Search results

The purpose of this paper is to examine the country-of-origin (COO) effect on product evaluation to determine the different effects of COO in Asian nations.

The authors focus on automobiles as the target product category and conduct consumer surveys in three Asian countries – China, Japan, and South Korea – and the USA. Since these four countries are the major global production bases and consumption markets, the authors can examine the reciprocal effects of COO across countries. The authors propose a hierarchical conjoint analysis and estimate parameters. For the attributes of conjoint analysis, the authors incorporate both the COO of products and other functional aspects such as price and fuel consumption to compare their effects on consumer evaluation.

The authors find different tendencies in each country’s COO effect. Further, the authors discuss the factors affecting consumer evaluation in each country based on the country’s culture and general product images.

The authors’ contributions to the literature are as follows. First, in the research design, the authors incorporate COO information as an attribute of automobiles. This enables us to compare the COO effect with the effects of other functional aspects. The authors find that the COO effect is substantially the same as the effect of other functional attributes. Second, the authors assume a hierarchical structure in the conjoint analysis and discuss the different preferences in each country. This hierarchical structure enables to extract the reciprocal effects of COO across countries.

China's economy has transformed from a high-speed growth phase to a high-quality development phase. The agriculture sector has grown substantially since the economic reform in 1978. Considering the five-year plan (FYP) as a collection of policies, this study explores the relationship between the FYP and agricultural total factor productivity (TFP).

This study uses 31 provincial-level panel data of the five FYPs from 1996 to 2020. The data envelopment analysis (DEA) is used to compute Malmquist productivity indexes. The authors analyze the temporal and spatial changes and convergences of China's agricultural TFP, and investigate the impact of economic planning on China's agricultural TFP and its regional difference.

There is a slow but upward growth trend in China's agricultural TFP. The technical change has played a leading role in the growth of China's agricultural TFP. The agricultural TFP of all provinces has shown a “catch-up” effect and is developing toward their respective steady-state levels. The regional difference in productivity growth among the eastern, central and western regions exists. Test results show that the FYP has a positive effect on the agricultural TFP, and the effect has obvious regional heterogeneity. The FYP also plays a positive role in the gross value of agricultural output, and the impact effect is greater than that on the improvement of agricultural productivity.

There are many forms of industrial policy in China, among which the FYP is the guiding document of industrial policy, which makes a systematic plan for industrial development in the subsequent five years. The development objectives, guidelines and overall deployment for agriculture in the FYP not only describe the general context of China's agricultural development but also show the key ideas of agricultural development. Therefore, this study explores its impact on agricultural quality development from the perspective of FYP. The results provide evidence for examining the governance performance of the government and the objective evaluation and restraint of the FYP. As agriculture moves toward the stage of high-quality development, the Chinese government should strengthen the critical guiding role of the FYP and pay attention to quality indicators such as technical progress, efficiency improvement and regional coordination in the formulation of the FYP.

This study aims to examine how different modes of knowledge flows affect the changes of asset specificity and how ownership control moderates the relationship between knowledge flows and asset specificity in the open innovation paradigm.

This paper selects information technology outsourcing as the research base. It uses the feasible weighted least squares modeling method for its analysis and has collected the data from 2,369 research and development contracts of multinational vendor firms in China.

The coupled and outbound knowledge flows have a direct and positive effect on asset specificity. Moreover, the results show that weak corporate control has significant moderating effects on the relationship between both coupled and outbound knowledge flows and asset specificity; the strong control positively moderates the relationship between outbound knowledge flows and asset specificity.

In open innovation, firms build a higher degree of asset specificity to maximize the efficiency of knowledge flows, which then helps them to enhance innovation capacity and market performance.

Preceding studies have tended to examine the influences of asset specificity as an independent variable in a closed innovation paradigm. Asset specificity is hence often left as the antecedent “black box.” This paper, however, opens the “black box” of asset specificity, which is set as a dependent variable, by investigating the influences of knowledge flows on the asset specificity in the context of open innovation. It also reinterprets the role of asset specificity by adopting the lens of open innovation theory.

