Search results

The purpose of the current paper is to develop a numerical methodology, based on the immersed boundary-lattice Boltzmann computational framework, for the Neumann and Dirichlet boundary conditions in problems involving natural and forced convection heat transfer.

The direct forcing immersed boundary method is extended to study the heat transfer by incompressible flow within the thermal lattice Boltzmann method (LBM) computational framework. The direct forcing and heating immersed boundary-LBM introduces a heat source term to the thermal LBM to account for the heat transfer occurring at the immersed boundary. New numerical treatments for the Neumann type of boundary condition and for the calculation of the local Nusselt number are developed. The developed methodologies have been applied to flows around immersed bodies with natural and forced convection, including steady as well as unsteady flows.

Numerical experiments involving immersed bodies in natural and forced convection have been performed in order to assess the validity of the direct heating IB-LBM. The flow cases studied also include steady and transient flow phenomena. Flow velocity field and isotherms have been used for qualitative comparisons with existing, published results. The surface averaged Nusselt number, Strouhal number, and lift coefficient (for the unsteady flow cases) have been used for quantitative comparison with published results. The results show that there are satisfactory agreements, qualitatively and quantitatively, between the results obtained by using the present method and those previously published.

Limited application of immersed boundary to thermal flows within the LBM has been studied by researchers; the few past studies were limited to Dirichlet boundary conditions and/or using of feedback forcing and heating approaches. In the current paper, the direct forcing and heating approach was used which helps to eliminate the arbitrary constants used in the feedback approaches. The developed new numerical treatments for the Neumann type of boundary condition and for the calculation of the local Nusselt number eliminate the need to determine surface normal and temperature gradient in the normal direction for heat transfer calculation, which is particularly beneficial in cases with deforming or changing boundaries.

The purpose of this paper is to present two efficient immersed boundary methods (IBM) for simulation of thermal flow problems. One method is for given temperature condition (Dirichlet type), while the other is for given heat flux condition (Neumann type). The methods are applied to simulate natural and mixed convection problems to check their performance. The comparison of present results with available data in the literature shows that the present methods can obtain accurate numerical results efficiently.

The paper presents two efficient IBM solvers, in which the effect of thermal boundary to its surrounding fluid is considered through the introduction of a heat source/sink term into the energy equation. One is the temperature correction‐based IBM developed for problems with given temperature on the wall. The other is heat flux correction‐based IBM for problems with given heat flux on the wall. Note that in this solver, the offset of derivative condition is directly used to correct the temperature field.

As compared with existing solvers, the temperature correction‐based IBM determines the heat source/sink implicitly instead of pre‐calculated explicitly, so that the boundary condition for temperature is accurately satisfied. To the best of the authors' knowledge, the work of heat flux correction‐based IBM is the first endeavour for application of IBM to solve thermal flow problems with Neumann (heat flux) boundary condition. It was found that both methods presented in this work can efficiently obtain accurate numerical results for thermal flow problems.

The two methods presented in this paper are novel. They can effectively solve thermal flow problems with Dirichlet and Neumann boundary conditions.

Turbomachinery, including pumps, are mainly designed to extract/produce energy from/to the flow. A major challenge in the numerical simulation of turbomachinery is the inlet flow rate, which is routinely treated as a known boundary condition for simulation purposes but is properly a dependent output of the solution. As a consequence, the results from numerical simulations may be erroneous due to the incorrect specification of the discharge flow rate. Moreover, the transient behavior of the pumps in their initial states of startup and final states of shutoff phases has not been studied numerically. This paper aims to develop a coupled procedure for calculating the transient inlet flow rate as a part of the solution via application of the control volume method for linear momentum. Large eddy simulation of a four-blade axial hydraulic pump is carried out to calculate the forces at every time step. The sharp interface immersed boundary method is used to resolve the flow around the complex geometry of the propeller, stator and the pipe casing. The effect of the spurious pressure fluctuations, inherent in the sharp interface immersed boundary method, is damped by local time-averaging of the forces. The developed code is validated by comparing the steady-state volumetric flow rate with the experimental data provided by the pump manufacturer. The instantaneous and time-averaged flow fields are also studied to reveal the flow pattern and turbulence characteristics in the pump flow field.

The authors use control volume analysis for linear momentum to simulate the discharge rate as part of the solution in a large eddy simulation of an axial hydraulic pump. The linear momentum balance equation is used to update the inlet flow rate. The sharp interface immersed boundary method with dynamic Smagorinsky sub-grid stress model and a proper wall model is used.

