group and achieved good results.
Originality/value
This study provides a cloud model-based method for risk assessment of CTC systems, which accurately calculates the weight of risk indexes and uses cloud models to reduce uncertainty and subjectivity in the assessment, achieving effective risk assessment of CTC systems. It can provide a reference and theoretical basis for risk management of the CTC system.
Details
Keywords
Marcus Gerdin, Ella Kolkowska and Åke Grönlund
Research on employee non-/compliance to information security policies suffers from inconsistent results and there is an ongoing discussion about the dominating survey research…
Abstract
Purpose
Research on employee non-/compliance to information security policies suffers from inconsistent results and there is an ongoing discussion about the dominating survey research methodology and its potential effect on these results. This study aims to add to this discussion by investigating discrepancies between what the authors claim to measure (theoretical properties of variables) and what they actually measure (respondents’ interpretations of the operationalized variables). This study asks: How well do respondents’ interpretations of variables correspond to their theoretical definitions? What are the characteristics of any discrepancies between variable definitions and respondent interpretations?
Design/methodology/approach
This study is based on in-depth interviews with 17 respondents from the Swedish public sector to understand how they interpret questionnaire measurement items operationalizing the variables Perceived Severity from Protection Motivation Theory and Attitude from Theory of Planned Behavior.
Findings
The authors found that respondents’ interpretations in many cases differ substantially from the theoretical definitions. Overall, the authors found four principal ways in which respondents interpreted measurement items – referred to as property contextualization, extension, alteration and oscillation – each implying more or less (dis)alignment with the intended theoretical properties of the two variables examined.
Originality/value
The qualitative method used proved vital to better understand respondents’ interpretations which, in turn, is key for improving self-reporting measurement instruments. To the best of the authors’ knowledge, this study is a first step toward understanding how precise and uniform definitions of variables’ theoretical properties can be operationalized into effective measurement items.
Details
Keywords
Inma Rodríguez-Ardura, Antoni Meseguer-Artola, Doaa Herzallah and Qian Fu
There is an ongoing challenge to map the efficacy of e-retailing strategies in building both value co-creation opportunities for online customers and customer value for companies…
Abstract
Purpose
There is an ongoing challenge to map the efficacy of e-retailing strategies in building both value co-creation opportunities for online customers and customer value for companies. Based on the service-dominant (S-D) logic, an integrative model is provided that connects the impact of convenience and personalisation strategies (CPSs) on an e-retailer's performance – by offering co-creation opportunities and customer engagement.
Design/methodology/approach
The survey instrument is validated and the model is tested with data from active online customers using a novel methodology that blends artificial neural network (ANN) analysis with partial least squares (PLS) in both the measurement model and the path analysis.
Findings
The findings robustly support the model and yield evidence of the contribution of CPSs in effective value propositions, the interface between the S-D logic and customer engagement, and the direct effect of customer engagement on tangible forms of value for companies.
Originality/value
This study is the first scholarly effort to provide a comprehensive understanding of how and why CPSs can maximise customer value for the e-retailer, while simultaneously testing the customer value/engagement interface with a new blended ANN-PLS method.
Details
Keywords
Worapan Kusakunniran, Pairash Saiviroonporn, Thanongchai Siriapisith, Trongtum Tongdee, Amphai Uraiverotchanakorn, Suphawan Leesakul, Penpitcha Thongnarintr, Apichaya Kuama and Pakorn Yodprom
The cardiomegaly can be determined by the cardiothoracic ratio (CTR) which can be measured in a chest x-ray image. It is calculated based on a relationship between a size of heart…
Abstract
Purpose
The cardiomegaly can be determined by the cardiothoracic ratio (CTR) which can be measured in a chest x-ray image. It is calculated based on a relationship between a size of heart and a transverse dimension of chest. The cardiomegaly is identified when the ratio is larger than a cut-off threshold. This paper aims to propose a solution to calculate the ratio for classifying the cardiomegaly in chest x-ray images.
Design/methodology/approach
The proposed method begins with constructing lung and heart segmentation models based on U-Net architecture using the publicly available datasets with the groundtruth of heart and lung masks. The ratio is then calculated using the sizes of segmented lung and heart areas. In addition, Progressive Growing of GANs (PGAN) is adopted here for constructing the new dataset containing chest x-ray images of three classes including male normal, female normal and cardiomegaly classes. This dataset is then used for evaluating the proposed solution. Also, the proposed solution is used to evaluate the quality of chest x-ray images generated from PGAN.
Findings
In the experiments, the trained models are applied to segment regions of heart and lung in chest x-ray images on the self-collected dataset. The calculated CTR values are compared with the values that are manually measured by human experts. The average error is 3.08%. Then, the models are also applied to segment regions of heart and lung for the CTR calculation, on the dataset computed by PGAN. Then, the cardiomegaly is determined using various attempts of different cut-off threshold values. With the standard cut-off at 0.50, the proposed method achieves 94.61% accuracy, 88.31% sensitivity and 94.20% specificity.
