Search results

In this paper, the uncertainties important components and the structure status are obtained by using the condition monitoring, expert groups and multiple membership functions by creating a fuzzy system in MATLAB software.

In the form of fuzzy type, the average structural safety must be followed to replace the damages or to absolutely control the decision-making. Uncertainty in the functionality of hydraulic automated guided vehicles (AGVs), without knowing the reliability of pieces, can cause failure in the manufacturing process. It can be controlled by the condition monitoring pieces done by measurement errors and ambiguous boundaries.

As a result, this monitoring could increase productivity with higher quality in delivery in flexible manufacturing systems with an increase of 70% reliability mutilation for the hydraulic AGV parts.

Hydraulic AGVs play a vital role in flexible manufacturing in recent years. Lately, several strategies for maintenance and repairing of hydraulic AGVs exist in the industry but are still confronted with many uncertainties. The hydraulic AGV is faced with uncertainty after 10 years of working in terms of reliability. Reconstruction of the old parts with the new parts may not have the quality and durability.

This study aims to model the nanofluid flow in microchannel heat sinks having the same length and hydraulic diameter but different cross-sections (circular, trapezoidal and square).

The nanofluid is graphene nanoplatelets-silver/water, and the heat transfer in laminar flow was investigated. The range of coolant Reynolds number in this investigation was 200 ≤ Re ≤ 1000, and the concentrations of nano-sheets were from 0 to 0.1 vol. %.

Results show that higher temperature leads to smaller Nusselt number, pressure drop and pumping power, and increasing solid nano-sheet volume fraction results in an expected increase in heat transfer. However, the influence of temperature on the friction factor is insignificant. In addition, by increasing the Reynolds number, the values of pressure drop, pumping power and Nusselt number augments, but friction factor diminishes.

Data extracted from a recent experimental work were used to obtain thermo-physical properties of nanofluids.

The effects of temperature, microchannel cross-section shape, the volume concentration of nanoparticles and Reynolds number on thermal and hydraulics behavior of the nanofluid were investigated. Results are presented in terms of velocity, Nusselt number, pressure drop, friction loss and pumping power in various conditions. Validation of the model against previous papers showed satisfactory agreement.

This report offers the detailed investigation of Couette–Poiseuille flow of nanoliquid with varying viscosity. The analysis is carried out by considering flow between two parallel plates in a rotating permeable channel with the aid of nonlinear thermal radiation and Hall effect. The predominant equations governing the physical phenomenon are demonstrated using the Buongiorno model.

Numerical computation for the demonstrated physical problem is achieved through the implementation of the Runge–Kutta–Fehlberg fourth–fifth-order method along with shooting technique.

The theoretical view of Brownian motion, nonlinear radiation, Hall effect and thermophoresis parameter is presented graphically.

It is revealed that flow velocity increases with the upper wall motion parameter and magnetic field. Also, it is established that an increase in the Nusselt number is achieved for increasing values of nonlinear radiation parameter.

This study aims to investigate the flow behavior of aluminum oxide–water nanofluid with variable viscosity flowing through the microchannel parallel with the ground, with low aspect ratio. The study focuses on the first and second law analyses of Poiseuille flow using water as the base fluid with alumina nanoparticles suspended in it. Combined effects of thermal radiation, viscous dissipation, variable viscosity, nanoparticle shape factor and volume fraction on the thermal performance are studied and the in-built irreversibility in the process is examined.

The governing equations with dimensions are reduced to non-dimensional equations by using dimensionless quantities. Then, the Runge–Kutta–Fehlberg shooting scheme tackles the present non-linear equations.

The outcomes of the present analysis reveal that the activation energy parameter with its increase, depletes the exergetic effectiveness of the system, thus defending the fact to keep the activation energy parameter the lowest as possible for the system efficiency. In addition, thermal radiation and Biot number enhance the release of heat energy, thereby cooling the system. Bejan number graph exhibits the decreasing behavior for the increased nanoparticle shape factor, whereas the temperature enhances with the rise in nanoparticle shape factor.

The effects of nanoparticle shape factor in Poiseuille flow for alumina–water nanoliquid in low aspect ratio microchannel is inspected at the earliest. Exergetic effectiveness of the system is studied and heat transfer characteristics are explored for thermal radiation effect and activation energy parameter. Besides, BeηSphere>BeηBlades.

This study aims to expose the flow phenomena and entropy generation during a; magnetohydrodynamic (MHD) Poiseuille flow of water-based nanofluids (NFs) in a porous channel subject to hydrodynamic slip and convective heating boundary conditions. The flow caused by the uniform pressure; gradient between infinite parallel plates is considered steady and fully developed. The nanoparticles; namely, copper, alumina and titanium oxide are taken with pure water as the base fluid. Viscous dissipation and Joule heating impacts are also incorporated in this investigation.

The reduced governing equations are solved analytically in closed form. The physical insights of noteworthy parameters on the important flow quantities are demonstrated through graphs and analyzed elaborately. The thermodynamic analysis is performed by calculating entropy generation; rate and Bejan number. A graphical comparison between solutions corresponding to NFs and regular fluid in the channel is also provided.

The analysis of the results divulges that entropy generation minimization can be achieved by an appropriate combination of the geometrical and physical parameters of thermomechanical systems. It is reported that ascent in magnetic parameter number declines the velocity profiles, while the inverse pattern is witnessed with augmentation in hydrodynamic slip parameters. The temperature dissemination declines with the growth of Biot numbers. It is perceived that the entropy generation rate lessens with an upgrade in magnetic parameter, whereas the reverse trend of Bejan number is perceived with expansion in magnetic parameter and Biot number. The important contribution of the result is that the entropy generation rate is controlled with an appropriate composition of thermo-physical parameter values. Moreover, in the presence of a magnetic field and suction/injection at the channel walls, the shear stresses at the channel walls are reduced about two times.

In various industrial applications, minimizing entropy generation plays a significant role. Miniaturization of entropy is the utilization of the energy of thermal devices such as micro heat exchangers, micromixers, micropumps and cooling microelectromechanical devices.

An attentive review of the literature discloses that quite a few studies have been conducted on entropy generation analysis of a fully developed MHD Poiseuille flow of NFs through a permeable channel subject to the velocity slip and convective heating conditions at the walls.