Search results

This study aims to introduce a multi-configuration, three-finger dexterous hand with integrated high-dimensional sensors and provides an analysis of its design, modeling and kinematics.

A mechanical design scheme of the three-finger dexterous hand with a reconfigurable palm is proposed based on the existing research on dexterous hands. The reconfigurable palm design enables the dexterous hand to achieve four grasping modes to adapt to multiple grasping tasks. To further enhance perception, two six-axis force and torque sensors are integrated into each finger. The forward and inverse kinematics equations of the dexterous hand are derived using the D-H method for kinematics modeling, thus providing a theoretical model for index analysis. The performance is evaluated using three widely applied indicators: workspace, interactivity of fingers and manipulability.

The results of kinematics analysis show that the proposed hand has excellent dexterity. Additionally, three different experiments are conducted based on the proposed hand. The performance of the dexterous hand is also verified by fingertip force, motion accuracy test, grasping and in-hand manipulation experiments based on Feix taxonomy. The results show that the dexterous hand has good grasping ability, reproducing 82% of the natural movement of the human hand in daily grasping activities and achieving in-hand manipulations such as translation and rotation.

A novel three-finger dexterous hand with multi-configuration and integrated high-dimensional sensors is proposed. It performs better than the previously designed dexterous hand in actual experiments and kinematic performance analysis.

This paper aims to present a kinematics analysis method and statics based control of the continuum robot with mortise and tenon joints to achieve better control performance of the robot.

The kinematics model is derived by the geometric analysis method under the piecewise constant curvature assumption, and the workspace and dexterity of the proposed robot are analyzed to optimize its structure parameters. Moreover, the statics model is established by the principle of virtual work, which is used to analyze the mapping relationship between the bending deformation and the applied forces/torques. To improve the control accuracy of the robot, a model-based controller is put forward.

Results of the experiments verify the feasibility of the proposed continuum structure and the correctness of the established model and the control method. The force deviation between the theoretical value and the actual value is relatively small, and the mean value of the deviation between the driving forces is only 0.46 N, which verify the established statics model and the controller.

The proposed model and motion controller can realize its accurate bending control with a few deviations, which can be used as the reference for the motion planning and dynamic model of the continuum robot.

This paper aims to improve the kinematic modeling accuracy of a spatial three-degrees-of-freedom compliant micro-motion parallel mechanism by proposing a modified modeling method based on the structural matrix method (SMM).

This paper analyzes the problem that the torsional compliance equation of the circular notched hinge is no longer applicable because it is subject to bilateral restrained torsion. The torsional compliance equation is modified by introducing the relative length coefficient. The input coupling effect, which is often neglected, is considered in kinematic modeling. The symbolic expression of the input coupling matrix is obtained. Theory, simulation and experimentation are presented to show the validity of the proposed kinematic model.

The results show that the proposed kinematics model can improve the modeling accuracy by comparing the theoretical, finite element method (FEM) and experimental method.

This work provides a feasible scheme for CMPM kinematics modeling. It can be better applied to the optimization design based on the kinematic model in the future.

This research work aims to determine the maximum load a thermoplastic gear can withstand without the occurrence of extended contact. The extended contact of polymer gears is usually overlooked in basic design calculations, although it considerably affects the gear's load-carrying ability. Although various researchers highlighted the phenomenon, an extensive investigation of the extended contact behaviour is limited. Hence the work aims to investigate the premature and extended contact behaviour of thermoplastic gears and its effect in the gear kinematics, bending stiffness, stresses induced and the roll angle subtended by the gear pair.

The work uses finite element method to perform quasi-static two-dimensional analysis of the meshing gear teeth. The FE model was developed in AutoCAD and analysed using ANSYS 19.1 simulation package. A three-dimensional gear model with all the teeth is computationally intensive for solving a static analysis problem. Hence, planar analysis with a reduced number of teeth is considered to reduce the computational time and difficulty.

The roll angle subtended at the centre by the path of approach is higher than the path of recess because of the increased load sharing. The contact stress profile followed a unique R-F-R-F pattern in the premature and extended contact regions due to the driven tip-driver flank surface contact. A non-dimensional parameter was formulated correlating the young's modulus, the load applied and deflection induced that can be utilised to predict the occurrence of premature and extended contact in thermoplastic gears.

