Search results

This paper aims to promote the higher quality development of high-tech enterprises in China. While science and technology have greatly promoted human civilization, resources have been excessively consumed and the environment has been sharply polluted. Therefore, it is particularly important for current enterprises to make use of scientific and technological innovation to maximize the benefits of mankind, minimize the loss of nature, and promote the sustainable development of our country.

By using DEA-Banker-Charnes-Cooper (BCC) model and DEA-Malmquist model, this paper comprehensively examines the innovation efficiency of high-tech enterprises from both static and dynamic perspectives, and conducts a provincial comparative study with the panel data of ten representative provinces from 2011 to 2020.

The research findings are as follows: the rapid number increase of high-tech enterprises in most provinces (cities) is accompanied by an ineffective input–output efficiency; the quality of high-tech enterprises needs to comprehensively examine both input–output efficiency and total factor productivity; and there is not a positive correlation between element investment and innovation performance.

Because the DEA model used in this paper assumes that the improvement direction of invalid units is to ensure that the input ratio of various production factors remains unchanged but sometimes the proportion of scientific and technological activities personnel and the total research and development investment is not constant. In the future, the nonradial DEA model can be considered for further research. Due to historical data statistics, more provinces, cities and longer panel data are difficult to obtain. The samples studied in this paper mainly refer to the provinces and cities that ranked first in the number of national high-tech enterprises in 2020. Limited by the number of samples, DEA analysis failed to select more input and output indicators. In the future, with the accumulation of statistical data, the existing efficiency analysis will be further optimized.

Aiming at the misunderstanding of emphasizing quantity and neglecting quality in the cultivation of high-tech enterprises, this paper comprehensively uses DEA-BCC model and DEA Malmquist index decomposition method to make a comprehensive comparative study on the development of high-tech enterprises in ten representative provinces (cities) from two aspects of static efficiency evaluation and dynamic efficiency evaluation.

Digitalisation, which involves the use of digital technologies in transforming an organisation’s activities, transcends just the acquiring of emerging digital tools. Having the right people to drive the implementation of these technologies and attaining strategic organisational goals is essential. While most studies have focused on the use of emerging technologies in the construction industry, less attention has been given to the ‘people’ dimension. Therefore, this study aims to assess the people-related features needed for construction digitalisation.

The study adopted pragmatic thinking using a mixed-method approach. A Delphi was used to achieve the qualitative aspect of the research, while a questionnaire survey conducted among 222 construction professionals was used to achieve the quantitative aspect. The data gathered were analysed using frequency, percentage, mean item score, Kruskal–Wallis H test, exploratory factor analysis and confirmatory factor analysis.

Based on acceptable reliability, validity and model fit indices, the study found that the people-related factors needed for construction digitalisation can be grouped into technical capability of personnel, attracting and retaining digital talent and organisation’s digital culture.

The findings offer valuable benefits to construction organisations as understanding these identified people features can help lead to better deployment of digital tools and the attainment of the digital transformation.

This study attempts to fill the gap in the shortage of literature exploring the people dimension of construction digitalisation. The study offers an excellent theoretical backdrop for future works on digital talent for construction digitalisation, which has gained less attention in the current construction digitalisation discourse.

The sustainability of the construction industry is associated with the productivity, profitability and competitiveness of the firms, which are significantly affected by inefficient site supervision and labour management approaches. This study aims to use a case study with mixed methods to evaluate the site supervisory characteristics in labour management, labour performance assessment and labour productivity measurement towards developing meaningful guidelines in polishing construction supervision attributes.

Well-developed modern apprenticeship elements were applied to 62 construction supervisors who were selected using the snowball sampling method, and their relevant competency characteristics were assessed using a comprehensively developed grading mechanism connected with useful training manuals/tools. Academic reviews, experts’ consultations and other meticulous mixed approaches were applied at different stages of the research plan’s sequential layout.