Originality/value
The proposed solution is demonstrated to be robust across unseen datasets for the segmentation, CTR calculation and cardiomegaly classification, including the dataset generated from PGAN. The cut-off value can be adjusted to be lower than 0.50 for increasing the sensitivity. For example, the sensitivity of 97.04% can be achieved at the cut-off of 0.45. However, the specificity is decreased from 94.20% to 79.78%.
Details
Keywords
Dongbei Bai, Lei Ye, ZhengYuan Yang and Gang Wang
Global climate change characterized by an increase in temperature has become the focus of attention all over the world. China is a sensitive and significant area of global climate…
Abstract
Purpose
Global climate change characterized by an increase in temperature has become the focus of attention all over the world. China is a sensitive and significant area of global climate change. This paper specifically aims to examine the association between agricultural productivity and the climate change by using China’s provincial agricultural input–output data from 2000 to 2019 and the climatic data of the ground meteorological stations.
Design/methodology/approach
The authors used the three-stage spatial Durbin model (SDM) model and entropy method for analysis of collected data; further, the authors also empirically tested the climate change marginal effect on agricultural productivity by using ordinary least square and SDM approaches.
Findings
The results revealed that climate change has a significant negative effect on agricultural productivity, which showed significance in robustness tests, including index replacement, quantile regression and tail reduction. The results of this study also indicated that by subdividing the climatic factors, annual precipitation had no significant impact on the growth of agricultural productivity; further, other climatic variables, including wind speed and temperature, had a substantial adverse effect on agricultural productivity. The heterogeneity test showed that climatic changes ominously hinder agricultural productivity growth only in the western region of China, and in the eastern and central regions, climate change had no effect.
Practical implications
The findings of this study highlight the importance of various social connections of farm households in designing policies to improve their responses to climate change and expand land productivity in different regions. The study also provides a hypothetical approach to prioritize developing regions that need proper attention to improve crop productivity.
Originality/value
The paper explores the impact of climate change on agricultural productivity by using the climatic data of China. Empirical evidence previously missing in the body of knowledge will support governments and researchers to establish a mechanism to improve climate change mitigation tools in China.
Details
Keywords
Mahesh Babu Purushothaman and Kasun Moolika Gedara
This pragmatic research paper aims to unravel the smart vision-based method (SVBM), an AI program to correlate the computer vision (recorded and live videos using mobile and…
Abstract
Purpose
This pragmatic research paper aims to unravel the smart vision-based method (SVBM), an AI program to correlate the computer vision (recorded and live videos using mobile and embedded cameras) that aids in manual lifting human pose deduction, analysis and training in the construction sector.
Design/methodology/approach
Using a pragmatic approach combined with the literature review, this study discusses the SVBM. The research method includes a literature review followed by a pragmatic approach and lab validation of the acquired data. Adopting the practical approach, the authors of this article developed an SVBM, an AI program to correlate computer vision (recorded and live videos using mobile and embedded cameras).
Findings
Results show that SVBM observes the relevant events without additional attachments to the human body and compares them with the standard axis to identify abnormal postures using mobile and other cameras. Angles of critical nodal points are projected through human pose detection and calculating body part movement angles using a novel software program and mobile application. The SVBM demonstrates its ability to data capture and analysis in real-time and offline using videos recorded earlier and is validated for program coding and results repeatability.
Research limitations/implications
Literature review methodology limitations include not keeping in phase with the most updated field knowledge. This limitation is offset by choosing the range for literature review within the last two decades. This literature review may not have captured all published articles because the restriction of database access and search was based only on English. Also, the authors may have omitted fruitful articles hiding in a less popular journal. These limitations are acknowledged. The critical limitation is that the trust, privacy and psychological issues are not addressed in SVBM, which is recognised. However, the benefits of SVBM naturally offset this limitation to being adopted practically.
Practical implications
The theoretical and practical implications include customised and individualistic prediction and preventing most posture-related hazardous behaviours before a critical injury happens. The theoretical implications include mimicking the human pose and lab-based analysis without attaching sensors that naturally alter the working poses. SVBM would help researchers develop more accurate data and theoretical models close to actuals.
Social implications
By using SVBM, the possibility of early deduction and prevention of musculoskeletal disorders is high; the social implications include the benefits of being a healthier society and health concerned construction sector.
Originality/value
Human pose detection, especially joint angle calculation in a work environment, is crucial to early deduction of muscoloskeletal disorders. Conventional digital technology-based methods to detect pose flaws focus on location information from wearables and laboratory-controlled motion sensors. For the first time, this paper presents novel computer vision (recorded and live videos using mobile and embedded cameras) and digital image-related deep learning methods without attachment to the human body for manual handling pose deduction and analysis of angles, neckline and torso line in an actual construction work environment.
Details