Search results

This paper aims to study the influence of microparticles on the surface cavitation behavior of 2Cr3WMoV steel; microparticle suspensions of different concentration, particle size, material and shape were prepared based on ultrasonic vibration cavitation experimental device.

2Cr3WMoV steel was taken as the research object for ultrasonic cavitation experiment. The morphology, quantity and distribution of cavitation pits were observed and analyzed by metallographic microscope and scanning electron microscope.

The study findings showed that the surface cavitation process produced pinhole cavitation pits on the surface of 2Cr3WMoV steel. High temperature in the process led to oxidation and carbon precipitation on the material surface, resulting in the “rainbow ring” cavitation morphology. Both the concentration and size of microparticles affected the number of pits on the material surface. When the concentration of microparticles was 1 g/L, the number of pits reached the maximum, and when the size of microparticles was 20 µm, the number of pits reached the minimum. The microparticles of Fe3O4, Al2O3, SiC and SiO2 all increased the number of pits on the surface of 2Cr3WMoV steel. In addition, the distribution of pits of spherical microparticles was more concentrated than that of irregularly shaped microparticles in turbidity.

Most of the current studies have not systematically focused on the effect of each factor of microparticles on the cavitation behavior when they act separately, and the results of the studies are more scattered and varied. At the same time, it has not been found to carry out the study of microparticle cavitation with 2Cr3WMoV steel as the research material, and there is a lack of relevant cavitation morphology and experimental data.

The purpose of this study was to improve the overall equipment effectiveness (OEE) of the production process of the shredder operation of ABC company, an industrial waste management company which supplies pre-processed industrial waste as alternative fuel to a cement plant.

This case study investigated all possible availability and performance losses that caused the shredder system’s OEE and various problem-solving techniques, such as root cause analysis and Pareto analysis, were used to find the root cause of the reduced OEE.

After analysing this case study, three significant loss factors were identified from all the availability and performance losses, which caused the shredder system’s OEE losses. Practical solutions were found for the effect of those loss factors to improve the machine’s OEE and productivity.

This case study has been concentrated on only analysing of losses and improvement of OEE in the production process and not about cost analysis between loss and improvements.

This paper shows how to improve the OEE of a production process through various problem-solving techniques by identifying its losses and how to achieve the best solutions for those losses in a practical manner.

Multiple topics often exist on social media platforms that compete for users' attention. To explore how users’ attention transfers in the context of multitopic competition can help us understand the development pattern of the public attention.

This study proposes the prediction model for the attention transfer behavior of social media users in the context of multitopic competition and reveals the important influencing factors of users' attention transfer. Microblogging features are selected from the dimensions of users, time, topics and competitiveness. The microblogging posts on eight topic categories from Sina Weibo, the most popular microblogging platform in China, are used for empirical analysis. A novel indicator named transfer tendency of a feature value is proposed to identify the important factors for attention transfer.

The accuracy of the prediction model based on Light GBM reaches 91%. It is found that user features are the most important for the attention transfer of microblogging users among all the features. The conditions of attention transfer in all aspects are also revealed.

The findings can help governments and enterprises understand the competition mechanism among multiple topics and improve their ability to cope with public opinions in the complex environment.

This paper aims to investigate sustainability-led innovation, focusing on the interplay between product and process innovation for sustainability goals and the underlying supplier–customer relationships. Thus, the paper delves into sustainability-led innovation and how it affects supplier–customer relationships, and vice versa, thus providing a twofold perspective.

The textile industry is the empirical context of this study, which is exploratory research based on in-depth, semi-structured interviews with entrepreneurs, managers and experts in the textile industry.

In the textile industry, sustainability-led product innovation concerns mainly product durability and performance, product recyclability and the use of waste for new product development. Process innovation deals with circular economy, traceability and water and chemical use minimization. The paper also shows how sustainability-led innovation is implemented in more technical terms and regarding supplier–customer relationships.

The paper adopts an original perspective on how processes take place in the relationships between suppliers and customers, where there is no dominance of one actor, but innovation emerges from interdependence and interaction. Such perspective allows to provide an in-depth analysis of the supplier–customer relationships and underlying dynamics that affect sustainability-led innovation; moreover, the authors study how such innovation impacts supplier–customer relationships and the underlying relational dynamics. The value of the paper also stands in delivering a real representation of the innovation processes grounded in the textile industry.

The primary objectives of the case study are to get the participants exposed to the issues of working capital which even profitable companies face on a day-to-day basis; give the participants an understanding of how to balance the, at times, conflicting objectives of increasing profits and sales through favorable credit terms; and expose them to the impact of increase in inventory levels and average collection period on margins in a period of slow growth. They will also learn about the concept of factoring and its uses.

The case study is about a group of companies engaged in education, steel fabrication and oil businesses owned by a single proprietor. The company was based in Fatehnagar which was part of Hyderabad district in the state of Telangana, India, and the case study traces the origins of the group from 1960s to 2021. The group was invested the surplus cash flows from the oil business to initiate and expand other businesses during this period. The economic downturn due to the COVID-19 pandemic had hit the company, particularly its oldest business – Noble Chemical Agency. The oil business was facing issues related to its growth and profitability, and the uncertainty around COVID-19-related restrictions had only augmented the fears of the management. The case study looks at issues and the dilemma which the owner of the company faced. The case study highlights various issues related to working capital management, especially related to receivables management and inventory levels faced by businesses during the slow-growth phase. It demonstrates how working capital management issues, if not resolved in time, can lead to insolvency of even a successful company with a sound business model.