The mean performance scores of supervisors indicate proficient-level grades in the competency characteristics related to applying efficient labour management procedures and developing-level grades in designing productivity measurement tools, performing assessments on efficiency and productivity and proposing enhancement practices on efficiency and productivity for site operations. The findings point to a modern generalised guideline that establishes the ranges of supervisory attributes within the scope of the study. The validity, reliability, adaptability and generalisability of the findings were assured by using pertinent statistical tests and professional assessments.

Though the study’s conclusions/findings are primarily applicable to the construction environment of a developing country comparable to the Sri Lankan context, they will considerably impact current/future industrial practices in various other countries and emerging industries.

The research has produced a conceptualised modern tool that guides determining the capacity levels of supervisory attributes for carrying out labour management, labour performance assessment and labour productivity measurement aspects in construction. The research has opened a pump that inflows new values of highly workable supervision features for strengthening the site management structures and filling the industry’s knowledge vacuum in the methodical execution of apprenticeships.

In this case study, we examine how a citrus peel valorising company based in the Netherlands was able to adopt a circular business model while navigating regulatory, managerial, and supply chain-related barriers.

In-depth, semi-structured interviews with key personnel in the company, notes from field observations, photographs of the production process, and documents from a legal judgement served as data for this single, qualitative case study. Data were coded inductively using the in vivo technique and were further developed into four themes and a case description.

Results from our study indicate that the regulatory and political contexts in the Netherlands were critical to the company’s success. Like in the case of most fruitful industrial symbioses, partnerships founded on mutual trust and economically appealing value propositions played a crucial role in ensuring commercial viability. Collaborating with larger corporations and maintaining transparent communication with stakeholders were also significant contributing factors. Lastly, employees’ outlook towards circularity combined with their willingness to learn new skills were important driving factors as well.

In addition to expanding the scholarship on the adoption of circular business models, this research offers novel insights to policymakers and practitioners. It provides empirical evidence regarding the importance of public awareness, adaptable legislation, and harmonised policy goals for supporting sustainable entrepreneurship in the circular economy.

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

Studies of inter-organizational relationships have traditionally overlooked the human resource management (HRM) field, with most research focusing on collaborations in the technical domain. This study endeavors to explore the impact of organizational human resources (HR) collaborations on HR innovativeness, drawing on theories about organizational learning capabilities to explain this connection. By analyzing the synergies arising from inter-organizational HR collaborations, this study aims to seek to shed light on the potential for HRM to contribute to organizational performance and foster innovation.

The study is based on a quantitative survey conducted among 326 Dutch companies. The survey aims to find out whether these companies collaborate with other organizations on HR-related issues, the extent to which they renew their HRM function, and whether they apply organizational learning practices. The data collected for the survey are analyzed using Hayes PROCESS macro to investigate mediation effects.

As per the study, HR collaboration results in innovation. The research suggests that collaborating with HR across different organizations significantly contributes to HR innovation. This relationship can be explained by the inter-organizational learning practices that organizations adopt. Therefore, when organizations collaborate with each other, they learn from each other, which enhances their learning capabilities and ultimately leads to HR innovation.

This study delves into the extent to which organizations collaborate on HR-related issues, which is a relatively new field. Moreover, it contributes to the research on the connection between inter-organizational relationships and innovation by showing how much of it is explained by organizational learning.

This study aims to investigate the synergies between the economic environment and the smart living dimension embedded in the current smart city initiatives, focusing on the localization of female entrepreneurship in contemporary cities. This interaction is under-investigated and controversial as it includes cities' practices enabling users and citizens to develop their potential and build their own lives, affecting entrepreneurial and economic outcomes. Building upon the perspective of the innovation ecosystems, this study focuses on the impact of smart living dimensions and R&D investments on the localization of female entrepreneurial activities.

The study uses a Generalized Method of Moments (GMM) and a panel dataset that considers 30 Italian smart city projects for 12 years to demonstrate the relationship between smart living practices in cities and the localization of female entrepreneurship. The complementary effect of public R&D investment is also included as a driver in the “smart” city transition.

The study found that the advancement of smart living practices in cities drives the localization of female entrepreneurship. The study highlights the empirical results, the interaction over the years and a current overview through choropleth maps. The public R&D investment also affects this relationship.