The gear rating standards for polymer gears are formulated from the conventional metal gears which does not include the effect of gear tooth deflection. The work attempts to explain the gear tooth deflection for various standard thermoplastics and its effect in kinematics. Likewise, a new dimensionless number was introduced to predict the extended contact that will help in appropriate selection of load reducing the possibility of wear.

In large equipment and highly complex confined workspaces, the maintenance is usually carried out by snake-arm robots with equal cross-sections. However, the equal cross-sectional design results in the snake arm suffering from stress concentration and restricted working space. The purpose of this paper is to design a variable cross-section elephant trunk robot (ETR) that can address these shortcomings through bionic principles.

This paper proposes a cable-driven ETR to explore the advantages and inspiration of variable cross-section features for hyper-redundant robot design. For the kinematic characteristics, the influence of the variable cross-section design on the maximum joint angle of the ETR is analysed using the control variables method and the structural parameters are selected. Based on the biological inspiration of the whole elephant trunk following the movement of the trunk tip, a trajectory-tracking algorithm is designed to solve the inverse kinematics of the ETR.

Simulation and test results show the unique advantages of the proposed variable cross-section ETR in kinematics and forces, which can reduce stress concentrations and increase the flexibility of movement.

This paper presents a design method for a variable cross-section ETR for confined working spaces, analyses the kinematic characteristics and develops a targeted trajectory control algorithm.

Legged walking robots have numerous advantages over the wheel or tracked robots due to their strong operational ability and exposure to the complex environment. This paper aims to present details about the mechanical formation and a new conceptual elliptical trajectory generation discussed throughout the paper of the quadruped robot.

Initially, a realistic CAD model of the four-legged robot is developed in Solidwork-2019. The proposed model’s forward and inverse kinematics equations are deduced using Denavit–Hartenberg parameters. Based on geometry and kinematics, manipulability and obstacle avoidance are investigated. A method of galloping trajectory is proposed for aiming the increase of upright direction impulse, which is produced by ground reaction force at each step frequency. Furthermore, the locomotion equation of the ellipse trajectory is derived by setting transition angle polynomial of free-fall phase, stance phase and swing phase and the constraints.

Finally, a successive simulation on a 2D sagittal plane is performed to check and verify the usefulness of the proposed trajectory. Before the development of the full quadruped, a single prototype leg is generated for experimental verification of the dynamic simulations.

The proposed trajectory is novel in that it uses force tracking control, which is intended to improve the quadruped robot’s robustness and stability.

Internal gearings are commonly used in transmissions due to their advantages like high-power density. To ensure high efficiency, load-carrying capacity and good noise behavior, a profound knowledge of the local gear mesh is essential. The tooth contact of internal gears relates to a convex and concave surface that form a conformal contact. This is in contrast to external gears, where two convex surfaces form a contraformal contact. This paper aims at a better understanding of conformal contacts under elastohydrodynamic lubrication (EHL) to improve the design of internal gearings.

An existing numerical EHL model is used for studying the characteristic properties of a hard conformal EHL line contact. A hard contraformal EHL line contact is studied as reference. Non-Newtonian fluid behavior and thermal effects are considered. By taking into account the local contact conformity and kinematics, the effects and relevance of the curvature of the lubricant gap and micro-slip are analyzed. In a parameter study, scale effects of the contact radii on film thickness, temperature rise and friction are examined.

The curvature of the lubricant gap and effects of micro-slip are small in hard conformal EHL line contacts. For high micro-slip, it can be neglected. Hence, the modeling of conformal contacts using an equivalent geometry of the contact problem is reasonable. The parameter study shows beneficial tribological aspects of the conformal contact compared to the contraformal contact. Higher film thickness and lower fluid coefficient of friction are observed for conformal contacts, which can be attributed to lower pressures for the case of the same external normal force, or to a higher contact temperature rise for the case of equivalent contact pressure.

Despite its widespread existence, the local geometry and kinematics in hard conformal EHL line contacts like in internal gearings have been rarely studied. The findings help for a better understanding of local contact characteristics and its relevance. The quantified scale effects help to improve the efficiency and load-carrying capacity of machine elements with hard conformal EHL contacts, like internal gearings.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2022-0366/

Biofeedback is used for regulating vestibular adaptation and balance by providing real-time stimulus to the individual during physical activities. This study aimed at (1) developing a wearable device, which tracks balance, counts the number and the direction of balance losses and provides haptic biofeedback through real-time vibration stimulus (2) investigating device efficacy on an adolescent medulloblastoma patient during static and dynamic tasks.