The case study is meant for teaching in postgraduate management programs (Master of Business Administration and Postgraduate Diploma in Management) in the following courses: corporate finance/financial management course in the first year (the case study should be taught towards the end of the course); and management accounting courses in first year (the case study should be positioned in the middle of these courses). The case study can also be used to highlight issues related to working capital and small business management in a Management Development Programme (MDP) course for “Finance fundamentals for non-finance executives”.

Teaching notes are available for educators only.

CSS 1: Accounting and finance.

This paper aims to investigate the corrosion resistance of two types of coatings – one is ceria sol coating and the other is ceria sol coating modified by ZnO nanoparticles on 7075 aluminum alloy in 3.5% NaCl solution.

Aluminum alloys were dipped into ceria sol and ceria sol modified by ZnO nanoparticles separately and removed after 10 min from the solutions and dried at 110°C for 30 min and heated at 500 °C for 30 min to form the coatings. The coatings have been characterized by using field emission scanning electron microscopy (FE-SEM), electrochemical impedance spectroscopy (EIS), X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS). The EIS tests were performed in a corrosive solution of 3.5% NaCl.

The results showed that the coating of ceria sol modified by ZnO nanoparticles has higher corrosion resistance than the ceria sol coating and the bare sample. Also, the best efficiency is related to aluminum sample immersion after 1 h in NaCl corrosive solution for coating modified by ZnO nanoparticles.

In this research, the modification of ceria sol coating by ZnO nanoparticles had an effect on improving the corrosion behavior of aluminum alloy. It is also understood that modification of coatings is an effective parameter on corrosion resistance.

In this paper, the authors aim to study the effect of hydrogen on the pitting corrosion behavior of Incoloy 825, a commonly used material for heat exchanger tubes in hydrogenated heat exchangers.

The pitting initiation and propagation behaviors were investigated by electrochemical and chemical immersion experiments and observed and analyzed by scanning electron microscope and energy dispersive spectrometer methods.

The results show that hydrogen significantly affects the electrochemical behavior of Incoloy 825; the self-corrosion potential decreased from −197 mV before hydrogen charging to −263 mV, −270 mV and −657 mV after hydrogen charging, and the corrosion current density increased from 0.049 µA/cm² before hydrogen charging to 2.490 µA/cm², 2.560 µA/cm² and 2.780 µA/cm² after hydrogen charging. The pitting susceptibility of the material increases.

Hydrogen is enriched on the precipitate, and the pitting corrosion also initiates at that location. The synergistic effect of hydrogen and precipitate destroys the passive film on the metal surface and promotes pitting initiation.

This chapter traces the origin of racism and reviews the historical and contemporary debates around race and racialisation in western thought. There are persistent disagreements surrounding the origin and nature of racism. Because of the evolution of racist ideas, behaviours and institutional practices and policies, there are various views about the meaning and analytical application of racism. This chapter explores how ideas of race – understood as innate and immutable human differences that can be classified and ranked hierarchically based on race – has emerged in western history and evolved over time. It examines how this has influenced social and political practices and associated policies across the evolution of modernity. The chapter specifically discusses the Atlantic slave trade and how it shaped the historical development of race and racism within the context of colonialism. It concludes with a discussion and critical review of some of the racist systems and policies which have been enforced across different multiracial countries.

Celebrate Michael Buckland's impressive legacy to LIS by showing his humanity, generosity and versatility.

This article is walk through a scientific career in LIS. Through personal anecdotes and life history and building upon Michael Buckland's legacy, it summarises the author’s own work seen through the prism of her interactions with Buckland, leading to scholarly contributions articulating significant statements about the field of LIS as well as pointers to past relevant publications.

Michael Buckland has a unique way of putting an end to thorny LIS issues as well as being a documentator extraordinaire.

It is a personal account, as such cannot be evaluated through the classical norms of empirical research as there is no ground truth. This account shows how chance encounters with fellow scholars can have a lasting influence on one's academic career as well as wider impact in a field.

The purpose of this study is to enhance the functional properties of Hessian fabric through resin finishing. Hessian bags made of lignocellulosic jute fiber are commonly used to pack, store and transport agro-commodities, including horticultural crops such as rice, potato, onion and wheat. However, because of high water affinity, these bags undergo degradation in properties due to moisture release by the stored commodities themselves. Exposure to natural elements, e.g. rain and dew, also causes moisture absorption in hessian bags. Once the bag gets moistened, degradation of jute bags starts due to microbial attack, leading to loss in tensile strength and change in extensibility, leading to ultimate breakage in warp and weft directions of the fabric.

To overcome the degradation in the functional properties of hessian fabric due to exposure to moisture and microbial attack, the application of semi-synthetic polymeric materials was carried out.

Tenacity, bursting strength, puncture resistance, tear strength and breaking load, as well as life cycle of resin-treated jute fabric was found to be better than control jute.

To the best of the authors’ knowledge, no recent reports of resin finishing on jute (hessian) fabric with semi-synthetic resins are presently available, other than coating with rubber.