Search results

The purpose of this paper is to implement a closed loop regulated bidirectional DC to DC converter for an application in the electric power system of more electric aircraft. To provide a consistent power supply to all of the electronic loads in an aircraft at the desired voltage level, good efficiency and desired transient and steady-state response, a smart and affordable DC to DC converter architecture in closed loop mode is being designed and implemented.

The aircraft electric power system (EPS) uses a bidirectional half-bridge DC to DC converter to facilitate the electric power flow from the primary power source – an AC generator installed on the aircraft engine’s shaft – to the load as well as from the secondary power source – a lithium ion battery – to the load. Rechargeable lithium ion batteries are used because they allow the primary power source to continue recharging them whenever the aircraft engine is running smoothly and because, in the event that the aircraft engine becomes overloaded during takeoff or turbulence, the charged secondary power source can step in and supply the load.

A novel nonsingular terminal sliding mode voltage controller based on exponential reaching law is used to keep the load voltage constant under any of the aforementioned circumstances, and its performance is contrasted with a tuned PI controller on the basis of their respective transient and steady-state responses. The former gives a faster and better transient and steady-state response as compared to the latter.

This research gives a novel control scheme for incorporating an auxiliary power source, i.e. rechargeable battery, in more electric aircraft EPS. The battery is so implemented that it can get regeneratively charged when primary power supply is capable of handling an additional load, i.e. the battery. The charging and discharging of the battery is carried out in closed loop mode to ensure constant battery terminal voltage, constant battery current and constant load voltage as per the requirement. A novel sliding mode controller is used to improve transient and steady-state response of the system.

The present study provides evidence on export advantages of horticultural commodities based on competitiveness, trade balance and seasonality dimensions.

The study delineated horticultural commodities in terms of comparative advantage, examined temporal shifts in export advantages (mapping) and estimated seasonality. Product mapping was carried out using the Revealed Symmetric Comparative Advantage (RSCA) and Trade Balance Index (TBI). Seasonal advantages were examined through a graphical approach along with the objective tests, namely, modified QS-test (QS), Friedman-test (FT) and using a seasonal dummy.

Cucumbers/gherkins, onions, preserved vegetables, fresh grapes, shelled cashew nuts, guavas, mangoes, and spices emerged as the most favorable horticultural products. India has a strong seasonal advantage in dried onions, cucumber/gherkins, shelled cashew nut, dried capsicum, coriander, cumin, and turmeric. The untapped potential in horticulture can be addressed by handling the trade barriers effectively, particularly the sanitary and phytosanitary issues, affecting the exports. Proper policies must be enacted to facilitate the investment in advanced agricultural technologies and logistics to ensure the desired quality and cost effectiveness.

Commodity-specific studies on value chain analysis would provide valuable insights into the issues hindering exports and realizing the untapped export potential.

There is no holistic and recent study illustrating the horticulture export advantages covering a large number of commodities in the Indian context. The study would be helpful to the stakeholders for drawing useful policy implications.

The study aims to drive conceptual clarity around resistance to information technology projects, integrating multiple facets of the phenomenon from earlier studies.

The study conducts a meta-synthesis of qualitative studies on resistance to technology projects; it analyzes those studies at a case-specific level, compares and contrasts emergent concepts against each other, and “translates” those to the rest of the studies. The study uses the seven-step meta-ethnography method by Noblit and Hare to reciprocally translate emergent concepts to construct the conceptual model.

Through meta-synthesis, the study derives a new conceptual model for resistance to information technology projects, exemplifying how the identified antecedents create user resistance and how the phenomenon progresses within organizations.

This study enriches the observations and conclusions of past individual studies while explicating various facets of the mechanisms that generate and progress technology resistance within organizations. It offers fresh insights into the equivocal nature of the phenomenon and the distinctive ways it progresses from individual to group level.

Many ambitious and costly digital transformation efforts do not succeed due to user resistance. Understanding the mechanisms that create user resistance can help organizations manage technology projects better, thereby reducing the technology assimilation gap and protecting returns on related investments.

There have been extensive studies on technology acceptance (enablers) within organizations, while those relating to technology inhibitors are somewhat limited. However, the symmetry of understanding between enablers and inhibitors is vital for organizations to assimilate promising technologies and transform their business models. This model uses a new lens of sensemaking theory to explain how the antecedents trigger perceived threats and resistance behavior; it highlights the nuances around the development of resistance within individuals and its progression to groups. The resultant model offers better generalizability in organizational contexts.

Flow induced by rotating disks is of great practical importance in several engineering applications such as rotating heat exchangers, turbine disks, pumps and many more. The present research has been freshly displayed regarding the implementation of an engine oil-based Casson tri-hybrid nanofluid across a rotating disk in mass and heat transferal developments. The purpose of this study is to contemplate the attributes of the flowing tri-hybrid nanofluid by incorporating porosity effects and magnetization and velocity slip effects, viscous dissipation, radiating flux, temperature slip, chemical reaction and activation energy.