This study aims to obtained the failure probability distributions of subsystems for industrial robot and filtrate its fault data considering the complicated influencing factors of failure rate for industrial robot and numerous epistemic uncertainties.

A fault data screening method and failure rate prediction framework are proposed to investigate industrial robot. First, the failure rate model of the industrial robot with different subsystems is established and then the surrogate model is used to fit bathtub curve of the original industrial robot to obtain the early fault time point. Furthermore, the distribution parameters of the original industrial robot are solved by maximum-likelihood function. Second, the influencing factors of the new industrial robot are quantified, and the epistemic uncertainties are refined using interval analytic hierarchy process method to obtain the correction coefficient of the failure rate.

The failure rate and mean time between failure (MTBF) of predicted new industrial robot are obtained, and the MTBF of predicted new industrial robot is improved compared with that of the original industrial robot.

Failure data of industrial robots is the basis of this prediction method, but it cannot be used for new or similar products, which is the limitation of this method. At the same time, based on the series characteristics of the industrial robot, it is not suitable for parallel or series-parallel systems.

This investigation has important guiding significance to maintenance strategy and spare parts quantity of industrial robot. In addition, this study is of great help to engineers and of great significance to increase the service life and reliability of industrial robots.

This investigation can improve MTBF and extend the service life of industrial robots; furthermore, this method can be applied to predict other mechanical products.

This method can complete the process of fitting, screening and refitting the fault data of the industrial robot, which provides a theoretic basis for reliability growth of the predicted new industrial robot. This investigation has significance to maintenance strategy and spare parts quantity of the industrial robot. Moreover, this method can also be applied to the prediction of other mechanical products.

This paper aims to successfully synthesize three-dimensional spindle-like Au functionalized Co₃O₄-ZnO nanocomposites; characterize the structure, morphology and surface chemical properties of the products; study the effect of Au NPs doping concentration, operating temperature different gas to, sensing properties; and introduce an attractive gas sensor for acetone detection.

Au NPs functionalized Co₃O₄-ZnO nanocomposite was prepared by coprecipitation and impregnation methods; the structure and surface chemical property of the products were characterized by XRD, SEM, TEM, UV-Vis, BET and XPS. The sensing ability of Au@Co₃O₄-ZnO for acetone and mechanism was analyzed systematically.

The results of gas sensing tests show that the unique component structure, Schottky junction and catalytic effect of Au functionalization make it have low operating temperature, excellent selectivity, high response (10 ppm, 56) and rapid response recovery time.

All the characterization and test data of the prepared materials are provided in this paper and reveals the gas sensing mechanism of the gas sensor.

The detection limit is 2.92–100 ppb acetone. It is promising to be applied in low-power, micro detection and miniature acetone gas sensors.

The gas sensor prepared has a lower working temperature and low detection limit, so it has promising application prospects in low-concentration acetone detection and early warning.

The unique component structure, Schottky junction and catalytic effect of Au functionalization Co₃O₄-ZnO make it have low operating temperature, excellent selectivity and rapid response recovery time.

Epoxy zinc-rich coatings are widely used in harsh environments because of the long-lasting cathodic protection of steel surfaces. The purpose of this paper is to use flake zinc powder instead of the commonly used spherical zinc powder to reduce the zinc powder content.

In this paper, the authors have prepared an anticorrosive zinc-rich coating using a flake zinc powder instead of the conventional spherical zinc powder. The optimal dispersion of scaly zinc powder in zinc-rich coatings has been explored by looking at the surface and cross-sectional morphology and studying the cathodic protection time of the coating.

The final epoxy zinc-rich coating with 35 Wt.% flake zinc powder content was prepared using sand-milling dispersions. It has a similar cathodic protection time and salt spray resistance as the 60 Wt.% spherical zinc-rich coating, with a higher low-frequency impedance modulus value.

This study uses flake zinc powder instead of the traditional spherical zinc powder. This reduces the amount of zinc powder in the coating and improves the corrosion resistance of the coating.

This paper aims to investigate the effect and mechanism of O atom single doping, Ce and O atoms co-doping on the interfacial microscopic behavior of brazed Ni-Cr/diamond.