The steady-state volumetric flow rate has been computed and validated by comparing to the flow rate specified by the manufacturer at the simulation conditions, which shows a promising result. The instantaneous and time averaged flow fields are also studied to reveal the flow pattern and turbulence characteristics in the pump flow field.

An approach is proposed for computing the volumetric flow rate as a coupled part of the flow solution, enabling the simulation of turbomachinery at all phases, including the startup/shutdown phase. To the best of the authors’ knowledge, this is the first large eddy simulation of a hydraulic pump to calculate the transient inlet flow rate as a part of the solution rather than specifying it as a fixed boundary condition. The method serves as a numerical framework for simulating problems incorporating complex shapes with moving/stationary parts at all regimes including the transient start-up and shut-down phases.

The characteristics of fluid motions in micro-channel are strong fluid-wall surface interactions, high surface to volume ratio, extremely low Reynolds number laminar flow, surface roughness and wall surface or zeta potential. Due to zeta potential, an electrical double layer (EDL) is formed in the vicinity of the wall surface, namely, the stern layer (layer of immobile ions) and diffuse layer (layer of mobile ions). Hence, its competent designs demand more efficient micro-scale mixing mechanisms. This paper aims to therefore carry out numerical investigations of electro osmotic flow and mixing in a constricted microchannel by modifying the existing immersed boundary method.

The numerical solution of electro-osmotic flow is obtained by linking Navier–Stokes equation with Poisson and Nernst–Planck equation for electric field and transportation of ion, respectively. Fluids with different concentrations enter the microchannel and its mixing along its way is simulated by solving the governing equation specified for the concentration field. Both the electro-osmotic effects and channel constriction constitute a hybrid mixing technique, a combination of passive and active methods. In microchannels, the chief factors affecting the mixing efficiency were studied efficiently from results obtained numerically.

The results indicate that the mixing efficiency is influenced with a change in zeta potential (ζ), number of triangular obstacles, EDL thickness (λ). Mixing efficiency decreases with an increment in external electric field strength (Ex), Peclet number (Pe) and Reynolds number (Re). Mixing efficiency is increased from 28.2 to 50.2% with an increase in the number of triangular obstacles from 1 to 5. As the value of Re and Pe is decreased, the overall percentage increase in the mixing efficiency is 56.4% for the case of a mixing micro-channel constricted with five triangular obstacles. It is also vivid that as the EDL overlaps in the micro-channel, the mixing efficiency is 52.7% for the given zeta potential, Re and Pe values. The findings of this study may be useful in biomedical, biotechnological, drug delivery applications, cooling of microchips and deoxyribonucleic acid hybridization.

The process of mixing in microchannels is widely studied due to its application in various microfluidic devices like micro electromechanical systems and lab-on-a-chip devices. Hence, its competent designs demand more efficient micro-scale mixing mechanisms. The present study carries out numerical investigations by modifying the existing immersed boundary method, on pressure-driven electro osmotic flow and mixing in a constricted microchannel using the varied number of triangular obstacles by using a modified immersed boundary method. In microchannels, the theory of EDL combined with pressure-driven flow elucidates the electro-osmotic flow.

The purpose of this paper is to perform two-dimensional numerical simulation involving fluid-structure interaction of flexible filament. The filament is tethered to the bottom of a rectangular channel with oscillating fluid flow inlet conditions at low Reynolds number. The simulations are performed using a temporal second-order finite volume-based immersed boundary method (IBM). Further, to understand the relation between different aspect ratios i.e. ratio of filament length to channel height (Len/H) and fixed channel geometry ratio, i.e. ratio of channel height to channel length (H/Lc) on mixing and pumping capabilities.

The discretization of governing continuity and Navier–Stokes equation is done by finite-volume method on a staggered Cartesian grid. SIMPLE algorithm is used to solve fluid velocity and pressure terms. Two cases of oscillatory flow conditions are used with the flexible filament tethered at the center of bottom channel wall. The first case is sinusoidal oscillatory flow with phase shift (SOFPS) and second case is sinusoidal oscillatory flow without phase shift (SOF). The simulation results are validated with filament dynamics studies of previous researchers. Further, parametric analysis is carried to study the effect of filament length (aspect ratio), filament bending rigidity and Reynolds number on the complex deformation and behavior of flexible filament interacting with nearby oscillating fluid motion.