The articulated fluid flow is described by a set of partial differential equations which are converted into one set of higher-order ordinary differential equations (ODEs) by using convenient conversions. The numerical solution of this transformed set of ODEs has been spearheaded by using the effectual bvp4c scheme.

The acquired results show that the heat transmission rate for the Casson tri-hybrid nanofluid is intensified by, respectively, 9.54% and 11.93% when compared to the Casson hybrid nanofluid and Casson nanofluid. Also, the mass transmission rate for the Casson tri-hybrid nanofluid is augmented by 1.09% and 2.14%, respectively, when compared to the Casson hybrid nanofluid and Casson nanofluid.

The current investigation presents an educative response on how the flow profiles vary with changes in the inevitable flow parameters. As per authors’ knowledge, no such scrutinization has been carried out previously; therefore, our results are novel and unique.

The case was developed from secondary sources and interviews with a security analyst. The secondary sources include company annual reports, news reports, analyst reports, industry reports, company websites, stock exchange websites and databases such as Bloomberg and CMIE Prowess.

Increasing competition in product and capital markets has put tremendous pressure on managers to become more cost competitive. To address their firms' uncompetitive cost structures, managers may have to consider dramatic restructuring of their businesses. During 2014–2017, Tata Steel Ltd (TSL) UK considered a series of divestitures and a merger plan to nurse the company back to health. The case considers the economics of the restructuring plan. The case is designed to help students analyze a corporate downsizing program undertaken by a large Indian company in the UK and to highlight the dynamic role of the CFO and governance issues in family firms. It introduces students to issues surrounding a typical restructuring and provides students a platform to practice the estimation of value creation in a restructuring exercise. While some cases on corporate restructuring in the context of developed economies are available, there are very few cases written in an emerging market context. This case bridges that gap. TSL presents a unique opportunity to study corporate restructuring necessitated by a failed cross-border acquisition. It illustrates the potential for value loss in large, cross-border acquisitions. It shows how managerial hubris can prompt family firm owners to overbid in acquisitions and create legacy hot spots. In addition, the case can be used to discuss the causes of governance failures such as weak institutional monitoring and poor legal enforcement in emerging markets that could potentially harm minority shareholders.

The case was developed from secondary sources and interviews with a security analyst. The secondary sources include company annual reports, news reports, analyst reports, industry reports, company websites, stock exchange websites and databases such as Bloomberg and CMIE Prowess.

Employee training and learning have transformed over the years. The movement from classroom training to the blended format represents the magnitude of this evolution. This has placed much attention on self-regulated learning. This study aimed to understand the individual and organizational mechanisms that sustain the formal learning process in organizations. It explored the goals the organizations and employees strive to achieve by investing in learning. Through this, the authors investigated how technology assistance makes learning more goal-oriented, despite the possibility of different goals for different stakeholders. They also examined how person-job fit can be achieved in employee training.

The study adopted a grounded theory-based inductive approach using a qualitative inquiry that used in-depth interviews of employees working in the Indian IT/ITES sector. This sector is knowledge-intensive and engages in constant skill development. A content analysis of the interview transcripts unraveled the most relevant themes from the participants' discussion.

Individual learners use dimensions of self-regulated learning to set and achieve goals such as better performance and career development. On the other hand, organizations use learning support mechanisms such as better access and flexibility to direct employee learning behavior to achieve organizational goals. Focusing on goal congruence leads to better achievement of results. Goal congruence also implies good person-organization fit.

This research established how aligning individual and organizational mechanisms can help achieve training goals that ultimately contribute to organizational performance. The study differentiated itself by investigating training goal setting and goal achievement at two levels – organizational and individual – using a qualitative approach. It also showed how goal congruence is vital in improving organizational performance and how technology-enabled training practices rely on self-regulated learning and help achieve goal congruence.

This paper aims to investigate the relationship between employer branding (EB) and talent retention. The paper also analyses the mediating role of employee engagement in the association between EB and talent retention.

Partial least square structural equation modelling has been applied to carry out the analysis. The findings are based on the perceptions of IT professionals (n = 397) to assess the interrelationship between EB, employee engagement and talent retention.

The paper gives empirical insights on how employee engagement helps promote employer value offerings to the employee, which helps in the successful retention of employees. The results indicate that employee engagement partially mediates the association between EB and talent retention.

This study provides a clear direction to a diversity of practitioners working in IT firms. Building and maintaining sympathetic and emotional connections with co-workers, team leaders and higher managerial employees can help increase employee engagement. The findings can help business planners and managers focus their efforts on employer brand elements for successfully involving their workforce.

Authors believe this study is one of its kind to test the association between EB and talent retention mediated by the engagement level of employees. The present research study will help future academia delve into how EB can significantly impact the engagement and retention of existing employees.

This study aims to investigate the critical role of online brand community (OBC) engagement and brand evangelism: the role of age, gender and membership number.

To achieve the study’s objective, 303 active Facebook OBC users were surveyed. The AMOS structural equation modelling (SEM) is used to test the hypothesised model.

