Studies of zinc content reduction using flake zinc powder in epoxy zinc-rich coatings

Abstract

Purpose

Epoxy zinc-rich coatings are widely used in harsh environments because of the long-lasting cathodic protection of steel surfaces. The purpose of this paper is to use flake zinc powder instead of the commonly used spherical zinc powder to reduce the zinc powder content.

Design/methodology/approach

In this paper, the authors have prepared an anticorrosive zinc-rich coating using a flake zinc powder instead of the conventional spherical zinc powder. The optimal dispersion of scaly zinc powder in zinc-rich coatings has been explored by looking at the surface and cross-sectional morphology and studying the cathodic protection time of the coating.

Findings

The final epoxy zinc-rich coating with 35 Wt.% flake zinc powder content was prepared using sand-milling dispersions. It has a similar cathodic protection time and salt spray resistance as the 60 Wt.% spherical zinc-rich coating, with a higher low-frequency impedance modulus value.

Originality/value

This study uses flake zinc powder instead of the traditional spherical zinc powder. This reduces the amount of zinc powder in the coating and improves the corrosion resistance of the coating.

Citation

Liu, Y., Wang, J., Cai, H., Shao, Y., Xu, Z., Wang, Y. and Wang, J. (2023), "Studies of zinc content reduction using flake zinc powder in epoxy zinc-rich coatings", Anti-Corrosion Methods and Materials, Vol. 70 No. 6, pp. 469-477. https://doi.org/10.1108/ACMM-07-2023-2861