It is found that selection of right filament length and bending rigidity is crucial for fluid mixing scenarios. The phase shift in fluid motion is also found to critically effect filament displacement dynamics, especially for rigid filaments. Aspect ratio, suitable for mixing applications is dependent on channel geometry ratio. Symmetric deformation is observed for filaments subjected to SOFPS condition irrespective of bending rigidity, whereas medium and low rigidity filaments placed in SOF condition show severe asymmetric behavior. Two key findings of this study are: symmetric filament conformity without appreciable bending produces sweeping motion in fluid flow, which is highly suited for mixing application; and asymmetric behavior shown by the filament depicts antiplectic metachronism commonly found in beating cilia. As a result, it is possible to pin point the type of fluid motion governing fluid mixing and fluid pumping. The developed computational model can, thus, successfully demonstrate filament-fluid interaction for a wide variety of similar problems.

The present study uses a temporal second-order finite volume-based IBM to examine flexible filament dynamics for various applications such as fluid mixing. Also, it highlights the relationship between channel geometry ratio and filament aspect ratio and its effect on filament sweep patterns. The study further reports the effect of filament displacement dynamics with or without phase shift for inlet oscillating fluid flow condition.

The purpose of this paper is to provide the current state of the art in the development of a computer code combining an immersed boundary method with a conjugate heat transfer (CHT) approach, including some new findings. In particular, various treatments of the fluid-solid-interface conditions are compared in order to determine the most accurate one. Most importantly, the method is capable of computing a challenging three dimensional compressible turbulent flow past an air cooled turbine vane.

The unsteady Reynolds-averaged Navier–Stokes (URANS) equations are solved within the fluid domain, whereas the heat conduction equation is solved within the solid one, using the same spatial discretization and time-marching scheme. At the interface boundary, the temperatures and heat fluxes within the fluid and the solid are set to be equal using three different approximations.

This work provides an accurate and efficient code for solving three dimensional CHT problems, such as the flow through an air cooled gas turbine cascade, using a coupled immersed boundary (IB) CHT methodology. A one-to-one comparison of three different interface-condition approximations has shown that the two multidimensional ones are slightly superior to the early treatment based on a single direction and that the one based on a least square reconstruction of the solution near the IB minimizes the oscillations caused by the Cartesian grid. This last reconstruction is then used to compute a compressible turbulent flow of industrial interest, namely, that through an air cooled gas turbine cascade. Another interesting finding is that the very promising approach based on wall functions does not combine favourably with the interface conditions for the temperature and the heat flux. Therefore, current and future work aims at developing and testing appropriate temperature wall functions, in order to further improve the accuracy – for a given grid – or the efficiency – for a given accuracy – of the proposed methodology.

An accurate and efficient IB CHT method, using a state of the art URANS parallel solver, has been developed and tested. In particular, a detailed study has elucidated the influence of different interface treatments of the fluid-solid boundary upon the accuracy of the computations. Last but not least, the method has been applied with success to solve the well-known CHT problem of compressible turbulent flow past the C3X turbine guide vane.

The purpose of this paper is to present two different methods for the imposition of thermal boundary conditions (BCs) in the framework of two-phase flows: an immersed boundary method (IBM) and a Ghost cell method. Both methods are able to handle Dirichlet as well as Neumann BCs.

Direct numerical simulations of two-phase flows are performed where the thermal BCs at the phase boundary is accounted for with two different approaches.

Both methods are validated with the results obtained on a body-fitted mesh. Simulations of the three-dimensional flow and temperature field around a sphere demonstrate versatility and accuracy of both methods.

This is the first time Neumann BCs are imposed by means of an IBM with a direct heating approach employing regularized delta functions. The test cases considered may also serve as benchmarks for other studies.

This paper aims to describe a research effort towards the comprehension of the unsteady phenomena due to the deployment of high-lift devices at approach/landing conditions.

The work starts from a preexisting platform based on an immersed boundary (IB) method whose capabilities are extended to study compressible and viscous flows around moving/deforming objects. A hybrid Lagrangian-Eulerian approach is designed to consider the motion of multiple bodies through a fixed Cartesian mesh. That is, the cells’ volumes do not move in space but rather they observe the solid walls crossing themselves. A dynamic discrete forcing makes use of a moving least-square procedure which has been validated by simulating well-known benchmarks available for rigid body motions. Partitioned fluid-structure interactions (FSI) strategies are explored to consider aeroelastic phenomena. A shared platform, between the aerodynamic and the structural solvers, fulfils the loads’ transfer and drives the sequence of the operating steps.