The results indicate that OBC engagement improves brand evangelism. Specifically, the results show that age, gender, and OBC membership number moderate the relationship between OBC engagement and brand evangelism. Interestingly, this study found that female, younger and low-OBC follower consumers more significantly contribute to nourishing brand evangelism than male, older and high-OBC follower counterparts.

OBC engagement is validated as a key brand evangelism driver, further substantiating its role as a crucial strategic metric. Moreover, age, gender and OBC membership number as moderating factors in the association between OBC engagement and brand evangelism (word of mouth referral, brand defence and future purchases) have been verified. Although the findings suggest that improved OBC engagement contributes to evangelism, this effect transpires more significantly among female, younger and low-OBC followers than male, older and high-OBC followers.

Given the difficulties in finding significant exchange rate exposure in the extant literature, this paper attempts to resolve the so-called “exposure puzzle” by investigating whether currency movements have any significant impact on international industry returns.

This paper utilizes the multivariate Generalized AutoRegressive Conditional Heteroskedasticity (MGARCH) methodology to estimate both symmetric and asymmetric exchange rate exposures for each industry common across 12 countries simultaneously.

The empirical results show that exchange rate exposure is not only statistically significant but also economically important based on the estimation of an asymmetric three-factor exposure model using MGARCH methodology. This is an extremely important finding as it suggests that the “exposure puzzle” may not be a puzzle at all once a better methodology is utilized in the estimation.

Because this study tries to resolve the exchange rate exposure puzzle by focusing on whether exchange rate movements affect ex-post returns as opposed to ex ante expected returns and given the significant exposures with respect to different risk factors found in the study, it is interesting to see if any of these risk factors commands a risk premium. In other words, a natural extension of this study is to test whether any of these risk factors is priced in international industry returns.

The findings of the study have interesting implications for international investors who would like to diversify their portfolios across different industries and are concerned about whether the unexpected movements in the bilateral exchange rates will affect their portfolio returns in addition to its interest rate and world market risk exposures.

The study utilizes the MGARCH methodology, which has not been fully exploited in the exchange rate exposure literature.

The purpose of this paper is to investigate the effect of the replacement of natural coarse aggregate (NCA) with different percentages of recycled coarse aggregate (RCA) on properties of low calcium fly ash (FA)-based geopolymer concrete (GPC) cured at oven temperature. Further, this paper aims to study the effect of partial replacement of FA by ground granulated blast slag (GGBS) in GPC made with both NCA and RCA cured under ambient temperature curing.

M25 grade of ordinary Portland cement (OPC) concrete was designed according to IS: 10262-2019 with 100% NCA as control concrete. Since no standard guidelines are available in the literature for GPC, the same mix proportion was adopted for the GPC by replacing the OPC with 100% FA and W/C ratio by alkalinity/binder ratio. All FA-based GPC mixes were prepared with 12 M of sodium hydroxide (NaOH) and an alkalinity ratio, i.e. sodium hydroxide to sodium silicate (NaOH:Na₂SiO₃) of 1:1.5, subjected to 90^°C temperature for 48 h of curing. The NCA were replaced with 50% and 100% RCA in both OPC and GPC mixes. Further, FA was partially replaced with 15% GGBS in GPC made with the above percentages of NCA and RCA, and they were given ambient temperature curing with the same molarity of NaOH and alkalinity ratio.

The workability, compressive strength, split tensile strength, flexural strength, water absorption, density, volume of voids and rebound hammer value of all the mixes were studied. Further, the relationship between compressive strength and other mechanical properties of GPC mixes were established and compared with the well-established relationships available for conventional concrete. From the experimental results, it is found that the compressive strength of GPC under ambient curing condition at 28 days with 100% NCA, 50% RCA and 100% RCA were, respectively, 14.8%, 12.85% and 17.76% higher than those of OPC concrete. Further, it is found that 85% FA and 15% GGBS-based GPC with RCA under ambient curing shown superior performance than OPC concrete and FA-based GPC cured under oven curing.

The scope of the present paper is limited to replace the FA by 15% GGBS. Further, only 50% and 100% RCA are used in place of natural aggregate. However, in future study, the replacement of FA by different amounts of GGBS (20%, 25%, 30% and 35%) may be tried to decide the optimum utilisation of GGBS so that the applications of GPC can be widely used in cast in situ applications, i.e. under ambient curing condition. Further, in the present study, the natural aggregate is replaced with only 50% and 100% RCA in GPC. However, further investigations may be carried out by considering different percentages between 50 and 100 with the optimum compositions of FA and GGBS to enhance the use of RCA in GPC applications. The present study is further limited to only the mechanical properties and a few other properties of GPC. For wider use of GPC under ambient curing conditions, the structural performance of GPC needs to be understood. Therefore, the structural performance of GPC subjected to different loadings under ambient curing with RCA to be investigated in future study.

The replacement percentage of natural aggregate by RCA may be further enhanced to 50% in GPC under ambient curing condition without compromising on the mechanical properties of concrete. This may be a good alternative for OPC and natural aggregate to reduce pollution and leads sustainability in the construction.