A 16-year-old medulloblastoma patient used the device during 10-m walking and single-leg stance tests. The knee joint kinematics and the number and direction of balance losses were recorded for “with” and “without” biofeedback conditions.

The device helped regulate the knee joint kinematics and reduce the number of balance losses of the medulloblastoma patient. The knee joint movement pattern similarity of the control subject was highly correlated (R² = 0.997, RMSE = 1.232). Conversely, medulloblastoma patient knee joint movement pattern similarity was relatively weak (R² = 0.359, RMSE = 18.6) when “with” and “without” biofeedback conditions were compared. The number of balance losses decreased when the medulloblastoma patient was guided with biofeedback.

The major limitation of this pilot study is the lack of a large and homogeneous number of participants. The medulloblastoma patient used the device while walking after she was given enough time to get used to the tactile biological feedback, so the long-term effect of the device and biofeedback guidance were not investigated. Additionally, the potential desensitization with prolonged use of the device was not evaluated.

Biofeedback reduced the number of balance losses; additionally, the knee joint movement pattern was regulated during static and dynamic tasks. This device can be integrated into the physical therapy of patients with balance, vestibular and postural control impairments.

This is compact and has an easy-to-wear design, patients, who have balance and postural control impairments, can practically use the device during their activities of daily living.

The device promotes physical activity adaptation and regulates gait through continuous and real-time balance control. Its design makes it simple for the user to wear it beneath clothing while using the sensor.

The structural adaptive ability of the soft robot is fully demonstrated in the grasping task of the soft hand. A soft hand can easily realize the envelope operation of the object without planning. With the continuous development of robot applications, researchers are no longer satisfied with the ability of the soft hand to grasp. The purpose of this paper is to perceive the object’s shape while grasping to provide a decision-making basis for more intelligent robot applications.

This paper proposes a dual-signal comparison method to obtain the fingertip position. The dual signal includes the displacement calculated by the static model without considering the external load change and the displacement calculated by the bending sensor. The dual-signal comparison method can use the obvious change trend difference between the above two signals in the hover and contact states to identify the touch position. The authors make the soft hand scan around the object through touch operation to detect the object’s shape, and the tracks of every touch fingertip position can envelop the object’s shape.

The experimental results show that the dual-signal comparison method can accurately identify the contact moment of soft fingers. This detection method makes the soft hand develop the shape detection ability. The soft hand in the experiment can perceive squares, circles and a few other complex shapes.

The dual-signal comparison method proposed in this paper can detect a touch action by using the signal change trend when the working condition suddenly changes with the rough robotic model and sensing, thus improving the utilization value of the measured signal. The problems of large model errors and inaccurate sensors also negatively impact the use of other soft robots. It is generally difficult to achieve good results by directly using these models and sensors with the thinking of rigid robot analysis. The dual-signal comparison method in this paper can provide some reference for this aspect.

This paper aims to present an iterative path-following method with joint limits to solve the problem of large computation cost, movement exceeding joint limits and poor path-following accuracy for the path planning of hyper-redundant snake-like manipulator.

When a desired path is given, new configuration of the snake-like manipulator is obtained through a geometrical approach, then the joints are repositioned through iterations until all the rotation angles satisfy the imposed joint limits. Finally, a new arrangement is obtained through the analytic solution of the inverse kinematics of hyper-redundant manipulator. Finally, simulations and experiments are carried out to analyze the performance of the proposed path-following method.

Simulation results show that the average computation time is 0.1 ms per step for a hyper-redundant manipulator with 12 degrees of freedom, and the deviation in tip position can be kept below 0.02 mm. Experiments show that all the rotation angles are within joint limits.

Currently , the manipulator is working in open-loop, the elasticity of the driving cable will cause positioning error. In future, close-loop control based on real-time attitude detection will be used in in combination with the path-following method to achieve high-precision trajectory tracking.

Through a series of iterative processes, the proposed method can make the manipulator approach the desired path as much as possible within the joint constraints with high precision and less computation time.