The first part of the results is devoted to a basic two-dimensional study aiming at evaluating the accuracy of the method when simple rigid motions are prescribed. Afterwards, the paper discusses the solution obtained when applying the dynamic IB method to the rigid deployment of a Krueger-flap. The final section discusses the aeroelastic behaviour of a three-element airfoil during its deployment phase. A loose FSI coupling is applied for estimating the possible loads’ downgrade.

The IB surfaces are allowed to move less than one IB-cell size at each time-step de-facto restricting the Courant-Friedrichs-Lewy (CFL) based on the wall velocity to be smaller than unity. The violation of this constraint would impair the explicit character of the method.

The proposed method improves automation in FSI numerical analysis and relaxes the human expertise/effort for meshing the computational domain around complex three-dimensional geometries. The logical consequence is an overall speed-up of the simulation process.

The value of the paper consists in demonstrating the applicability of dynamic IB techniques for studying high-lift devices. In particular, the proposed Cartesian method does not want to compete with body-conforming ones whose accuracy remains generally superior. Rather, the merit of this research is to propose a fast and automatic simulation system as a viable alternative to classic multi-block structured, chimaera or unstructured tools.

The present study aims to develop a vortex method capable for solving the complex vortical flows past the moving/deforming bodies.

To achieve such a goal, some innovative work is conducted on the basis of vortex-in-cell (VIC) method that uses the improved semi-Lagrangian scheme. The penalization technique is incorporated with the VIC, which makes the complex boundaries of moving/deforming bodies readily treated. Iterative algorithm is further proposed for the penalization and used to solve the Poisson equation, which enhances the vorticity solution accuracy at the body boundary.

The developed method is used to simulate some distinct flows of different boundaries and features: the impulsively started circular cylinder flow represents the one-way coupling; the falling circular cylinder flow and ellipse leaf flow both represent the two-way coupling of moving boundary; the fish-like body flow represents the two-way fluid-structure interaction of deforming boundary. The vortical physics of the above flows are well revealed, and the developed method is proven capable in dealing with the complex fluid-structure interaction problems.

The penalization technique is incorporated with the semi-Lagrangian VIC method, which makes the complex boundaries of moving/deforming bodies readily treated. An iterative algorithm is further proposed for the penalization and used to solve the Poisson equation, which enhances the vorticity solution accuracy at the body boundary. The complex vortical physics of the moving/deforming body flows are well revealed, and the propulsive mechanism of fish-like swimmer is well illustrated with the present method.

The purpose of this study is to numerically investigate the influence of corner radius on the flow around two square cylinders in tandem arrangements at a Reynolds number of 100.

Six models of square cylinders with corner radii R/D = 0.0, 0.1, 0.2, 0.3, 0.4 and 0.5 (where R denotes the corner radius and D denotes the characteristic dimension of the body) were studied using an immersed boundary-lattice Boltzmann method, and the results were compared with those obtained using a two-dimensional unsteady finite volume method. The cylinders were mounted in a tandem configuration (1.5 ≤ L/D ≤ 10 where L denotes the in-line separation between the cylinder centers). The simulated models were quantitatively compared to the aerodynamic force coefficients and Strouhal number. Furthermore, qualitative analysis is presented in the form of flow streamlines and vorticity contours.

The R/D and L/D values were varied to observe the variation in the flow characteristics in the gap and wake regions. The numerical results revealed two different regimes over the spacing range. The drag force on the downstream cylinder was negative for all corner radii values when the cylinders were placed at L/D = 3.0 (a single-body system). Subsequently, a sudden increase was observed in the aerodynamic forces (drag and lift) when L/D increased. A different gap value was identified in the transformation from a single-body to a two-body system for different corner radii. To verify the single-body system, a simulation was carried out with a single cylinder having a longitudinal geometric dimension equal to the tandem arrangement (L/D + D). Furthermore, in a single-body regime, the total drag of a tandem cylinder was less than that of a single cylinder, thus demonstrating the benefits of using tandem structures. A significant reduction in the aerodynamic forces and drag force was achieved by rounding the sharp corners and placing the cylinders in close proximity. An appropriate configuration of the tandem cylinders with a rounded corner of R/D = 0.4 and 0.5 at L/D = 3.0 and the range is enhanced to L/D = 4.0 for 0.0 ≤ R/D < 0.4 to achieve adequate drag reduction.

To the best of the author’s knowledge, there is a paucity of studies examining the effect of corner radius on bluff bodies arranged in a tandem configuration.