This study advances the theoretical discussion on (1) female entrepreneurial intentions, (2) smart city advancement (as a context) and (3) smart living dimension (as a driver) and offers valuable insight for governance and policymakers.

This study offers empirical contributions to the preliminary academic debate on enterprise development and smart city trajectories at the intersection between human-based practices and female entrepreneurship.

This study offers empirical contributions to the preliminary academic debate on enterprise development and smart city trajectories at the intersection between human-based practices and female entrepreneurship. The findings provide valuable insights into the localization of female entrepreneurship in the context of smart cities.

This paper reviews the literature on disability inclusion (DI) in supply and demand chains of hospitality and tourism (H&T) organisations. The purpose of this study is to assess disability support and interventions within H&T organisations. Through the assessment, we identified gaps to recommend H&T scholars’ and practitioners’ knowledge of DI from new perspectives.

An integrative review was conducted to examine the published evidence on DI in H&T organisations. This study used high-ranking H&T journals from the Scopus and Web of Science databases between 2001 and 2023. In total, 101 empirical papers met the criteria for the review analysis.

DI focuses heavily on customer disabilities, with scant research on DI in H&T employment. The review emphasises the critical need for empirical research into the varied disability employment ecosystem within H&T organisations, focusing on social integration for inclusive workplaces.

This study contributes to the H&T literature, which previously overlooked the disability context in diversity. The research offers strategies for creating inclusive environments in the H&T industry for disabled consumers and producers.

The South African vocational education and training (VET) sector is required by legislation to redefine postsecondary education, advance industrialisation and expand the job market to address unemployment in the country. Yet, VET leaders' heterogenous educational and occupational backgrounds do not enable them to address the needs of the VET sector. Continuous professional development of leaders in the education sector needs to include support structures such as mentoring.

The present study sought to investigate how VET managers in South Africa perceive three different types of mentoring – individual, peer group and expert-based key performance area (KPA) mentoring – during a part-time professional leadership development programme. Using interactive qualitative analysis (IQA), the authors collected and analysed data from focus group discussions (n = 24) and individual interviews (n = 21) from two cohorts of the programme.

The results revealed that individual mentoring represented the most important driving mechanism, followed by peer group mentoring and expert-based KPA mentoring. Participants identified leadership as a prerequisite for their development. Emotions formed the final outcome of the mentoring framework.

Based on the findings, the authors suggest investigating the role played by leaders' interpersonal competences such as emotional competence in the workplace. Additionally, research needs to clarify if and how mentoring can support leaders to develop interpersonal competences in formal and informal settings.

The study offers empirical evidence on a three-pillar mentoring framework adopted in a professional development programme for leaders in VET in South Africa. It highlights the importance of individual, social and emotional factors.

The purpose of this study is to investigate the pivotal role of environmental innovations in driving sustainability practices within medium and large manufacturing firms operating in Uganda.

Using a cross-sectional and quantitative methodology, data were collected through a questionnaire survey involving 208 manufacturing companies. The smart partial least squares path modelling technique was used for the analysis.

The analysis unveils significant and positive associations. Specifically, product innovation exhibits a robust and affirmative relationship with sustainability practices. Similarly, the correlation between process innovation and sustainability practices emerges as statistically significant. Moreover, the findings underscore the noteworthy and constructive predictive influence of environmental innovation on sustainability practices.

These empirical results present substantial implications for theoretical frameworks and practical applications. From a policy perspective, the findings emphasise the importance of incentivising eco product and eco process innovations as potential drivers of eco-friendly practices. On the managerial front, strategic resource allocation and the adoption of integrated environmental innovation strategies are advocated, with the ultimate goal of enhancing sustainable business approaches within Uganda’s manufacturing subsector.

To the best of the authors' knowledge, this study represents the inaugural attempt to investigate the role of environmental innovations in elucidating sustainability practices within a least developed country. Notably, while all dimensions demonstrate significance, it is noteworthy that product innovation emerges as the more substantial contributor to the promotion of sustainability practices.