Using first-principles calculations, the embedding energy, work of separation, interfacial energy and electronic structures of Ni-Cr-O/diamond and Ni-Cr-O-Ce/diamond interface models were calculated. Then, the effect of Ce and O co-doping was experimentally verified through brazed diamond with CeO₂-added Ni-Cr filler alloy.

The results show that O single-doping reduces the interfacial bonding strength between Ni-Cr filler alloy and diamond but enhances its interfacial stability to some extent. However, the Ce and O co-doping simultaneously enhances the interfacial bonding strength and stability between Ni-Cr filler alloy and diamond. The in-situ formed Ce-O oxide at interface impedes the direct contact between diamond and Ni-Cr filler alloy, which weakens the catalytic effect of Ni element on diamond graphitization. It is experimentally found that the fine rod-shaped Cr₃C₂ and Cr₇C₃ carbides are generated on diamond surface brazed with CeO₂-added Ni-Cr filler alloy. After grinding, the brazed diamond grits, brazed with CeO₂-added Ni-Cr filler alloy, present few fracture and the percentage of intact diamond reaches 67.8%. Compared to pure Ni-Cr filler alloy, the brazed diamond with CeO₂-added Ni-Cr filler alloy exhibit the better wear resistance and the slighter thermal damage.

Using first-principles calculations, the effect of Ce and O atoms co-doping on the brazed diamond with Ni-Cr filler alloy is investigated, and the calculation results are verified experimentally. Through the first-principles calculations, the interface behavior and reaction mechanism between diamond and filler alloy can be well disclosed, and the composition of filler alloy can be optimized, which will be beneficial for synergistically realizing the enhanced interface bonding and reduced thermal damage of brazed diamond.

The purpose of this paper is to enhance the compatibility of titanium dioxide in epoxy resins and thus the corrosion resistance of the coatings.

In this work, TiO₂ was modified by the mechanochemistry method where mechanical energy was combined with thermal energy to complete the modification. The stability of modified TiO₂ in epoxy was analyzed by sedimentation experiment. The modified TiO₂-epoxy coating was prepared, and the corrosion resistance of the coating was analyzed by open circuit potential, electrochemical impedance spectroscopy and neutral salt spray test.

High-temperature mechanical modification can improve the compatibility of TiO₂ in epoxy resin. At the same time, the modified TiO₂-epoxy coating showed better corrosion resistance. Compared to the unmodified TiO₂-epoxy coating, the coating improved the dry adhesion force by 61.7% and the adhesion drop by 33.3%. After 2,300 h of immersion in 3.5 Wt.% NaCl solution, the coating resistance of the modified TiO₂ coating was enhanced by nearly two orders of magnitude compared to the unmodified coating.

The authors have grafted epoxy molecules onto TiO₂ surfaces using a high-temperature mechanical force modification method. The compatibility of TiO₂ with epoxy resin is enhanced, resulting in improved adhesion of the coating to the substrate and corrosion resistance of the coating.

The objective of this paper is to investigate the impact of the information sharing of the dynamic demand on green technology innovation and profits in supply chain from a long-term perspective.

The authors consider a supply chain consisting of a manufacturer and a retailer. The retailer has access to the information of dynamic demand of the green product, whereas the manufacturer invests in green technology innovation. Differential game theory is adopted to establish three models under three different scenarios, namely (1) decentralized decision without information sharing of dynamic demand (Model N-D), (2) decentralized decision with information sharing of dynamic demand (Model S-D) and (3) centralized decision with information sharing of dynamic demand (Model S-C).

The optimal equilibrium results show that information sharing of dynamic demand can improve the green technology innovation level and increase the green technology stocks only in centralized supply chain. In the long term, the information sharing of dynamic demand can make the retailer more profitable. If the influence of green technology innovation on green technology stocks is great enough or the cost coefficient of green technology innovation is small enough, the manufacturer and decentralized supply chain can benefit from information sharing. In centralized supply chain, the value of demand information sharing is greater than that of decentralized supply chain.

The authors used game theory to investigate demand information sharing and the green technology innovation in a supply chain. Specially, the demand information is dynamic, which is a variable that changes over time. Moreover, our research is based on a long-term perspective. Thus, differential game is adopted in this paper.